• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.108-118
• /
• 2017

This paper presents experimental results of realtime sonar-based SLAM (simultaneous localization and mapping) using probability-based landmark-recognition. The sonar-based SLAM is used for navigation of underwater robot. Inertial sensor as IMU (Inertial Measurement Unit) and DVL (Doppler Velocity Log) and external information from sonar image processing are fused by Extended Kalman Filter (EKF) technique to get the navigation information. The vehicle location is estimated by inertial sensor data, and it is corrected by sonar data which provides relative position between the vehicle and the landmark on the bottom of the basin. For the verification of the proposed method, the experiments were performed in a basin environment using an underwater robot, yShark.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.3
• /
• pp.16-24
• /
• 2011

The vehicle electronic control system is being developed as the legal and social demand for ensuring driver's safety is rising. The various Driver Assistance Systems with various sensors such as radars, camera, and lasers are in practical use because of the falling price of hardware and the high performance of sensor and processer. In the preceding study of this research, the program was developed to recognize the experiment vehicle's driving lane and the cars nearby or approaching the experiment vehicle throughout the images taken by CCD camera. In addition, the 'dangerous driving analysis program' which is Vision System basis was developed to analyze the cause and consequence of dangerous driving. However, the Vision system developed in the previous studyhad poor recognition rate of lane and vehicles at the time of passing a tunnel, sunrise, or sunset. Therefore, through mounting the brightness response algorithm to the Vision System, the present study is aimed to analyze the causes of driver's dangerous driving clearly by improving the recognition rate of lane and vehicle, regardless of when and where it is.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.33-39
• /
• 2017

In mission-critical applications such as vehicular networks, distributed robotics, and other cyber-physical systems, the requirements for latency are more stringent than traditional applications. Among them, autonomous V2V communication is a rapidly emerging domain of applications with a few milliseconds' latency requirements. Today's systems utilizing 802.11p or LTE-direct standards are not primarily designed for ultra-low latency. Because the medium access function contributes to a significant portion of the total latency, it is necessary to modify Layer2 in order to solve the problem. Focusing on MAC layer, we developed a scalable and latency-guaranteed MAC by devising Autonomous TDMA (ATDMA) in which autonomous joining/leaving is allowed without scheduling by coordinator. We also evaluated the performance of the algorithm by comparing with the WAVE protocol.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.2
• /
• pp.9-14
• /
• 2011

This Paper proposed the prediction method of fuel consumption from vehicle informations through OBD-II Interface. We assumed RPM, TPS had a relationship with fuel consumption. We got the output as fuel-consumption from a vehicle RPM, TPS as input by using polynomial equation. We had modelling as quadric function with OBD-II data and fuel consumption data supported by automotive company in real. In order to verify the effectiveness of proposed method, 5 km real road-test was performed. The results showed that the proposed method can estimate precisely the fuel consumption from vehicle multi-data.

• Journal of Korean Society of Transportation
• /
• v.18 no.6
• /
• pp.47-61
• /
• 2000

차량추종모형은 차선변경모형과 함께 미시적 시뮬레이션 모형의 핵심 모형으로서 정확한 차량추종모형의 적용은 시뮬레이션 모형 분석결과의 신뢰성에 영향을 미친다. 기존의 차량추종모형은 대부분 가속상황과 감속상황에 동일한 모형을 적용하거나 자극부문과 민감도 부분은 거의 동일한 형태를 취하고 있으며, 가상자료를 토대로 모형이 개발되었다. 본 연구의 목적은 첫째, 모형을 추정하기 위한 연구체계를 구성하고, 둘째, 이러한 연구체계를 이용하여 신호교차로 미시적 시뮬레이션에 직접 적용이 가능한 차량추종모형을 정립하는 데 있다. 본연구에서는 이를 위해서 신호교차로에서 미시적 실측자료를 수집하였으며, 수집된 자료에서 통계적 기법을 통해서 모형 추정에 적합한 자료를 구축하였다. 현장에서 실측된 이산적인 원시자료는 차량추종모형 추정에 직접 이용할 수 없다. 따라서, 이산적 원시자료를 모형추정에 적합한 자료로 구성하기 위하여 비선형 곡선적합 알고리즘을 이용하여 연속적인 궤적함수를 구성하였고, 이를 통해서 모형추정에 필요한 선두차량과 후행차량의 현재시점과 반응시간 이후 시점에서의 위치, 순간 가속도와 순간속도 등을 도출하였다. 본 연구에서는 차량추종상황을 가속상황, 감속상황, 출발상황, 그리고 정지상황으로 구분하여 차량추종모형을 구축하였다. 가속상황과 감속상황에 대해서는 실측자료를 이용하여 모형을 추정하였으며, 출발상황과 정지상황에 대해서는 추정된 가/감속상황의 모형을 바탕으로 출발상황과 정지상황에서의 차량행태를 설명할 수 있는 모형을 구축하였다 또한, 민감도와 자극부분을 새롭게 정의하여 각 상황별로 미시적 실측자료를 이용하여 모형을 추정하였다. 이렇게 추정된 모형들 중에서 통계적 기법과 실측치와의 비교를 통해서 가장 적합한 모형을 선택하였다. 선택된 모형은 통계적 검정, 가상자료 그리고 실측치와의 비교를 통해서 분석하였으며, 분석결과 구축모형의 적용성은 우수한 것으로 분석되었다.

