• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.3
• /
• pp.16-21
• /
• 2012

Global navigation satellite systems (GNSS) use dual frequency signals to remove ionosphere delay effect. GNSS receivers have their own biases, called inter-frequency bias (IFB) between dual frequencies due to differential signal delays in receiving each frequency codes. The IFB degrades pseudo-range and ionosphere delay accuracies, and they must be accurately estimated. Simultaneous estimation of ionosphere map and IFB is applied in order to analyze the IFB estimation accuracy and variability. GPS network data in Korea is used to compute each receiver's IFB. Accuracy changes due to ionosphere model changes is analyzed and the effect of external GNSS satellite IFB on the receiver IFB is analyzed.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.172-173
• /
• 2011

전력시스템 주파수는 주파수 계전기용도 이외에 전력시스템에 대용량 집중전원 및 소규모 분산전원이 연계될 때 동기 검정 계전기와 발전기 및 소내 변압기의 과여자 상태를 감지하는 V/F 계전기에서도 사용된다. 주파수 계측장치는 주파수 및 주파수 편이를 실시간으로 정확하고 신속하게 측정함으로서 정규 주파수를 유지시키고 더 나아가 사고파급방지에 대한 책무를 수행해야 한다. DFT필터는 광범위하게 사용되었으나 주파수가 편이하게 되면 오차가 발생된다. 근래 웨이브릿 변환이 새로운 주목을 받고 것은 지속적인 연구 결과, 단일 반복 방정식 형태로 연산 부담이 적어 실시간 신호 처리에 적당한 고속 반복 이산 웨이브릿 변환이 제시되었기 때문으로 생각된다. 본 논문에서는 FRDWT에 의한 주파수 추정 기법을 제시하고자 한다. 제시된 기법의 성능 평가는 발전기 내부사고와 외부사고 데이터에 의해 이루어졌다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.89_90
• /
• 2009

근래 주파수 편이를 모니터링 함으로서 광역정전 예방을 도모하려는 GPS 기반 FNET에 대한 연구가 시도되고 있다. 본 연구에서는 PMUs와 FNET에 대하여 살펴본 후, FNET에 적용 가능한 주파수 추정 알고리즘을 비교하였다.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.16-21
• /
• 2001

Improvement of sound absorption capability of wood and wood-based board by resonant absorption was attempted. Sound absorption coefficients of wood and wood-based board which contain normal, simple perforation and stair type perforation had been estimated by the tube method using standing wave ratio. Sound absorption coefficients of wood specimens of simply perforated and perforated with stair were higher than that of normal specimens. Especially, in case of stair type perforation, it was about 50 to 60% higher than that of normal specimen in the frequency of 3 to 4KHz. It was considered that the cavity which had been formed by perforation with stair type behaved as a single resonator. Wood-based board showed good sound absorption coefficients in the frequency from 125Hz to 2KHz and that of perforated board showed a little higher in the frequency from 300Hz to 500Hz than that of normal board. The computed data of resonant frequencies at several sizes of cavity showed good accordance with the estimated data of those.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.118-124
• /
• 2003

응축기, 증발기, 전열관에 사용되는 Fin Tube는 열전달효율 향상을 위하여 Fin의 높이 를 증가시키고, Tube의 최소두께를 얇게 가공하는 경향으로 발전하고 있다. 따라서, Fin Tube의 와전류탐상(ECT; Eddy Current Testing)에 의한 결함검출에 더욱 어려움이 예상된다. 본 연구에서는 Fin Tube의 Fin 높이를 3단계로 변화시켜 Tube를 제작하고, Tube에 축 방향결함, 원주방향결함, 원형결함을 각각 Fin Tube의 안쪽에 최소두께의 20%, 40%, 60% 의 동일결함율을 갖는 인공결함 시험편을 제작하였다. 제작한 원형결함시험편에 와전류탐상을 수행하여 Fin 높이에 따른 최적주파수의 변화를 연구하였다. Fin높이가 다른 원형결함 시험편에 1~20KHz 주파수를 적용한 결과 최적주파수는 12KHz로 Fin높이에 크게 영향을 받지 않음을 밝혔다 또한 Fin높이에 따른 최적주파수변화는 크지 않으나 Fin 높이가 높을수록 100%관통결함의 위상각(40')에 근접하여 나타났다. 축방향결함, 원주방향결함, 원형결함을 갖는 시험편에 와전류탐상을 수행한 결과 원형결함을 갖는 시험편의 신호 감도가 축방향결함, 원주방향결함보다 좋게 나타났다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.203-206
• /
• 2008

