• Korean Journal of Materials Research
• /
• v.8 no.4
• /
• pp.304-311
• /
• 1998

0.07%C-0.014%Ti-0.015Nb-0.005%B강 (강종 B)을 각각 TMCP처리하여 그 기계적 특성과 B의 거동을 조사하였다. Ta-B강이 Ti-Nb-B강보다 인장강도는 더 우수하였으나 충격 흡수에너지는 훨씬 더 낮았다. Ta-B강의 강도가 Ti-Nb-B강보다 더 우수한 이유는 Ta-B강에서의 Ta의 석출강화 효과가 Ti-Nb-B강에서의 Ti와 Nb의 석출강화 효과보다 더 크기 때문으로 생각된다. Ta-B강은 입내파괴, Ti-Nb-B강은 임계파괴의 파괴양상을 보여이며, Ti-Nb-B강이 Ta-B 강보다 더 큰 충격 흡수에너지를 나타내었다. TMCP에서는 항온변태시의 평형석출과는 달리 연속냉각방법을 사용하였기 때문에 B가 결정립계에 평형적 또는 비평형적으로 편석되어 준안정상으로 생각되는 연속적인 필름 형태의 붕화물을 형성한다. 또한, 냉각속도의 차이에 따라 석출물은 결정질이 되거자 비정질이 되었다. B의 함량이 많은 Ti-Nb-B강에서는 석출물이 비정질상이었다. 한편, B함량이 적은 Ta-B강에서는 B강에서는 결정립계에서 B가 관찰되지 않아는데, 이것은 결정립계에서의 B의 석출이 B의 함량에 매우 민감함을 의미하는 것이다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.4
• /
• pp.9-17
• /
• 2000

The crystal growth and dissolution rates were calculated by solving a model equation, which involved the dissolution of the metastable phase($\beta$-HNIW) and growth of the stable phase($\varepsilon$-HNIW), together with the mass balance equation. The model has been successfully used to simulate available kinetic data for the $\beta$$\longrightarrow$$\varepsilon$ polymorphic transformation via a solution phase. From the effectiveness factor based on the two-step model, it was found that the surface integration contribution to the process was comparatively small, and a diffusion dependency decreased with an increase of the mass fraction of chloroform in the mixed solvents of ethyl acetate and chloroform. Appling these kinetics in process simulation allowed for the prediction of the product size of $\varepsilon$-HNIW.

• Journal of the Korean Society for Heat Treatment
• /
• v.34 no.1
• /
• pp.1-9
• /
• 2021

The martensitic stainless steel has excellent corrosion resistance and higher strength by quenching and tempering heat treatment. It has been widely used as blade material due to these properties. The hardness and impact toughness of martensitic stainless steel depended strongly on tempering temperatures. The 12Cr martensite stainless steel (SS 410) tempered about 540℃ showed temper embrittlement. To know cause of temper embrittlement in terms of phase identification, a detailed analysis of electron diffraction patterns during TEM observations has been carried out on the <110>α-Fe and <113>α-Fe zone axes for temper embrittlement specimen. The double electron diffraction spots at 1/3(211) and 2/3(211) positions were observed. The lattice space between individual diffraction spots was about 3.5 Å and this value coincide with three times to α-bcc lattice space (1.17 Å). The area which found double diffraction spots was judged metastable "zone" similar to the omega phase and induced embrittlement of SS410 material.

• Transactions of Materials Processing
• /
• v.32 no.4
• /
• pp.191-198
• /
• 2023

We examined the martensitic transformation kinetics for metastable stainless steel during electrochemical polishing (EP) using different types of electrolytes. Martensite fraction measured with EBSD showed that the electrolyte with high relative permittivity exhibited comparably higher levels of martensitic transformation. The amount of charge build-up on the specimen surface during EP with different types of electrolytes was calculated using COMSOL multiphysics simulations to understand these phase transformation characteristics. The effect of charge build-up-induced stress was analyzed using previously published first-principles calculations. We discovered that the electrolyte with high relative permittivity accumulated a greater amount of charge build-up, resulting in a stronger driving force for stress-induced martensitic transformation.

