• Journal of the Korean earth science society
• /
• v.22 no.4
• /
• pp.292-300
• /
• 2001

By using two methods we obtained plane solutions for 5 groups of earthquakes including 13 events, which occurred in the central region of South Korea after December 1997. The first method is the composite fault plane solution by P wave polarity, and the second the solution by amplitude ratio (SV/P, SH/P, SV/SH) and P and S wave polarities. The two method results show similar results. The strike of fault is in the direction of NNE-SSW and WNW-ESE with the movement of strike-slip or strike-slip including thrust component. The compressional axis of the stress field dominantly trends ENE-WSW or NE-SW. The results are almost consistent with the other main events occurred in and around the Korean Peninsula.

• The Journal of Engineering Geology
• /
• v.1 no.1
• /
• pp.121-136
• /
• 1991

The focal mechanism of the Hongsung Earthquake (1978. Oct. 7, M$_L$=5.0, Latitude 36.62N, Longitude 1 26.67E) was evaulated using the polarity distribution of the P-Waveforms. Through the non-linear computer process, the compatibility of polarity distributions of the 9 P-Waveforms observed at teleseismic distances from the Hongsung Earthquake epicenter was investigated to those of the focal mechanism determined from the varying strike, dip and rake angles. The resultant values for the strike and dip angle of the principal fault plane, which apparently matches very well the sunface lineament of the Hongsung region, are determined to be about 247 degree and 78 degree with uncertainties, respectively. However, the rake angle of the focal mechanism has wide range of 40 degree to 160 degree, which is mainly due to the poor coverage of the azimuthal angle of the observed seismic stations. Due to the consistency of principal stress axes, the resultant focal mechanism could support the current stress regime of that region, which may be caused by subduction of the Pacific Plate under the Eurasia Plate along the Japan Trench. It also provides information of seismic source characteristics of the part of the Korean Peninsula for aseismic design criteria such as Site Specific Response Spectrum and Strong Ground Motion Time History for the nuclear power plants and related nuclear waste disposal facility sites.

• Economic and Environmental Geology
• /
• v.54 no.3
• /
• pp.389-397
• /
• 2021

Moryang Fault is geomorphologically observed as a linear fault valley from Angang through Moryang, Duckhyun and Wondong to Gimhae, and contacts with Yangsan Fault, being obliquely away to the east, at Angang disrict. The fault valley appears a V-shape feature with a width from 100 to 300 m, and has fragmental zones of the fault along the valley on a small scale. Nine fault-outcrop localities were found along the nine-kilometers valley between Daehyun-ri, Gyeongju, and Baenaemi-gogae, Yangdong-ri, Ulsan. The fault strikes the North-North-East to the Northeast and dips to the Northwest with high angles, and reveals it had been undergone predominantly sinistral reverse fault movement sense, left-lateral and right-lateral strike-slip sense in bedrocks. However, after unconsolidated sediments, there was the top-up-to-the-east dextral reverse fault movement.

• Economic and Environmental Geology
• /
• v.57 no.4
• /
• pp.363-370
• /
• 2024

To analyze the tectonic movements of the Geumwang Fault and its association with development of the Pungam Basin, the distributions of the gravity field and aeromagnetic field were interpreted. The low gravity zone (LGZ) around the Geumwang Fault shows an asymmetrical distribution, indicating sinistral (left-lateral) movement with the left side of the fault moving southeastward. The observed gravity anomaly suggests a displacement of approximately 9.3 km. The aeromagnetic distribution supports this horizontal displacement with very distinct magnetic characteristics. Using Euler deconvolution, the average depth of the Geumwang Fault was calculated to be about 1,000 meters, and it is estimated that the southwest side of the Pungam Basin is approximately 700 meters deeper than the northeast side. This strongly suggests that the Geumwang Fault has moved not only in a strike-slip but also in a dip direction. Such fault movement is characteristic of a hinge fault and has contributed to the formation of the basin through fault margin sag.

• Economic and Environmental Geology
• /
• v.28 no.6
• /
• pp.579-585
• /
• 1995

The Samkwang mine is Cretaceous gold-silver-bearing deposits located in the western part of the Ogcheon belt The ore deposits have been emplaced within granite gneiss of the Precambrian age. The Au-Ag deposits are hydrothermal-vein type, characterized by arsenic-, gold- and silver-bearing sulphides, in addition to the principal ore-forming sulphides arsenopyrite, galena, sphalerite, chalcopyrite, pyrite and pyrrhotite. Their proven reserves are 355,000 MT, and grades are 8.4 g Au/t and 13.6 g Ag/t. On the basis of their structural characters, the Au-Ag-bearing quartz veins are classified into three types of ore veins; (1) The Main vein shows $N40^{\circ}-80^{\circ}E$ strike and $55^{\circ}-90^{\circ}SE$ dip, (2) the Sangban vein shows E-W strike and $30^{\circ}-40^{\circ}S$ dip, and (3) the Gukseong vein has $N25^{\circ}-40^{\circ}W$strike and $65^{\circ}-80^{\circ}SW$ dip. The emplacements of the ore veins are closely related to the minimum stress axis $({\sigma}_3)$ during the strike-slip movement of the study area. The ore-bearing veins filled with extension fractures during strike-slip movements were sequentially emplaced as follows: I) When ${\sigma}_1$ operates obliquely to NE-series discontinous surface, the Main fault zone $(F_1)$ developes. 2) During the same time, extension fractures ($T_1$ Gukseong veins) take place. 3) When the fault progress continuously, the existing $T_1$, may be high angle and $T_2$ (Daehung vein) developes continuously. 4) When ${\sigma}_1$ changes to sinistral sense, $T_3$ (basic dyke) occurs. 5) When a reverse fault becomes active, the Sangban vein is branched from the Guksabong vein.

