• Title/Summary/Keyword: 주파수 범위

Search Result 1,505, Processing Time 0.027 seconds

Luminous Efficiency of SrS:Ce, Cl EL Device with ZnS Buffer Layer (ZnS 완충층을 사용한 SrS : Ce, Cl 박막 EL 소자의 효율)

  • 임영민;최광호;장보현
    • Korean Journal of Optics and Photonics
    • /
    • v.2 no.3
    • /
    • pp.115-120
    • /
    • 1991
  • The effect of ZnS buffer layer on the brightness and luminous efficiency of SrS : Ce, Cl thin film EL device is investigated. The driving voltage is 210V for the cell with ZnS buffer layer, but 220V without ZnS buffer layer. The frequency range is 500 Hz-20 kHz. The. brightness is proportional to the product of the frequency and the transferred charge density within measured range. The luminous efficiency is independent on the frequency and/or driving voltage. By using the ZnS buffer layer, the luminescence characteristics of active layer is improved. The experimental data shows 0.12 Im/W of the luminous efficiency for the device with ZnS buffer layer, but 0.061m/W without ZnS buffer layer.

  • PDF

Low Phase Noise VCO Using Novel Harmonic Control Circuit Based on Composite Right/Left-Handed Transmission Line (혼합 우좌향 전송 선로 기반의 새로운 고조파 조절 회로를 이용한 저위상 잡음 전압 제어 발진기)

  • Choi, Jae-Won;Seo, Chul-Hun
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.47 no.1
    • /
    • pp.84-90
    • /
    • 2010
  • In this paper, a novel voltage-controlled oscillator (VCO) using the harmonic control circuit based on the composite right/left-handed (CRLH) transmission lines (TLs) is presented to reduce the phase noise without the reduction of the frequency tuning range and miniaturize the circuit size. The phase noise is reduced by the novel harmonic control circuit having the short impedances for the second- and third-harmonic components. The proposed harmonic control circuit is designed by using the CRLH TLs with the dual-band characteristic by the frequency offset and phase slope of the CRLH TLs. The high-Q resonator has been used to reduce the phase noise, but has the problem of the frequency tuning range reduction. However, the frequency tuning range of the proposed VCO has not been reduced because the phase noise has been reduced without the high-Q resonator. The miniaturization of the circuit size is achieved by using the CRLH TLs instead of the conventional right-handed (RH) TLs. The phase noise of VCO is -119.17 ~ -117.50 dBc/Hz at 100 kHz in the tuning range of 5.731 ~ 5.938 GHz.

A Design of a 5 GHz Low Phase Noise Voltage Tuned Dielectric Resonator Oscillator Using Loop Group Delay (루프 군지연을 이용한 저위상 잡음 5 GHz 전압제어 유전체 공진기 발진기 설계)

  • Son, Beom-Ik;Jeong, Hae-Chang;Yeom, Kyung-Whan
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.25 no.3
    • /
    • pp.269-281
    • /
    • 2014
  • In this paper, a systematic design of a low phase noise voltage-tuned dielectric resonator oscillator(VTDRO) using loop group delay is proposed. Designed VTDRO is closed-loop type and consists of a cascade connection of a resonator, phase shifter, and amplifier. Firstly, a reference VTDRO is fabricated and its phase noise and electrical frequency tuning range are measured. Both the phase noise and electrical frequency tuning range depend on the loop group delay. Then, a required value of loop group delay for a new VTDRO with a low phase noise can be systematically computed. In addition, its phase noise and electrical frequency tuning range can be theoretically estimated using those obtained from the measurement of the reference VTDRO. When the loop group delay increases, the phase noise decreases and the electrical frequency tuning range also decreases. The former predominantly depends on the resonator structure. Therefore we propose a systematic design procedure of a resonator with high group delay characteristics. The measured loop group delay of the new VTDRO is about 700 nsec. The measured phase noise of the new VTDRO show a state-of-the-art performance of 154.5 dBc/Hz at 100 kHz frequency offset and electrical frequency tuning range of 448 kHz for a voltage change of 0~10V. The oscillation power is about 4.39 dBm.