• Journal of the Korean Vacuum Society
• /
• v.12 no.1
• /
• pp.25-34
• /
• 2003

Deposition behavior of hard amorphous carbon film was investigated by molecular dynamic simulation using Tersoff potential which was suggested for the interaction potential between carbon atoms. When high energy carbon atoms were collided on diamond (100) surface, dense amorphous carbon film could be obtained. Physical properties of the simulated carbon film were compared with those of the film deposited by filtered cathodic arc process. As in the experimental result, the most diamond-like film was obtained at an optimum kinetic energy of the incident carbon atoms. The optimum kinetic energy was 50 eV, which is comparable to the experimental observation. The simulated film was amorphous with short range order of diamond lattice. At the optimum kinetic energy condition, we found that significant amount of carbon atom were placed at a metastable site of distance 2.1 $\AA$. By melting and quenching simulation of diamond lattice, it was shown that this metastatic peak is Proportional to the quenching rate. These results show that the hard and dense diamond-like film could be obtained when the localized thermal spike due to the collision of high energy carbon atom can be effectively dissipated to the lattice.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.410-415
• /
• 2001

An analytical method has been developed which determines lead in steel samples by inductively coupled plasma mass spectrometry (ICP-MS) with sample introduction by the hydride generation. The lead hydride is not stable and requires and oxidant for the oxidation into metastable Pb(IV) before reduction to $PbH_4$ with $NaBH_4$. A study was carried out to find and optimum lead hydride generation condition for a sample solution with more than $1000{\mu}g/mL$ Fe matrix. $K_2Cr_2O_7$ was found to work as an efficient oxidant when more than $10{\mu}g/mL$ Fe matrix was present. Lactic acid was used with the oxidant as a complexing agent of the metastable Pb(IV) to enhance sensitivity. Optimum concentrations of the sample acidity, oxidant and lactic acid were different depending on the matrix concentration. The isotope dilution method was employed for the quantitation of lead. The determined Pb concentrations of the NIST steel SRM 361 and 362 were in good agreement with the certified values within the uncertainty range.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.2
• /
• pp.76-83
• /
• 1996

We have developed the unconventional robot arm which is composed of the two main parts, one is a ball screw and the other is a robot arm. The dynamic systems of the robot arm and ball screw are unstable systems coupled with each other. The ball screw mechanism is unstable system but controllable system. The robot arm's dynamics is quasi stable system when ball screw's angular position is zero, else, unstable system. Our system has the duality between stability and controllability at the view point of control. This duality causes difficulty to control of the robot arm using normal control law. We have investigated the location of the characteristic roots of the dynamic equation. And we have found out that the best condition for the control of the arm is quasi stable state. In this paper, we have proposed multiple control laws which are consist of three components to guarantee the stability and controllability simultaneously. The computer simulations were carried out based on VSC about the angular position control of the robot arm, and it is confirmed that the good performances could be obtained by using new controller.

• Economic and Environmental Geology
• /
• v.28 no.4
• /
• pp.327-335
• /
• 1995

Illite/smectite (I/S) in the Beaufort-Mackenzie Basin, Arctic Canada has been scrutinized on the basis of mineralogical analysis of 215 core and drill-cutting samples from 22 exploratory wells onshore and offshore. I/S in the Beaufort-Mackenzie Basin includes the following four types: random, a mixture of random and ordered, R1-ordered, and R>1-ordered I/S. A mixture of random and ordered I/S occurs in the transitional interval between random and R>1-ordered I/S, and may represent a metastable state in the ordering reaction. A widespread occurrence of the mixture in natural environments suggests that the ordering reaction may be a slow process that results in co-existence of reactants and products. K-saturation experiments show that layer charges of expandable layers in I/S are variable. High-charge expandable layers transform into illite-like layers upon simple K-saturation. K-saturation alters the composition and/or the degree of ordering in I/S, suggesting that illitization in nature can be transformational.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.174-174
• /
• 1999

