• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.205-215
• /
• 2001

In this study, modeling and analysis procedure for the dynamic analysis of a high mobility tracked vehicle system were studied. The vehicle model used in this investigation is assumed to be consist of two kinematically decoupled subsystems. The chassis subsystem consists of chassis frame, sprocket, support rollers, road wheels, idler wheel, road wheel arms and idle wheel arm, while the track subsystem is represented as a closed kinematic chain consisting of track links and end connectors interconnected by revolute joints with bushing. Nonlinear contact force module describing the interaction between track link, and sprocket, idler wheel, road wheel, support roller, ground was used. The effects of road wheel arms and idler wheel arm due to tension adjuster are also considered.

• Journal of the Korean Society for Railway
• /
• v.8 no.6 s.31
• /
• pp.550-558
• /
• 2005

The track performance evaluation in curves of conventional line subjected to loading condition caused by tilting trains was carried out. And the correlations between train speed and track alignment was reviewed. The parameters of track alignment were determined by field investigation of all curves in conventional line. It was founded that the pressure of the rail did exceed the allowable stress when the tilting train speed was over 96km/hr in radius of 300m. As the radius of curvature is smaller, applied force on the track becomes larger in the curved track without regard to laying of the continuos welded rail. On the while, the change of applied force on the track corresponding to the change of the cant is not so large.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.4
• /
• pp.629-638
• /
• 1999

본 연구에서는 고속철도에서 차량·교량 구조물의 상호작용을 가능한 정밀하게 취급할 수 있는 3차원 해석모형을 개발하였다. 경부고속철도 교량형식인 PSC 박스거더 교량을 40m 단순 와 25-40-25m 3경간 연속 에 대해 뼈대요소를 사용하여 3차원으로 모형 하였으며, 궤도의 불규칙성은 정상확률과정으로 가정하고, 지수 스펙트럼 밀도함수를 사용하여 궤도의 형상을 생성시켰다. 열차는 경부고속철도 차량 하중효과가 가장 큰 동력차 만을 대상으로 17 자유도 모형과 38 자유도 모형으로 분리하여 개발하였다. 다양한 조건에 대한 분석결과를 검토하면 여러 가지 상황에서 38 자유도 모형의 필수 성이 보여지고 있다. 특히 교량의 솟음 및 장기 처짐에 의한 궤도형상변화가 있는 경우에는 반드시 38 자유도 모형이 적용되어야 하는 것으로 분석되었다. 또한 제동하중이 작용할 때 쏠림 효과에 의한 영향이 큰 것으로 평가되어, 제동에 의한 교량의 동적 거동은 종변 위에 대한 자유 도를 고려할 수 있는 주행차량모형으로 해석되어야 함이 규명되었다.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.12
• /
• pp.39-45
• /
• 2023

In this paper, a track irregularity according to adjacent deep excavation of railway was analyzed using three-dimensional numerical analysis. The construction for excavation adjacent to the railway track is likely to have a negative impact on train operations. Despite mandatory assessments of the stability and impact on adjacent structures during construction, reports continue to indicate ongoing settlement and track irregularity resulting from construction. Changes in the groundwater level and stress state of the ground due to excavation are pointed out as causes for settlement and track irregularity in structures adjacent to the excavation. In this study, therefore, numerical analysis was conducted taking into account factors that induce track irregularity during adjacent excavation work as variables. The KRL-2012 standard train load was applied to simulate operating trains. As a results, The position of the train load, the distance from the excavation point, had a significant impact on track irregularity, and there was a significant occurrence of track misalignment when the train load was applied. The impact of the groundwater level was not significant.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.2
• /
• pp.167-176
• /
• 2014

This paper proposes an optimum curve driving method for adeep-seabed mining robot(MineRo) in deep-sea soft ground. MineRo was designed as afour-row tracked vehicle. A study on the turning methods for the four-row tracked vehicle was conducted using three case by changing the velocity profile of each track. The configuration of the four-row tracked vehicle and soft ground equation are introduced, along with the dynamics analysis models of MineRo and soft ground, which were constructed using the commercial software DAFUL. Because the purpose of this study was to investigate a driving method on soft ground, the marine environment of the deep sea was not considered.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.4
• /
• pp.365-373
• /
• 2011

This paper presents the dynamic response and the vibration characteristics for a rail-track supported by discrete springs and dampers. Recently, automatic conveyer system, rail-track, rack-master system demand the soundproof facilities and vibration suppression measures in order to satisfy the strict environmental standards. The equations of motions of the dynamic characteristics for a vibration suppression rail-track under a traveling mass were derived by Galerkin's mode summation method considering gravity, centrifugal force, Coriolis force, inertia force of the moving mass, transverse inertia of the rail-track. Also, numerical results were calculated by Runge-Kutta integration method. In order to investigate vibration characteristics and dynamic responses, modal testing and measurement of the responses of the rail-track were performed. Through the experiment and numerical simulations, numerical results have a good agreement with experimental ones.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.4
• /
• pp.204-211
• /
• 2011