A Wideband High-Speed Frequency Synthesizer Using DDS (DDS를 이용한 광대역 고속 주파수 합성기)

  • Park, Beom-Jun;Park, Dong-Chul
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.25 no.12
    • /
    • pp.1251-1257
    • /
    • 2014
  • In this paper, a 6~13 GHz ultra high speed frequency synthesizer having minimum 30 kHz step size and minimum 500 ns frequency settling time is proposed. In order to obtain fast settling time, fine resolution, and good phase noise performance, wideband output frequencies were synthesized based on DDS(Direct Digital Synthesizer) and analog direct frequency synthesis technology. The phase noise performance of wideband frequency synthesizer was estimated by the superposition theory and its results were compared with measured ones. The measured frequency settling time was below 500 ns, phase noise was below -106 dBc @ 10 kHz at 13 GHz, and frequency accuracy was measured below ${\pm}2kHz$.

Performance Analysis of Digital M/W Transmission System adopting Frequency Offset Compensation Algorithm in Multipath Fading Channel (다중경로 페이딩 채널에서 주파수 옵셋 보상 알고리즘을 적용한 디지털 M/W 전송 시스템의 성능 분석)

  • Park, Ki-Sik
    • Journal of the Korea Society of Computer and Information
    • /
    • v.18 no.10
    • /
    • pp.63-70
    • /
    • 2013
  • In this paper, we investigated frequency synchronization through computer simulation of digital M/W transmission system in multipath fading channel. we suggested frequency offset correction algorithm against frequency offset between transmitter and receiver, then evaluated the degree of constellation performance enhancement. From the performance evaluation, in case of large frequency offset, although adopting frequency offset correction scheme, residual frequency offset degraded system performance. As a result, according to frequency offset value between transmitter and receiver residual frequency offset affects system performance significantly. The results of this paper should be utilized for frequency synchronization criterion when frequency band of broadcasting system is rearranged.

A.C.impedance properties on $RuO_2$-based thick film resistors ($RuO_2$계 후막저항체의 교류 임피던스 특성)

  • 구본급;김호기
    • Electrical & Electronic Materials
    • /
    • v.3 no.4
    • /
    • pp.315-324
    • /
    • 1990
  • 저저항(DuPont 1721, 100.OMEGA./sq.)과 고저항(1741, 10K.OMEGA./sq.)의 두 Ru계 후막저항체를 여러 조건에서 소결하여 소결막의 복소임피던스 특성과 임피던스의 주파수의존성을 1KHz-13MHz의 주파수 범위에서 조사하였다. 저저항 1721계의 경우 600.deg.C이상에서 소결한 모든 시편이 거의 저항성분(R)만으로 구성된 등가회로에 해당되는 복소임피던스 거동을 보였으며 임피던스에 미치는 주파수 의존성은 크게 나타나지 않았는데 5KHz까지는 주파수에 따라 변화가 없다가 그 이상의 주파수에서 주파수 증가에 따라 약간씩 증가하였다. 고저항 1741 후막저항체의 경우는 소결조건에 따라 복소임피던스 거동과 임피던스에 미치는 주파수 의존성이 달리 나타났다. 600.deg.C에서는 용량(C) 성분만으로 구성된 등가회로에 해당하는 복소임피던스 거동을 얻었고 주파수 증가에 따라 임피던스가 직선적으로 감소하였으며 700.deg.C이상 900.deg.C까지는 저항(R)과 용량(C)이 병렬로 연결되는 형태의 등가회로에 해당하는 복소임피던스 거동을 얻었고 이때의 임피던스의 주파수 의존성은 저주파수 영역에서는 임피던스가 주파수에 변함없이 일정하다가 5KHz이상의 주파수에서는 주파수 증가에 따라 임피던스가 직선적으로 감소하였다. 1000.deg.C반응에서의 복소임피던스 거동은 RCL성분이 병렬로 연결된 형태의 등가회로에 해당되는 결과를 얻었으며 임피던스도 작아지고 주차수 의존성도 현저하지 않았다.

