• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.12B
• /
• pp.2141-2153
• /
• 2000

본 논문에서는 DMT 기반의 xDSL 시스템의 수신단에서 발생하는 샘플링 위상 옵셋과 샘플링 주파수 옵셋에 의한 타이밍 오류를 분석한 후, 디지털 수신기에서 이를 보상하기 위한 비동기식 샘플링(full digital PLL) 방식을 제안한다. 기존의 논문에서는 DMT 방식의 xDSL 시스템에서 샘플링 위상 옵셋을 delay-rotor 특성을 이용한 주파수영역 위상 회전기로 보상하는 비동기식 샘플링 방식을 제안한 바 있다. 그러나 수신단에서 샘플링 시 존재하는 타이밍 오류로 인해 저역통과 필터링된 수신신호는 더 이상 delay-rotor 특성이 성립하지 않아 성능이 크게 저하된다. 본 논문에서는 샘플링 위상 옵셋을 완벽하게 보상할 수 있는 데이터 구간의 환형 컨벌루션화(circular convolution) 방식을 제안한다. 또한 샘플링 위상 옵셋과 샘플링 주파수 옵셋이 동시에 존재하는 경우 이를 보상할 수 있는 개선된 시간/주파수 혼성영역 보상방식을 제안한다. 또한 추가의 오버헤드를 사용하지 않고 샘플링 위상 옵셋과 샘플링 주파수 옵셋을 보상할 수 있는 시간영역 보상방식을 제안한다. 마지막으로 DMT 방식의 ADSL 시스템에 본 논문에서 제안된 비동기식 샘플링 방식들을 적용하여 모의실험을 통해 성능을 분석하고 기존의 방식과 비교하여 성능의 우수성을 확인한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2008.11a
• /
• pp.99-102
• /
• 2008

OFDM 시스템에서는 수신단의 샘플링 주파수가 정확하지 않을 경우 샘플링 주파수 옵셋으로 인한 ICI(Inter-Carrier Interference) 현상이 발생하여 수신 성능의 열화를 초래한다. 일반적으로 샘플링 주파수 옵셋의 추정은 연속된 2개의 OFDM 심볼의 파일럿 신호 또는 약속된 신호간의 상관을 통하여 수행된다. 본 논문에서는 주파수 영역에서 연속된 심볼들 간의 다양한 조합을 이용하여 샘플링 주파수 옵셋을 추정하고 그 성능을 비교한다. 이를 위해 각 방식을 DVB-T 시스템에 적용하여 모의실험을 수행한 결과와 기존 기법과의 성능을 비교 분석하였으며, 그 결과 AWGN 채널 환경에서 샘플링 주파수 옵셋 추정 성능을 향상시킬 수 있음을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1795-1805
• /
• 1999

In an OFDM (Orthogonal Frequency-Division Multiplexing) system, the sampling frequency offset between the transmitter and receiver is known to cause the interchannel interference (ICI), resulting in performance degradation. In this paper, we propose two time-domain techniques to estimate the sampling frequency offset, especially for a high data-rate OFDM system. The first technique estimates the sampling frequency offset by using the phase difference between two received samples with a fixed amount of time interval, corresponding to the transmitted training symbol, under the assumption of perfect symbol and carrier offset synchronization. The second technique estimates the sampling frequency offset and carrier frequency offset jointly, when the two offsets exist together, by using two training symbols with different frequency components and using a sample algebraic calculation. The proposed estimation techniques for sampling frequency offset cause no time delay due to all time-domain processing, and have a good performance due to no ICI effect. The performances of the proposed techniques are demonstrated by various simulations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.343-345
• /
• 2015

Currently, SAW Device has been used as a frequency filter using the property of passing only a desired frequency with a narrow bandwidth. However, the areas of activity in various fields since the permanent advantages can be widened by using a non-powered. These sensor tags using SAW Device has been done, but a lot of research, the development of the state still insufficient for Reader Platform. How to read the value of the ID Tag Using SAW Device has a time domain sampling (TDS) method and a frequency domain sampling (FDS) method. The purpose of the paper, we use the FDS method that requires high-speed processing with a relatively slow sampling rate does not require high-speed sampling. Reader Platform was the way to detect ID through PC as FDS way, but It is based on the Cortex-A9 processor and it works a low price, compact and real-time Reader Platform.