A dynamic analysis procedure is developed to provide a better estimation of the dynamic responses of bridge during the passage of high speed railway vehicles. Particularly, a three dimensional numerical model including the structural interaction between high speed vehicles, bridges and railway endures to analyse accurately and evaluate with in-depth parametric studies for dynamic responses of various bridge span lengths running KTX railway locomotive up to increasing maximum speed(450km/h). Three dimensional frame element is used to model the simply supported pre-stressed concrete (PSC) box bridges for four span lengths(40~25m). Track irregularity employed as a stationary random process from the given spectral density functions and irregularities of both sides of the track are assumed to have high correlation. The high-speed railway vehicle (KTX) is used as 38-degree of freedom system. Three displacements (Vertical, lateral, and longitudinal) as well as three rotational components (Pitching, rolling, and yawing) are considered in the 38-degree of freedom model. The dynamic amplification factors are evaluated by the developed procedure under various traveling conditions, such as track irregularity camber, train speed and ballast. The dynamic analysis such as Newmark-${\beta}$ and Runge-Kutta methods which are able to analyse considering the dynamic impact factors are compared and contrasted.

• 전기의세계
• /
• v.39 no.5
• /
• pp.68-75
• /
• 1990

급속한 경제발전과 이에 대응한 교통인구의 증가로 운송시스템의 속도 경쟁은 날로 심화되고 있다. 그러나, 기존의 차륜구동 시스템은 본질적으로 궤도와 차륜의 마찰에 의하여 추진력을 얻기 때문에 평균 최대속도 250Km/h(상한 최대속도 350Km/h)수준이며 소음, 진동 등의 많은 문제점이 있다. 이러한 단점을 극복하기 위하여 선진 외국에서는 부상식 열차의 개발에 관심을 표명하여 1960년대 후반부터 열차와 공기부상식 열차에 대한 연구를 병행하였다. 1970년대 중반까지 프랑스, 영국, 미국 등에서 개발이 진행된 공기 부상식 열차는 고속 주행 및 환경 문제 등에 문제점이 많아 실용화에는 이루지 못하고 신교통 시스템에 부분적으로 적용되고 있는 실정이다. 그러나 자기부상 열차는 Power Electronics 및 자기관련 기술의 급속한 발전에 힘입어 현재 실용화 단계에 이르고 있다. 특히 자기부상(Magnetic Levitation : Maglev) 시스템은 레일과의 마찰력에 의해 추진하는 방식이 아니기 때문에 본질적으로 고속성, 무공해, 안정성, 신뢰성, 경제성 그리고 승차감이 뛰어나다. Maglev는 레일 표면에서 자력을 이용해서 약 1.0cm 또는 10cm 가량 부상한 상태에서 주행하기 때문에 외부와의 물리적인 접촉이 필요 없어 마찰에 의한 소음, 공해, 마모 등이 없는 대단히 이상적인 미래의 운송 수단으로 각광을 받고 있다.

• Computational Structural Engineering
• /
• v.9 no.3
• /
• pp.54-59
• /
• 1996

시속 300km로 주행하는 고속철도 열차의 주행안정성 및 승차감을 확보하기 위해서는 열차하중을 고려한 정교한 정적, 동적해석 및 설계가 이루어져야 한다. 따라서 차량과 궤도의 동적상호작용 및 차량과 교량의 동적상호작용, 터널의 미기압 및 공기압, 대단면 터널굴착의 안정성평가, 열차주행에 의한 지반진동의 예측 등에 전산수치해석기법의 활용 및 개발이 현재 활발히 이루어지고 있다. 그러나 고속철도 보유국을 포함한 선진국들에 비하면은 이러한 전산수치해석분야에 있어서 아직도 더 많은 연구 및 개발이 본 공단을 포함하여 학계 및 연구소에서 이루어져야 하겠으며, 본 경부고속철도 건설사업으로 인하여 차량, 전기시설분야의 각종 첨단기술개발 및 발전과 더불어 하부 토목구조물의 건설 및 설계 해석분야에 많은 발전이 기대된다 하겠다.

• Journal of the Korean Society for Railway
• /
• v.18 no.5
• /
• pp.447-456
• /
• 2015

Continuous as well as discrete measurement of the track geometry based on a track trolley are investigated to enhance the efficiency of the trolley and to minimize the measurement errors. A new kinematic model based on the track coordinates involving transition and circular curves is developed to improve the accuracy of the measurement; a nonlinear Extended Kalman Filter (EKF) is employed to linearize the governing equations. The proposed model is verified with the ideal track geometry in terms of both discrete and continuous measurement. Comparison with the previous models is also made to prove the applicability of the kinematic model.