기존의 대표적인 디지털 통신방식으로 주파수 편이 변조(FSK: frequency shift keying), 위상 편이 변조(PSK: phase shift keying), 진폭 편이 변조(ASK: amplitude shift keying) 방식들이 있다. 본 논문에서는 2진 정합필터를 이용하여 웨이브릿 편이변조 신호를 복원하는 알고리즘을 제안한다. 웨이브릿 편이 변조 시스템은 스케일링 함수(scaling function)와 웨이브릿(wavelet)을 이용한다. 스케일링 함수를 1로, 웨이브릿 함수를 0으로 할당하여 2진 데이터를 변조한다. 기존의 웨이브릿 편이 변조 시스템에서는 복원을 위해 후처리가 필요하였다. 된 논문에서는 2진정합필터를 이용하여 복원하므로, 별도의 후처리 과정 없이 복원을 가능하게 하였다. 모의실험 결과 제안한 알고리즘이 타당함을 확인하였다.

• The KIPS Transactions:PartC
• /
• v.19C no.4
• /
• pp.239-246
• /
• 2012

The function of location estimation in WPAN has been studied and specified on the ultra wide band optionally. But the devices based on CSS(Chirp Spread Spectrum) specification has been used widely in the market because of its functionality, cheapness and support of development. As the CSS device uses 2.4GHz for a carrier frequency and the sampling frequency is lower than that of the UWB, the resolution of a timestamp is very coarse. Then actually the error of a measured distance is very large about 30cm~1m at 10 m depart. And the location error in ($10m{\times}10m$) environment is known as about 1m~2m. So for some applications which require more accurate location information, it is very natural and important to develop a sophisticated post processing algorithm after distance measurements. In this paper, we have studied extended Kalman filter with the frequency offsets of anchor nodes, and proposed a novel algorithm frequency offset compensated extended Kalman filter. The frequency offsets are composed with a variable as a common frequency offset and constants as individual frequency offsets. The proposed algorithm shows that the accurate location estimation, less than 10cm distance error, with CSS WPAN nodes is possible practically.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.13 no.3
• /
• pp.14-23
• /
• 1993

A method to measure the resonance frequency of the ultrasonic transducer which is adhered to the specimen by the ultrasonic visualization is tried. The result shows that the resonance frequency of the transducer adhered to the specimen is lower than the nominal resonance frequency of the transducer in itself and the greater the degree of deviation. It is verified that its cause is the resonance of Al-plate for protecting the transducer by the theoretical analysis.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.4
• /
• pp.255-261
• /
• 2014

This paper presents an underwater acoustic communication with nonlinear chirp modulation. The information is carried by the carrier amplitude, frequency or phase in the most common underwater acoustic communications. However, the proposed method includes the information within frequency variation of carrier wave for a symbol. Especially, as carrier wave the hyperbolic frequency modulated signal, one of the nonlinear chirp signal, is used and it is robust in the Doppler channel. The proposed method was analyzed and compared to conventional method by simulation. When the doppler shift existed, the error probability of the proposed method is reduced by 5~12 % than conventional method with linear frequency modulated signal. Sea trial was performed to analyze the performance of the proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8B
• /
• pp.1012-1020
• /
• 2011

In this paper a design of $\pi$/4-DQPSK baseband receiver for the exchange of digital data and e-mail between shore and ship stations and/or among ship stations in the maritime mobile service VHF channels is described. Due to the permitted relatively big frequency instability of local oscillators at the transmitter and the receiver of maritime communication system, the designed baseband receiver should have the capabilities of correct estimation and compensation of the synchronization parameters, such as symbol timing and frequency offset, from the received signal which might include relatively big frequency error. Simulated BER results show that the designed baseband receiver works less than 0.5dB loss under AWGN channel when the normalized frequency offset of the received signal is more then 20%.