• Journal of Korean Society of Transportation
• /
• v.32 no.6
• /
• pp.675-685
• /
• 2014

This paper develops a differentiated pricing strategy over each segment of expressways based on the second-best pricing method for reducing congestion. To this end, a bi-level problem is proposed, in which the upper level of the model is formulated to determine toll level of each segment for minimizing traffic congestion, whereas the lower level of the model is formulated as a variable demand assignment problem. The sensitivity analysis based algorithm is took placed to find optimal solutions of upper level model. An application of the proposed model uses the modified Sioux-Falls network. The results show that the segment-based differentiated pricing strategy performs better than the existing uniform pricing strategy in reducing traffic congestion. This study can be applied as a demand management method to relieve disutility of excessively congested segments of expressways.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.764-769
• /
• 2006

Vibration test on MAST(multi axial simulation table) system has several advantage over one-axial vibration test that could simulate 6-DOF, 3-axial translation and 3-axial moment, at the same time. Since field vibration motion can be fully represented with 6-DOF, multi-axial vibration test on vehicle component is widely conducted in technical leading companies to make sure its fatigue performance in vibration environment. On the way to fulfill the process, editing technique of obtained field data is key issue to success a reliable vibration testing with MAST system. Since the original signals are not only too large to fulfill it directly, but all of the measured data is not guarantee its convergency on generating its driving files, editing technique of the original signals are highly required to make some events that should meet the equal fatigue damage on the target component In this paper, key technique on editing a field data feasible for MAST system is described based on energy method in vibration fatigue. To explain its technique explicitly, author first introduced a process on field data acquisition of two vehicle component and then, representing events are produced to keep up with the editing strategy about a energy method. In the final chapter, a time information regarding a vibration test on MAST system is derived from the energy data which is critical information to perform a vibration test.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.68-75
• /
• 2011

A vehicle fuel economy is very important issue in view of fuel cost and environmental regulation. It has been improved according to the performance improvement of the vehicle engine, power train and many components. It was evaluated at given mode (LA-4, FTP-75, etc) on an engine dynamometer or computer simulation program. In this paper, the fuel economy improvement cruise control algorithms as controling a vehicle velocity by road load calculated and predicted in a real expressway with gradient was studied. Firstly, the altitude and distance data which was measured with GPS sensor was already installed in the ECU of a vehicle. Then the vehicle equipped with GPS receiver is driven the same expressway. The ECU calculates the gradient angle and the in-/decreasing velocity using the gradient angle by comparing the current received distance and altitude data from GPS with the saved data ahead of the vehicle. Therefore the ECU can calculate and predict the vehicle velocity considering tolerance velocity of next position with running. Then the ECU controls the vehicle velocity to meet this predicted velocity in all section. Three cruise control algorithms with the different velocity profiles for the improvement of fuel economy are proposed and compared with the computer simulation results that the vehicle runs on Youngdong expressway. The proposed CVELCONT2 and CVELCONT3 algorithms were improved 3.7% and 4.8% of fuel economy compared with CONSTVEL which is steady cruising algorithm. These two algorithms are recommended as the Eco-cruise drive methodologies in this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1677-1684
• /
• 2010

Recently, due to the development of mobile phone and supply of smart phone, many contents have been developed. Especially, since the small-sized cameras are equiped in mobile devices, people are interested in the image based contents development, and it also becomes important part in their practical use. Among them, the character recognition system can be widely used in the applications such as blind people guidance systems, automatic robot navigation systems, automatic video retrieval and indexing systems, automatic text translation systems. Therefore, this paper proposes a system that is able to extract text area from the natural images captured by smart phone camera. The individual characters are recognized and result is output in voice. Text areas are extracted using Adaboost algorithm and individual characters are recognized using error back propagated neural network.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.3
• /
• pp.55-62
• /
• 2013

This paper aims to detect Speed Bump by using Omni-directional Camera and to suggest Real-time update scheme of Speed Bump through Vision Based Approach. In order to detect Speed Bump from sequence of camera images, noise should be removed as well as spot estimated as shape and pattern for speed bump should be detected first. Now that speed bump has a regular form of white and yellow area, we extracted speed bump on the road by applying erosion and dilation morphological operations and by using the HSV color model. By collecting huge panoramic images from the camera, we are able to detect the target object and to calculate the distance through GPS log data. Last but not least, we evaluated accuracy of obtained result and detection algorithm by implementing SLAMS (Simultaneous Localization and Mapping system).