• Title/Summary/Keyword: 주파수 편이

Search Result 194, Processing Time 0.037 seconds

Parametric Sensitivity Analysis Using Fourier Transformation (푸리에 변환을 이용한 파라미터 민감도 해석)

  • Baek, Moon-Yeal;Lee, Kyo-Seung
    • Journal of Power System Engineering
    • /
    • v.9 no.4
    • /
    • pp.58-64
    • /
    • 2005
  • 주파수 영역 민감도 해석법은 동적 시스템의 전달함수에 대한 설계 파라미터의 변화에 의한 효과를 파악하기 위해 사용되어 왔으며, 이때의 민감도 함수는 시스템 설계 파라미터에 대한 시스템 전달 함수의 편미분 값이다. 일반적으로 종래의 주파수 영역 민감도 해석은 직접 미분법이나 라플라스 변환이 사용되어 왔다. 라플라스 변환을 사용하는 경우에 시스템의 차수가 증가할수록 역행렬 조작은 매우 많은 시간을 필요로 하며 또한 어려운 작업이다. 본논문에서는 이러한 다점을 보완하기 위하여 푸리에변환을 이용한 민감도 기법을 제시하였다. 파라미터의 변화에 대한 진폭-주파수 특성의 민감도 해석을 간단한 2자유도 모델과 로터 다이나믹 시스템에 적용하였다.

  • PDF

Design and Performance Evaluation of Signal Processing for OFDM Underwater Acoustic Communications (OFDM 수중음향통신 신호처리 설계와 성능평가)

  • Kim Byung-Chul;Lu I-Tai
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • autumn
    • /
    • pp.487-490
    • /
    • 2004
  • OFDM(Orthogonal Frequency Division Multiplexing) 방식의 수중음향 데이터 통신시스템에서 도플러 편이(Doppler Shift)와 도플러 확산(Doppler Spread)의 영향을 완화하여 주파수 효율을 향상시킬 수 있는 수신신호처리 방안을 설계하고 해상에서 송수신 된 시험 데이터의 BER 로써 성능을 평가한다. 도플러 편이를 OFDM 심볼에 부가된 Cyclic Prefix 와 상관계수법을 통해 추정하였으며 도플러 확산에 의해 시간에 따라 변화하는 채널을 Time-Frequency 축상에서 $2\times1D$ MMSE 방식으로 추정한다. 해상실험 결과, $8kHz\~11kHz$ 의 전송대역을 사용 할 때 복호 전 전송률 3098bps, 송수신 소자간 거리 7km, SNR 15dB에서 약 $1\~3\%$의 BER이 추정된다.

  • PDF

Characteristics of Metal Sensor using Variable Frequency (가변주파수형 금속감지 센서의 특성)

  • Choi, Kyoo-Nam
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.9 no.2
    • /
    • pp.161-166
    • /
    • 2014
  • This Electromagnetic metal piece detection sensor, having high sensitivity even under high humidity and dust density, using LVDT was investigated. Metal detection characteristics using phase detection method, for 3 frequencies covering ELF and LF band, were experimentally measured. It was found that the sensitivity for metal and animal food, in which metal piece was included, was exponentially increased as frequency increased. Reducing cutoff frequency of LPF after PD was found to be effective to proportionally increase sensitivity. Also the sensitivity of metal piece detection was enhanced by optimizing BPF bandwidth and SNR. Metal piece detection limit using available ferrous test samples was found to be 0.7mm diameter from the experiment using 50kHz, in ELF band, which was known to have better selectivity to animal food. is an example of ABSTRACT format.