Pt(001)의 깨끗한 표면은 재배열된 (5x20) 또는 (nxn) 구조를 갖는다. 이러한 재배열된 구조는 소？의 가스를 흡착에 대해서도 (1x1)구조로 다시 재배열되는 재배열인 쉽게 풀리는 준안정적 재배열 구조를 갖는 표면이다. Pt(100) 표면 위에 Ni과 같은 금속을 흡착시키는 경우도 동일하게 표면의 장력을 해소시켜 (1x1) 표면을 만든다. Pt와 Ni과 같은 덩어리 상태에서 Pt와 Ni가 질서있게 교차되어 배열되는 합금이 쉽게 이루어지는 물질들로 잘 알려져 있고, 이 합금은 Pt나 Ni와 동일한 규칙적인 fcc 구조를 갖는다. 따라서 Pt(100) 표면 위에 Ni를 흡착시키는 것은 Nm/Cu(100)과 같은 표면합금이나 Mn/Ag(1000에서 보이는 2층으로 된 표면 합금과 같은 표면 근방에 국한된 질서있는 표면 합금의 가능성이 있다. 또한 Ni/Pt(100)은 Ni과 Pt가 3대 1의 비로 조합될 때 나타나는 Ni3Pt의 층별구조인 표면에 Ni가 채워져 있고, 다음 층에 Ni와 Pt가 50%씩 질서 있게 섞여 있는 형태의 구조 즉 표면 밑 합금이 나타날 수 있는 가능성이 있는 물질계라는 점에서 관심을 갖게 한다. 본 연구는 LEED를 이용하여 Ni/Pt(100) 박막의 층별구조를 확인하고자 한다. PtNi 합금은 ATA(average t-matirx approximation)을 이용한 LEED 분석이 잘 적용되는 물질계로 알려져 있고, 본 연구는 ATA를 적용한 LEED I/V 분석을 통하여 Ni가 성장된 Pt(100) 표면의층별 농도비와 층별 구조를 구하고자 한다. 실험은 기본 압력이 3x10-11torr인 챔버에서 이루어졌으며, 증착시 압력은 5x10 torr이고, 증착은 열증발 방법을 이용하였다. Ni가 증착됨에 따라 (nxn) 재배열 표면에 기인한 extra spot들의 세기는 점차 감소하고 특정 증착량 이상에서부터 이 (nxn)의 spot들이 사라지고 깨끗한 (1x1) 패턴이 나타난다. 계속되는 증착량의 증가에 대해서도 이 (1x1) 형태는 유지되며, 표면의 질서에 따르는 c(2x20 패턴은 보이지 않았다. (1x1) LEED spot를 보임에도 불구하고 덩어리 절단 형태의 구조를 기반으로 한 LEED I/V 분석으로는 잘 맞출수 없었다. 이것은 Ni가 일정 이상 흡착된 경우 그 구조가 덩어리 절단 형태의 fcc(100) 구조와 벗어난 구조를 가지는 것으로 보인다.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.1
• /
• pp.49-53
• /
• 2011

Diamond-like carbon (DLC) films is a metastable form of amorphous carbon containing a significant fraction of Sp3 bond. DLC films have been characterized by a range of attractive mechanical, chemical, tribological, as well as optical and electrical properties. In this study DLC films were prepared by the RF magnetron sputter system on $SiO_2$ substrates using graphite target. The effects of the post annealing temperature on the Property variation of the DLC films were examined. The DLC films were annealed at temperatures ranging from 300 to $500^{\circ}C$ using rapid thermal process equipment in vacuum. The variation of electrical property and surface morphology as a function of annealing treatment was investigated by using a Hall Effect measurement and atomic force microscopy. Raman and X-ray photoelectron spectroscopy analyses revealed a structural change in the DLC films.