• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.190-191
• /
• 2001

단주기 격자를 이용한 광섬유 레이저는 차세대 대용량 파장분할 통신과 광 CATV 방송망에 대한 DFB 반도체 레이저의 대체 광원으로 많은 연구가 진행되고 있다. 좁은 파장영역에 대한 선택적 반사특성을 가지는 광섬유 단주기 격자의 특성을 이용하면 간단한 구조의 고출력을 가지면서 낮은 잡음의 수백 kHz대의 짧은 주파수 폭을 가지는 광섬유 레이저를 얻을 수 있다. 또한 반도체 DFB 레이저에서는 구현하기 어려운 정밀한 파장 선택성을 가지는 광섬유 레이저를 구현할 수 있다. (중략)

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.3
• /
• pp.184-190
• /
• 2014

Although it is ideal that the sound with the range of 20 ~ 20,000 Hz is produced by the loudspeaker system composing of only one loudspeaker unit, it is almost impossible now. Therefore, the audible frequency range is now produced by the loudspeaker system, which is consisted of more than two loudspeaker units. The multi-way loudspeaker system certainly requires a crossover filter, which is divided the audible frequency into low and high frequency ranges. The crossover frequency of filter usually is in the range of 1 ~ 4 kHz, the frequency range can largely affect to the sound articulation and quality. It is an example that the phase and amplitude at the crossover frequency can be different from each other, due to the variously reasons. Conversely, they can not produce the smooth frequency response due to the different distance between the two loudspeaker units and electrical properties. As a result, the sound articulation and quality can be degraded. Therefore, the phase and amplitude response at the crossover frequency has to be deeply considered, in order to exactly match the woofer and tweeter. In this study, it is proposed the methods which are the flat frequency and phase response to be obtained by adjusting of the delay time between loudspeaker units, and the choice of filter to be considered the roll-off properties of each unit. It is achieved the frequency response with ${\pm}1$ dB, and the sound articulation is also improved.

• Broadcasting and Media Magazine
• /
• v.12 no.3
• /
• pp.14-36
• /
• 2007

다양한 무선 통신 서비스의 등장으로 주파수 자원의 수요가 급증하여 스펙트럼 이용 효율을 극대화하기 위한 새로운 기술 개발의 필요성이 대두되고 있으며, 이에 대한 기술로 Cognitive Radio (CR) 기술이 주목받고 있다. CR 기술은 선택된 주파수 대역에 최적의 QoS를 제공하기 위해서는 먼저 주파수 환경에 적응성을 갖는 스펙트럼 센싱 (Spectrum Sensing) 기술이 필요하며, CR 기술이 적용된 무선 브로드밴드 네트워크 (AWBN : Adaptive Wireless Broadband Network) 모듈은 최근 각광받고 있는 방통융합 솔루션의 Hot Issue인 QoS 보장 홈네트워크 기반의 멀티미디어 전송(TV Portal Service)용 네트워크에 최적화된 솔루션으로 활용될 것으로 기대하고 있을 뿐만 아니라, IEEE 802.22 그룹에서 연구되고 있는 비어있는 TV 대역 및 마이크로폰 대역에 활용될 뿐만 아니라, 기존의 Mobile WiMax에 의한 브로드밴드 네트워크에도 활용 가능하다. 본 고에서는 IEEE 802.22/16d 시스템 규격에 의해 개발된 AWBN 시스템 개발 내용을 기술한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7B
• /
• pp.632-641
• /
• 2006

Recently FCC has considered about the unlicensed device operation in licensed bands. However, this operation can give the harmful interference to the existent licensed system while unlicensed devices operate. Therefore, there should be strict requirements to protect licensed system. So in this paper we propose dynamic frequency selection method in the MAC layer, which is based on the cognitive radio technology. The proposed dynamic frequency selection method creates channel lists after sensing the licensed channels. And it helps the CR base station immediately to moves the current channels that are used by the unlicensed system to other available bands dynamically when a licensed system's signal is detected. This method can reduce interference that is caused by unlicensed devices. In addition, it can maximize channel utilization with enabling coexistence of unlicensed system and licensed system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.3
• /
• pp.249-257
• /
• 2013