Implementation of the Wavelength-Swept-Source and Signal Processing for the Frequency Domain Optical Coherence Tomography (주파수영역 광 간섭 단층촬영 시스템을 위한 파장가변 광원 및 신호처리계의 구현)

  • Lee, Eung-Je;Kim, Yong-Pyung
    • Korean Journal of Optics and Photonics
    • /
    • v.18 no.5
    • /
    • pp.309-316
    • /
    • 2007
  • We demonstrate the wavelength swept source and signal processing for the frequency domain optical coherence tomography. The laser output performance is improved by using a semiconductor optical amplifier with a booster amplifier. The laser generates 14 mW of average power of which wavelength shift in the lasing spectral shape is compensated. Adopting a Fabry-Perot etalon and digital signal processing, the broadening of the beat frequency due to the variance of wavelength-sweep-velocity is calibrated. The optical coherence tomography system shows 154.4 kHz of axial scanning speed, 0.95mm of depth range, and $12{\pm}0.37{\mu}m$ of axial resolution.

Improved Equalization Technique of OFDM Systems Using Block Type Pilot Arrangement (Block Type 파일럿 배치를 적용한 OFDM 시스템의 등화 기법 개선)

  • Kim Whan-Woo;Kim Ji-Heon
    • The Journal of the Acoustical Society of Korea
    • /
    • v.25 no.3
    • /
    • pp.113-120
    • /
    • 2006
  • This paper is concerned with a equalization technique for Orthogonal Frequency Division Multiplexing (OFDM) systems based on a block type pilot arrangement over slow fading channels. The bit rates obtained in underwater channels are relatively modest compared to some other communication channels such as cellular phones or indoor wireless systems. Consequently. the Doppler effect is the important parameter in tracking a channel. In case of a coherent demodulation scheme, the residual mean phase errors due to Doppler frequency may be fatal for the performance of the system. The equalizer could not solely handle mean Doppler shift. To account for the common Doppler effect a phase error tracking loop is used with the frequency equalizer. so that the rotation errors are avoided. Furthermore. simulations show that we can reduce the computational load of the tracking loop with negligible effect on performance.

Modeling and Vibration Control of ERF-Based Intelligent Structures via Sandwich Beam Theory (샌드위치 보 이론을 이용한 ERF 지능구조물의 모델링 및 진동제어)

  • Park, Y.K.;Choi, S.B.;Cheong, C.C.
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.13 no.2
    • /
    • pp.110-122
    • /
    • 1996
  • 본 논문에서는 전기유동유체(Electro-Rheological Fluid : ERF)를 함유하는 지능구조물의 동적 모델링 및 진동제어를 수행하였다. 먼저 실리콘 오일을 기본용매로 하여 조성된 ERF의 복소 전단모듈러스를 전장부하와 가진 주파수의 함수로 동적 회전모드 실험을 통하여 도출한 후, 이를 샌드위치 보 이론과 연계하여 동적 모델링을 실시하였다. 도출된 6차 편미분방정식 형태의 지배 방정식을 유한요소 모델로 이산화하여 전장부하에 따른 지능구조물의 동탄성 특성값인 감쇠 고유 주파수 및 모달 손실계수를 주파수 영역에서 얻었다. 그리고 ERF를 함유한 샌드위치 형태의 지능구조물을 제작한 후 실험적으로 얻은 동탄성 특성값과 모델에 의해 예측된 동탄성 특성값을 비교 고찰하여 제시된 동적 모델에 대한 타당성을 입증하였다. 또한 모델을 통해 전장부하 함수로 예측된 주파수 응답곡선 중에서 각 주파수 대역에 대해 최소 변위가 되는 응답곡선을 요구응답으로 설정한 후, 그에 해당하는 전장부하를 선정하는 논리적인 능동 진동제어 알고리즘을 제안하였다. 제어알고리즘의 유용성을 입증하기 위해 실험적으로 수행된 능동 진동제어 결과를 주파수영역과 시간영역에서 제시하였다.

  • PDF

위성 WiBro 신호전송 및 보상기법

  • Lee, Byeong-Seop
    • TTA Journal
    • /
    • s.109
    • /
    • pp.56-63
    • /
    • 2007
  • 위성을 이용하여 초고속 이동체를 대상으로 한 WiBro 서비스를 제공하는데 있어서 OFDM(Orthogonal Frequency Division Multiplexing) 신호의 특징인 과대한PAR(Peak To Average Power Ratio)로 인한 위성중계기에서의 비선형 간섭신호 분석과 이를 극복할 수 있는 변조방식에 대하여 논하고 아울러 시속 300Km가 넘는 초고속 이동체에서 OFDM 신호를 송, 수신하는 경우 Doppler 주파수 편이에 따른 WiBro 수신성능 열화를 분석하고 이를 효과적으로 극복할 수 있는 새로운 방법을 제안한다.