• Journal of Broadcast Engineering
• /
• v.14 no.3
• /
• pp.357-365
• /
• 2009

In an OFDM system, the sampling frequency offset between the transmitter and receiver is known to cause the inter-channel interference (ICI), resulting in performance degradation. Sampling frequency offset can be generally estimated by correlation of the pilot signal within contiguous OFDM symbol. In this paper, we propose sampling frequency offset estimation schemes using various mixture of consecutive symbols. We conduct a simulation in DVB-T(2K mode) system, which shows that the proposed schemes can improve the performance of sampling frequency offset estimation by decreasing noise effect within consecutive symbols in AWGN channel model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.218-224
• /
• 2013

Generally, SAW device, which uses Time Domain Sampling, requires high speed A/D converter because SAW device using TDS needs high sampling speed as much as its high data speed. However, the high price of A/D converter discourages makers from using it. On the other hand, SAW device, which uses Frequency Domain Sampling, does not required high speed A/D converter because SAW device using FDS does not need high sampling speed. It is very efficient in price comparison to its performance because high processing speed of SAW device using FDS can be implemented using low price Embedded Systems. The purpose of the paper is to solve the issues above by designing and realizing SAW device(FDS) using SAW sensor for TDS.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.1
• /
• pp.54-60
• /
• 2004

In order to mitigate the problems in storage space and network bandwidth for the full CD quality audio, current digital audio is always restricted by sampling rate and bandwidth. This restriction normally results in low sample rate audio or calls for the data compression scheme such as MP3. However, they can only reproduce a lower frequency range than a regular CD quality because of the Nyquist sampling theory. Consequently they lose rich spatial information embedded in high frequency. The propose of this paper is to propose efficient high frequency enhancement of low sample rate audio using n adaptive filtering and DWT analysis and synthesis. The proposed algorithm uses the LMS adaptive algorithm to estimate the missing high frequency contents in DWT domain and it then reconstructs the spectrally enhanced audio by using the DWT synthesis procedure. Several experiments with real speech and audio are performed and compared with other algorithm. From the experimental results of spectrogram and sonic test, we confirm that the proposed algorithm outperforms the other algorithm and reasonably works well for the most of audio cases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1004-1011
• /
• 2005

In OFDM (Orthogonal Frequency Division Multiplexing) system, sampling frequency offset causes performance degradation due to increase of ICI. Sampling frequency offset can be generally estimated by correlation of the pilot signal or the known pattern within two contiguous OFDM symbol however, this method has the throughput degradation and the difficulty in applying to various OFDM systems. In this paper, we propose a new algorithm for sampling frequency offset estimation which can solve aforementioned issues. The proposed algorithm uses a single OFDM symbol to prevent throughput degradation and to apply to various OFDM-based communication systems flexibly Also, the proposed algorithm can enhance reliability by observing more number of correlations compared to the established algorithm in frequency domain. Extensive computer simulation shows that the proposed algorithm can improve the system performance in various channel conditions.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.149-152
• /
• 2004

본 연구에서는 Split-beam 변환기에 적용 가능한 방향 탐지 알고리듬으로써 4분 샘플링에 의한 시간 영역에서의 음원 도래 방향 탐지법을 검토하고자 한다. 외부 잡음을 고려한 환경하에서도 완전 샘플링 및 4분 샘플링 후 주파수 영역에서의 시간 지연 계산법보다 4분 샘플링에 의한 시간 영역에서의 상호상관 기법이 경제적인 측면과 분해능의 측면에서 적절하다는 것을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1249-1256
• /
• 2006

This paper proposes, based on a bandpass sampling theory, a novel method to find valid sampling frequency range and minimum sampling rate with low computational complexity for downconversion of multiple bandpass radio frequency (RF) signals. Guard-bands or spacing between adjacent downconverted signal spectrums are also taken into consideration in determining sampling frequency for practical implementation. Moreover, we verify through comparison with other method that the proposed method has more advantageous properties.