• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.615-624
• /
• 2016

In this study, two rectangular barges in close proximity were simulated to analyze the characteristics of motion responses due to hydrodynamic interactions. Using a numerical solution from DNV-GL SESAM, coupled stiffness matrix terms for these same FEM models were added to the multiple body modes in the surge direction. Potential theory was used to calculate the first order radiation and diffraction effects on the simulated barge models. In the results, the sheltering effect of the barges was not shown at 1.3 rad/s with hull separation of 20 m in transverse waves. The separation effect between the barges was more clear with longitudinal waves and a shallow water depth. However, sway forces were influenced by hull separation with transverse waves. The peaks for sway and heave motion and sway force occurred at higher frequencies as hull separation narrowed with longitudinal and transverse waves. Given a depth of 10 m, the sway motion on the lee side of a coupled barge made a significant difference in the range of 0.2-0.8 rad/s with transverse and oblique waves. Also, the peaks for sway force were situated at lower frequencies, even when incident waves changed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.250-256
• /
• 2006

The revision of radio waves act, which took effect on July 1,2005, widened the bandwidth of PLC from $9kHz{\sim}450kHz$ to $9kHz{\sim}30MHz$. This high upper limit of frequency may cause the interference in HF wireless communications. From this point of view, the goal of this research is to suggest the estimation method of whether-or-not the interference occurs and furthermore offer countermeasures to avoid it hereafter. Ministry of Information and Communication Radio Research Laboratory(MIC-RRL)has been researching for the interference and devoting themselves to turn out how much it affects to HF wireless communications since the revision took effect. This research suggests some estimation methods with receivers, signal generators, or SINAD(Signal to Noise and Distortion) Meter which is so suitable for the RF environment that we can overcome the existing limit to the EMC environment. In addition, this research is focused on securing the environment for wireless communications by establishing the safety zone or suggesting the ways to prohibit the use of the bandwidth, which may cause serious interference, in order to minimize the effect of PLC on HF maritime mobile telecommunications.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.93-93
• /
• 2019

최근 에너지 효율에 따른 에너지 관련 통신기술의 스마트화 및 융복합화가 진행되고 있다. 또한 기존에 인터넷망만을 이용한 통신기술 외에 유사시 상황을 위한 전력선 통신 기술 개발이 진행되고 있다. 현재 전력선통신은 변복조 모뎀을 전력선 양단에 연결한 뒤 기존에 사용되는 무선통신기술을 변환하는 형태로 사용되고 있다. 이는 낮은 주파수와 높은 전력을 가지는 전력선 특성에 맞지 않아 전력선 통신에 알맞은 통신기술 개발이 필요하다. 이에 본 논문은 전력의 부하에 따라 최적의 에너지 효율을 검색하고 이에 따라 통신 방식을 변경하는 방식을 연구하였다. 이를 위하여 전력선 통신에서 규격별 잡음 모델링을 연구하고 이에 따른 통신방식을 연구하였다.

• Electronics and Telecommunications Trends
• /
• v.30 no.3
• /
• pp.84-94
• /
• 2015

5G와 IoT로 인한 무선 트래픽 급증에 대응하기 위해서는, 무선망 성능 및 주파수효율 향상, 신규주파수할당, 주파수 공동사용 기술 개발 등이 복합적으로 적용되어야 달성 가능하다. 그의 일환으로, LTE를 비면허 대역에 사용하려는 LTE-U(Long Term Evolution-Unlicensed)라는 새로운 패러다임의 수평적 주파수 공동사용 기술을, 이동통신에 적용하려는 시도가 진행되고 있다. LTE-A의 주파수 집성기술을 활용하여, 1차 캐리어를 면허 대역 LTE 기반으로 하고, 2차 캐리어를 비면허 대역 LTE로 묶어서 고속으로 데이터를 전송하는 기술이다. 우선적으로 5GHz 비면허 대역에 적용을 검토하고 있는데, 기존에 사용하던 Wi-Fi 및 기상레이다 등과의 공정한 공존(fair coexistence)이 가장 중요하다. 따라서 각국의 5GHz 주파수 대역 규제 현황, 공존을 위한 LBT(Listen-Before-Talk)통신 메커니즘, 표준화 현황을 살펴본다. 또한 이해 당사자인 Wi-Fi, LTE, 이용자, 기술기준의 입장을 살펴보고, 구현이슈, 지적소유권 동향 등을 검토하고, 기술적 및 정책적 대응전략을 살펴본다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.489-494
• /
• 2013

This study aims to understand the mode characteristics of a droplet under a periodic forced vibration. To predict the resonance frequency of a droplet, theoretical and experimental approaches were employed. A high-speed camera was used to capture the various deformation characteristics of a droplet-mode shape, detachment, separated secondary droplet, and skewed deformation. The comparison between the theoretical and the experimental approaches shows a ~10% discrepancy in the prediction of the resonance frequency, which appears to be caused by the effect of contact line friction, nonlinear wall adhesion, and experimental uncertainty. Owing to contact-line pinning and smaller amplitude, the droplet shape becomes symmetric and the size of each lobe at the resonance frequency exceeds that at the neighbor, which is out of resonance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.498-505
• /
• 1999