Recently, data traffic is significantly increased by high rate data service. As a result, radio spectrum is considered one of the most scarce and valuable resources for wireless communications. For the solution of this problem, cognitive radio(CR) has been proposed as an efficient means to opportunistic spectrum sharing between primary (licensed) users and cognitive radio users. In this paper, user selection scheme in CR networks is proposed for additional consideration of secondary system. The proposed user selection scheme mitigates interference to primary user by using orthogonal channel vectors while improves performance of secondary system. Simulation results show that the proposed scheme achieves 1.62bps/Hz higher average throughput of whole system than one of the existing scheme.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.3
• /
• pp.380-387
• /
• 2010

For the fault diagnosis of three-phase induction motors, we propose a diagnosis algorithm based on mutual information and linear discriminant analysis (LDA). The experimental unit consists of machinery module for induction motor drive and data acquisition module to obtain the fault signal. As the first step for diagnosis procedure, DFT is performed to transform the acquired current signal into frequency domain. And then, frequency components are selected according to discriminate order calculated by mutual information As the next step, feature extraction is performed by LDA, and then diagnosis is evaluated by k-NN classifier. The results to verify the usability of the proposed algorithm showed better performance than various conventional methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.4
• /
• pp.261-269
• /
• 2019

This study investigates a method of designing pixel-type frequency selective surfaces(FSS) with flexibility while considering factors, such as polarization and incident angle. Among the various methods used to solve the discrete space problem when designing a pixel-type FSS, the binary particle swarm optimization(BPSO) algorithm is one of the most applicable techniques to determine the periodic structure pattern of an FSS. Therefore, a method of efficiently designing FSS with roll-off band pass characteristics using an improved BPSO algorithm is proposed. To solve the convergence problem in the fitness function design to induce particles in the desired solution, FSS with desired roll-off wave characteristics can be easily obtained by applying a fitness function using "slope" as an input parameter.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.1
• /
• pp.70-75
• /
• 2022

The critical bandwidth represents response interactions with respect to a signal tone and their neighboring bands. This study was to analyze the critical bandwidths of a clinically important 500 Hz tone in Korean young male and female subjects (male = 10, female = 10) at a conversational level (60 dB HL). Data were measured with notched band noise and two alternative forced choice methods. Results showed that the critical bandwidth was slightly greater (95 Hz) than the previous Western measures. There were no statistically significant differences in gender, nor were there any significant differences in lateralization of the ear (p > 0.05). These results may have implications in optimizing effective tinnitus masking or the related clinical applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2696-2705
• /
• 1997

An exact experssion for the average symbol error rate(SER) of L-order selection diversity for MPSK signals in a frequency-nonselective slowy m-distributed Nakagami fading and additive white Gaussian noise(AWGN) is determs of finite sums is obtained. To derive the SER of MPSK signals with selection combining, the new expression of pdf is introduced and many other mathmatical methods are used. When fading index m is 1, the derived exppression lead to those of MPSK with selection combining in Rayleight fading channels. The results show that the error probability decreases as the order of diversity increases.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.556-562
• /
• 2013

This paper is aimed to improve performance of Band-Selection speech/audio Coder reconstucted band spectrum that is not sent by the comfort noise. To improve the performance, we use the Spectral Band Replication(SBR) technique instead of substitution of Comfort noise. To synthesize SBR signal, the SBR algorithm is referenced in selected signals and the spectrum synthesized by SBR is injected to non-selected band. Each sub-band spectrum has been energy-weighted by real audio signal. We propose the enhanced the Band-Selection Coder that utilizes synthesized SBR signal from selected signal instead of comfort noise.