• Journal of Auto-vehicle Safety Association
• /
• v.10 no.1
• /
• pp.45-51
• /
• 2018

There are some ambiguities of the information on the fuel economy provided to the consumers because the standard and the detailed regulations for the fuel economy of the two-wheeled vehicle have not been established in Korea. Since Korea has been a signatory of World Forum for Harmonization of Vehicle Regulations since 1998, it is possible to remove the ambiguities by adopting the WMTC (Worldwide-harmonized Motorcycle Test Cycle) measurement method for the fuel economy of the two-wheel vehicle. As a preliminary study on the WMTC mode fuel economy, road loads measured by coast down method and table method were compared for the two types of two-wheeled motorcycles on sales in domestic market. In the same model, it was confirmed that the deviation of WMTC mode fuel efficiency was below -5% between products. On the other hand, the difference of WMTC fuel economy exceeded 5% between the coast down method and table method.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.04a
• /
• pp.382-385
• /
• 2005

본 논문에서는 자기저항 센서를 이용한 자계기반 자율주행 시스템의 자계특성을 분석한다. 자율주행 시스템에서 가장 중요한 핵심기술은 자기원으로 구성된 도로를 주행하는 차량의 현재위치 파악이다. 따라서 자계 도로위의 차량의 현재위치를 검출하기 위한 시스템의 선행조건으로 센서와 자기원 사이에 존재하는 자계의 특성을 분석하기 위한 실험 장치를 설계하고 구성하였다. 그리고 자기원의 설치간격 및 기울기에 따른 자계의 3축성분과 데이터를 획득한다. 획득한 데이터를 이용하여 3축 성분에 따른 거리정보와 방향에 따른 자계의 변화를 분석한다.

• Journal of the Korean Society for Railway
• /
• v.6 no.2
• /
• pp.22-32
• /
• 2003

차륜없이 전자석에 의해 부상하고, 리니어모터에 의해 추진하는 시스템이다. HSST의 가장 큰 장점은, 접촉지짖에 의한 저소음 및 공기저항외에는 주행저항이 없기 때문에 고속주행이 가능하다. HSST도 당초에는 최고속도 200∼300km/h 정도의 시스템 HSST-200, HSST-300 타입을 목표로 개발을 진행해왔지만, 최근에는 급구배 및 급곡선 통과가 가능한 특성을 활용하여 도시내 교통을 대상으로 하는 최고속도 100km/h 정도의 시스템 HSST-100 타입 개발에도 주력함으로써 실용화에 달하고 있다. 경량전철로서의 취급하고 있는 시스템은 HSST-100 타입이다.(중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.541-549
• /
• 2018

This paper deals with the braking dynamic behavior of diesel electric locomotive pulling domestic cargo and passenger vehicles. Friction coefficient, pneumatic pressure, and running resistance affecting the braking system were tested. For the friction coefficient, the Dynamo test was performed with reference to UIC 541-4. The results are analyzed by multivariate regression and the relationship between braking force and ititial velocity is presented. The pneumatic pressure were classified into service braking and emergency braking. In order to reflect the characteristics of the brake valve and piping, the pressure rising over time was measured in the vehicle. In order to reflect the external force acting on the vehicle, we carried out the test of EN 14067-4 and presented the second order polynomial formula on a running resistance. The running resistance test results were compared with other countries. The dynamic behavior of a diesel electric locomotive running on a straight flat track based on vehicle resources, friction coefficient, braking pressure, and running resistance is simulated using the time integration presented in EN 14531-1. The simulation results were compared and verified with the vehicle braking test results. The results of this study can be used to analyze the dynamic braking behavior of a train. Also, it is expected that various parameters affecting braking in vehicle design can be analyzed and used as basic data for braking performance improvement.

• The tire
• /
• s.141
• /
• pp.2-10
• /
• 1989

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.25-31
• /
• 2009

In general, it is well known fact that the stone mastic asphalt (SMA) pavement has a high resistance against rutting. However, performance of SMA is not well measured by general method used in the laboratory. The objective of this study is to investigate an applicability of deformation strength ($S_D$) for performance estimation of SMA, and to find out the correlation between rut depth and dynamic stability, and $S_D$ of SMA. This study carried out wheel tracking test and Kim-test with optimum asphalt content (OAC) determined by mix design. The results indicated that the $S_D$ of SMA was very poorer than those of dense-graded asphalt mixtures. $S_D$ showed similar WT dynamic stability and rut-depth level. It was found that Kim-test was not reflected higher rutting resistance of SMA like as indirect tensile strength (ITS) test and Marshall stability test. Also, it was revealed that dynamic stability and rut-depth of WT had some problems to estimate rutting resistance of SMA mixtures.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.58-66
• /
• 1979