The ferrite device that has nonreciprocal characteristics has been used as various microwave components. In this paper, the spectral-domain method was used to analyze the characteristics of structure(strip line on multilayer structure with ferrite material) for which no paper has been published yet. It is assumed that an external dc magnetic field is applied perpendicular to the ground conductor. The propagation constant is calculated for each parameter and frequency. Also we considered convergence by increasing the number of basis functions and verified the numerical analysis results. From the results, we could confirm that as the thicknesses of YIG is increased, the cutoff region is widened and the propagation constant is decreased at the frequency of upper cutoff region. For a larger applied dc magnetic field, the frequency of cutoff region is found to be increased. Also the simulation results for strip line show that the cutoff region is widened and the propagation constant is larger than that of microstrip line.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1591-1592
• /
• 2006

이동 및 정보통신 시스템이 소형화 및 고성능화됨에 따라 System OR Package (SOP) 기술의 연구개발이 주목을 받고 있다. 저가형 SOP를 위하여 가장 많은 연구가 다층인쇄회로 기판에 수동소자 및 전송선로를 내장시키는 것이다. 본 논문에서는, 8층 KB 기판에 Meander line과 Radial/T Stub 패턴을 Advanced Design System(ADS) simulation을 이용하여 설계 및 제작하고 분석함으로써 정확한 SOP 디자인 및 설계 방향을 제시하고자 한다. 설계변수-패턴의 length, width, spacing, 각도와 공정변수-1층/3층, 기판 재질(prepreg(PP)과 resin coated copper(RCC))을 두어 제작하여 그 특성을 비교하였다. Meander Line는 PP보다 RCC에서의 인덕턴스가 크고 높은 자가 공진주파수를 가졌고, 3층보다 1층에서의 인덕턴스가 안정적이었다. Radial/T Stub는 PP보다 RCC에서의 커패시턴스가 작으나, 높은 자가 공진 주파수로 커패시턴스가 안정적이었다. Meander Line은 RCC, 병렬 전송선로 간격-400um, 병렬 전송선로 길이-500um, 1층 설계 시, 인덕턴스-1.60nH, 자가 공진주파수-9.21GHz 특성이 가장 우수하고, Radial Stub는 RCC, $60^{\circ}$, 1층 설계 시, 커패시턴스-0.62pF, 자가 공진주파수-9.06GHz의 특성이 나타났고, T Stub는 RCC, Stub 길이-600um, Stub 너비-150um, 1층 설계 시, 커패시턴스 -0.38pF, 자가 공진주파수-10GHz이상으로 우수한 특성을 나타냈다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.5
• /
• pp.430-439
• /
• 1996

In printed circuit board (PCB) design, it is necessary to predict the crosstalk effect among traces on the circuitary behavior. In this paper, crosstalk between parallel or crossing traces was treated by the finite difference time domain (FDTD) method. They are the typical models of PCB traces and the crosstalk is a major contributor in the creation of electromagnetic interference (EMI). The crosstalk effect was computed for the variation of distance spacing and length of parallel traces and crossing traces. The results in time and frequency domain are discussed and compared with those using MDS(microwave design system) and HFSS(high frequency structure simulator). The comparison shows that the FDTD method can be of wide application in analysis model and save the time required for calculation.

• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.177-182
• /
• 2004

We have observed the saturated absorption spectrum of the P(16) line of the V$_1$＋V$_3$ band of $^{13}$ C$_2$H$_2$ molecule by using the external cavity spectroscopy method. The frequency of laser has been stabilized to the saturated absorption spectrum. The relative contrast of the saturation spectrum is about 7 % with respect to the linear absorption and the linewidth is about 1.8 MHz. The frequency fluctuation of the stabilized LD is about $\pm$20 KHz during the sampling time 100 S.

• Journal of Sensor Science and Technology
• /
• v.10 no.2
• /
• pp.142-147
• /
• 2001

Using transmission-line equivalent circuit based on cross-field model for an interdigital acoustic wave transducer, an efficient simulation technique of SAW filters by SPICE is proposed. Propagation of surface acoustic wave is modeled as transmission line so that frequency-dependent circuit elements are not needed in the equivalent circuit of an interdigital transducer. Because the equivalent circuits for frequency-dependent circuit elements are not derived approximately, and a small number of circuit elements are used in the equivalent circuit for filters, simulation time is much reduced. The utility of the proposed technique is demonstrated through simulation for the characteristics of SAW filters such as insertion loss, input admittance, passband ripple, and harmonic frequency response.