• Journal of the Korean earth science society
• /
• v.30 no.6
• /
• pp.699-708
• /
• 2009

Recently as the interest in the development of domestic ore deposits has increased, we can easily find some studies on exploration geophysics-based ore-deposit survey in literature. Based on the fact that mineralized zone are generally more conductive than surrounding media, electrical resistivity survey among several geophysical surveys has been applied to investigate metallic ore deposits. Most of them are grounded on 2-D survey. However, 2-D inversion may lead to some misinterpretation for 3-D geological structures. In this study, we investigate the feasibility of the 3-D electrical resistivity survey to 3-D vein-type ore deposits. We first simulate 2-D dipole-dipole survey data for survey lines normal to the strike and 3-D pole-pole survey data, and then perform 3-D inversion. For 3-D ore-body structures, we assume a width-varying dyke, a wedge-shaped, and a fault model. The 3-D inversion results are compared to 2-D inversion results. By comparing 3-D inversion results for 2-D dipole-dipole survey data to 3-D inversion results for 3-D pole-pole survey data, we could note that the 2-D dipole-dipole survey data yield better inversion results than the 3-D pole-pole data, which is due to the main characteristic of the pole-pole array. From these results, we are convinced that if we have certain information on the direction of the strike, it would be desirable to apply 2-D dipole-diple survey for the survey lines normal to the strike. However, in most cases, we do not have any information on the direction of the strike, because we already developed the ore deposit with the outcrops and the remaining ore deposits are buried under the surface. In that case, performing 3-D pole-pole electrical resistivity survey would be a reasonable choice to obtain more accurate interpretation on ore body structure in spite of low resolution of pole-pole array.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.3
• /
• pp.96-103
• /
• 2012

Annual energy consumption in detached houses are affected mainly by thermal performance of envelope. In particular the performance of glasses are critical due to global wanning and climatic change. Therefore, this research analyzes annual consumption of cooling and heating energy with various combination of U-value, shading coefficient and building orientation. The simulation results shows that shading coefficient of glazing contributes to the changes of proportion of heating and cooling energy demand and the optimized shading coefficient for minimizing energy consumption varies with buildings orientation.

• Economic and Environmental Geology
• /
• v.24 no.1
• /
• pp.57-62
• /
• 1991

This study presents results of thermal stress calculations around the uplifted province within the continental lithosphere. A set of thermal stresses for the uplifted provinces are calculated using by assumption of two dimensions along the extension of the strike. The calculations utilize thermoelastic displacement potential function. Thermal stress distribution-faulting conditions inferred from this study are consistent with the suggested surface heat flow and place an important constraint on the thermal state of the uplifted provinces within the continental lithosphere.

• Proceedings of the KSEG Conference
• /
• 2002.04a
• /
• pp.183-191
• /
• 2002

울산단층대 동변인 경북 경주시 마동 탑골 부근에 발달하는 제4기단층을 기재한다. 이 단층(이후 탑골단층)은 제3기초의 화강암과 제4기의 하성 사력층의 경계부 부근에서 여러 조의 단층들이 단층대를 이루며, 북북서 내지 남-북의 주향에 동측으로 $20^{circ}{\;}~45^{\circ}$ 의 경사를 보인다. 이 단층대는 서측으로부터 제4기 사력층 내의 역단층 3조와 제4기층을 화강암과 이를 부정합으로 덮는 제4기층이 올라탄 역단층 1조로 구별되며, 복합적인 역단층성 단층대의 양상을 보인다. 단층조선은 남동 방향($125^{\circ}$)으로 $20^{\circ}$ 침강한다. 이는 남동-북서 압축에 기인한 역단층성운동에 의해 생성된 것으로 보인다. 이 단층대는 불국사 일원에서 이미 알려진, 보다 서편에 발달하는 북서-남동 방향의 제4기단층선과는 다른 또 하나의 제4기단층선으로 확인된다.

• Journal of the Speleological Society of Korea
• /
• no.86
• /
• pp.1-7
• /
• 2008

지질구조는 카르스트의 층위와 구조상의 배열에 있어서 다양한 카르스트의 지형을 결정한다. 카르스트의 발달은 조산 및 조륙운동, 석회암층의 두께, 구성물질의 유형, 단층 및 습곡의 다양성, 주향 및 절리면의 빈도, 기후변화 및 기상환경, 수문 및 유수의 유형, 토지이용 현황 외 환경오염 등에 따라서 차별성을 나타낸다. 특히 지질구조에 따른 카르스트의 발달은 석회암 등이 유수의 작용에 커다란 용해작용의 영향을 받으므로 지질구조의 요인인 단층과 습곡현황과 절리와 균열 등에 의한 카르스트의 발달에 가장 큰 기여를 한다. 지질구조에 의하여 카르스트 지표지형에는 karren과 hum, mogotes, doline와 uvala, towers, springs, 구조적 유역, Closed Systems 등이 형성되고, 지하지형에는 Phreatic 동굴, Vados 동굴, Chambers, Multileveling cavities, Vertical shafts 등이 형성되는 다양성을 가진다. 한반도에서는 습곡구조에 의한 동공의 발달이 탁월하며, 다단계 및 급사면형 동굴의 유형이 다양하게 분포되고 있다.