동력경운기용 두류의 무경운 파종기에 부착하여 사용하는 구절기중에서 소요견인력이 작고 구절작업정도가 양호한 구절기의 개발을 위한 기초자료를 얻기 위하여 구동식 토조에 인공강토를 채우고 원판형 및 호우형 구절기의 소요견인력과 이에 영향을 미치는 인자들의 관계를 구명코자 실내모형 확험을 실시하여 다음과 같은 결과를 얻었다. 원판형 구절기에 대하여 직경별로 조립각을 $8^{\circ}$ 와 $16^{\circ}$, 경심을 3 cm 와 6cm로 변화시키면서 2.75cm/sec의 속도로 견인력을 측정한 결과 원판의 직경이 약 28cm인 경우에 견인력이 최소로 나타났고, 직경이 이보다 크거나 작은 때는 견인력이 증가하는 경향을 나타냈으며 비저항도 대체로 비슷한 경향이었으나 원판의 직경이 약 30cm 일 때 최소로 나타났다. 종자파종의 심도조절을 목적으로 작구심(3cm 및 6 cm)과 견인력과의 관계를 조사하였던바, 경심과 견인력과의 관계는 거의 직선적인 변화를 나타냈으며 견인력에 영향을 미치는 인자중에서 경심의 영향이 가장 컸음을 알 수 있었다. 일반적으로 조립각 미 주행속도에 별 영향없이 경심 3cm 및 6 cm 공히 견인력은 직경 약 28 cm에서 , 비저항은 약 30cm에서 최소의 값을 나타내었다. 파종기의 작업성능과 관계가 깊은 주행속도 및 파시의 조절을 목적으로 원판의 조립각과 주행속도가 견인력에 미치는 영향을 조사했던 바, 조립각과 주행속도가 증가함에 따라 모두 견인력이 증가하는 경향을 나타내었으나 견인력에 미치는 영향은 주행속도가 더욱 크게 나타났다. 원판형 구절기와 호우형 구절기를 비교하기 위하여 쐐기각이$16^{\circ}$ 이고 리프트 각이 $20^{\circ}$ 인 호우형 구절기와 조건이 비슷한 조립각$16^{\circ}$ 의 원판형 구절기의 견인특성을 비교한 결과 직경 30cm 인 원판형의 경우는 비저항이 0.35-0.5kg/$cm^2$인데 비해 호우형의 경우는 0.71-1.02kg/$cm^2$로 나타나 호우형의 견인저항력이 평균 2 배정도 크게 나타났고 작구상태고 원판형의 경우보다 불량하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.813-819
• /
• 2006

Skid Resistance is a index to represent the friction between tire and road surface, which influences driving safety. Skid resistance varies with the conditions of tire, abrasion of road surface, vehicle speed, drying, wet and freezing condition of road surfaces. Especially, freezing occurs when temperature drops below $0^{\circ}C$ followed by snow or rain causes decrease of skid resistance. To recover the decreased skid resistance deicing work is applied. As a results of deicing works, freezing condition is changed into wet condition. However the wet road surfaces containing the remaining deicings agents may not show the skid resistance of normal wet condition. In this study, skid resistances in the condition of freezing, deicing process and deicing agents remained after snow-removal are evaluated. The test results, skid resistance recover quickly when Pre-wetted salt spreading and NaCl was used as deicing method. Skid resistance of Deicing agents remained on the road surface showed that concrete is higher than asphalt. superior effect. Recovery rate of skid resistance by comparison wet condition is 54~80%.

• Journal of the Korean Society for Railway
• /
• v.19 no.6
• /
• pp.709-716
• /
• 2016

To reduce the aerodynamic drag of high speed trains, aerodynamic drag of KTX-Sancheon was analyzed in detail according to individual components. Aerodynamic drag values of the power cars (front car, rear car) and bogies are about 42.9% and 10.1% of the total aerodynamic drag, respectively. For the aerodynamic drag reduction of a power-car, a nose shape optimization was conducted using the Broyden-Fletcher-Goldfarb-Shanno optimum method. Shape change of a power car and bogie fairing adaptation are used to reduce the aerodynamic drag of a car body. The aerodynamic drag of the optimized train-set dropped by 15.0% compared to the aerodynamic drag of the KTX-Sancheon; a running resistance reduction of 12% is expected at the speed of 350km/h.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.985-988
• /
• 2001

Revision and establish of KS(Korean Standards) is currently actively discussed. It is just the time for a new world class standards under the new system with WTO(World Trade Organization). This paper is a part of "Researchs on the Standards in Railway rolling stock Field", as one of KS establish projects. The aim of this study is to define the requirements of railway rolling stock-test methods for running resistance. In the former KS, there is no items matched with this purpose. Therefore a new part of KS is proposed.