  • PDF

Instantaneous Frequency Estimation of AM-FM Signals using the Inflection Point Detection (변곡점 검출을 이용한 AM-FM 신호의 순간주파수 추정)

  • Iem, Byeong-Gwan
    • Journal of IKEEE
    • /
    • v.24 no.4
    • /
    • pp.1081-1085
    • /
    • 2020
  • Instantaneous frequencies (IF) of the AM-FM signal is estimated based on the inflection point detection (IPD) method. Local maxima/minima are detected using the IPD, and they are exploited to find the IF of AM and FM components, respectively. The envelope of the maxima/minima is obtained to estimate the IF of the AM part. And the distance between neighboring maxima (or minima) is used to estimate the IF of the FM component. Computer simulation shows that the proposed method properly estimates the IF of the AM and FM when the signal has fixed frequencies for both parts. In the case of the time-varying IF of the FM part, the estimated IF shows some deviation from the true IF due to the rough sampling effect of the maximum/minimum points. Thus, the post-processing such as the lowpass filtering of the estimated IF is required to refine the resulting IF estimation.

Construction of Ultrasound Pulsed Doppler Velocimeter (펄스 초음파 도플러 속도계의 제작에 관한 연구)

  • 현석봉;김수용;이재수
    • Progress in Medical Physics
    • /
    • v.5 no.1
    • /
    • pp.25-39
    • /
    • 1994
  • To measure the velocity of heart wall and local flow transctaneously in blood vessels, we have developed a single channel 3.1 MHz pulsed ultrasonic Doppler velocity meter. Ultrasound pluse width and repetition frequency (PRF) used in the velocity meter is 1 ${\mu}$sec 6kHz reapectively, and the Doppler shift of the backscattered echo signal is sensed in a phase detector by coherent demodulation method. From the output of the phase detector, the Doppler signal corresponding to the mean velocity of acoustic wave scatterers over a small region is obtained by using a range gate, sample holder and band-pass filter. Mean frequency of Doppler signal is estimated by zero-crossing counter and the instantaneous velocity of scatters is displayed as a function of time. It is possible to estimate velocity profile, volume flow and flow acceleration of vessels in man if the number of channels and range resolution in increased.

  • PDF

Defect Signal Analysis of Steam Generator Tube in NPP Using ECT Array Probe (ECT Array Probe를 이용한 원전 SG세관의 결함 신호해석)

  • Lim, Geon-Gyu;Kim, Ji-Ho;Lee, Hyang-Beom
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.772-773
    • /
    • 2008
  • 본 논문에서는 ECT Array Probe를 이용한 원자력 발전소의 SG세관의 결함 신호를 해석하였다. 프로브의 전자기적 특성을 해석하기 위하여 맥스웰 방정식을 이용하여 지배방정식을 유도하였고, 3차원 유한요소법을 이용하여 전자기 수치 해석을 수행하였다. 신호해석을 위해 사용된 결함의 종류는 FBH결함이며, 결함의 깊이는 세관 두께의 40[%] 및 100[%]로 하였다. 시험주파수는 300[kHz], 400[kHz]를 사용하였으며, 각각의 시험주파수에 대한 결과를 비교 분석하였다. 해석결과 결함부위에서 신호의 증가를 확인할 수 있었으며, 주파수 시험변화시 300[kHz]보다 400[kHz]일때 결함 신호가 증가하는 것을 확인할 수 있었다. 또한 획득한 신호를 ASME 표준 시험편을 이용한 ECT Array Probe의 와전류탐상 실험신호와 비교하였다. 본 논문의 결과는 ECT Array Probe를 이용하여 원전 SG세관 검사시 결함신호해석에 도움이 될 것으로 사료된다.

  • PDF