  • PDF

A New Beam Tracking Technique Using Intermediate Frequency Processing (중간주파수 처리를 이용한 빔추적 능동위상 배열안테나)

  • 서철헌;최태규
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.26 no.7B
    • /
    • pp.891-894
    • /
    • 2001
  • 본 논문에서는 능동 배열 안테나에서 RF 대신 중간주파수를 이용하여 빔 추적을 하는 방법이 연구되었다. 안테나의 각 배열은 전압제어 발진기, 위상추적기, 혼합기와 결합되어 있으며 혼합기는 안테나 상에서 직접 RF 신호를 직접 중간주파수 신호로 변환시킨다. 전압제어 발진기 입력은 위상추적기에 의하여 조절되며 배열 안테나의 주사범위는 위상추적기와 전압제어발진기에 의하여 결정되었다.

  • PDF

A Study of the cis - trans Rotational Isomeric Relaxation in Methyl Acetate (광회절 초음파 공명법에 의한 methyl acetate의 회전이성 완화의 연구)

  • Bae Jong-Rim
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • spring
    • /
    • pp.171-174
    • /
    • 1999
  • Methyl acetate의 초음파 흡수측정을 0.2-10MHz의 주파수 범위, 은도 5-30에 걸쳐 광회절 초음파 공명법을 사용하여 행하였다. 그 결과, cis와 trans에 의한 완화는 단일 완화현상을 보였고 그 스책트럼으로 부터 완화 주파수와 완화강도를 결정하였다. 완화 주파수의 온도 의존성으로부터 활성화 에너지(${\Delta}H^{#}$)=6.6 kcal/mol을, 완화강도의 온도 의존성에서 엔탈피차(${\Delta}H$)=3.4 kcal/mol을 각각 구하였다.

  • PDF

A Study on the Ultrasonic Relaxation of Axial-Equatorial Isomerization in Methylcyclohexane (Methylcyclohexane의 초음파 완화현상의 연구)

  • 배종림;김정구
    • The Journal of the Acoustical Society of Korea
    • /
    • v.17 no.6
    • /
    • pp.3-7
    • /
    • 1998
  • Methylcyclohexane의 초음파 흡수측정을 0.1-2MHz의 주파수 범위, 온도 30-60℃에 걸쳐 1MHz이하에서 정확한 초음파 흡수측정이 가능한 광 회절 초음파 공명법을 사용하여 행하였다. 그 결과, axial과 equatorial에 의한 완화는 단일 완화현상을 보였고 그 스펙트럼 으로부터 완화 주파수와 완화강도를 결정하였다. 완화 주파수의 온도 의존성으로부터 활성 화에너지(△H*)=10.0㎉/㏖을, 완화 강도의 온도 의존성에서 엔탈피 차(△H)=1.8㎉/㏖을 각각 구하였다.

  • PDF

The equalization of low frequency response in automotive space (차량 내 공간에서의 저주파 이퀄라이징)

  • Kim Mi Jung;Kim Lae-Hoon;Sung Koeng-Mo
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • spring
    • /
    • pp.229-232
    • /
    • 2002
  • 콘서트 홀과 같은 대형 공간의 경우와는 달리, 자동차 내의 작은 공간에서는 저주파의 음향 공진으로 인하여 상대적으로 높은 크로스오버 주파수까지 재생된 사운드가 컬러링 된다. 이러한 크로스오버 주파수는 Schroeder의 'large room limit'로 결정되며, 이것은 작은 공간과 대형 공간을 구분하게 되는 기준이 된다. 이러한 컬러링을 보상하기 위해, 먼저 대역 제한된 사인 스윕 신호를 이용하여 특정 차량의 저주파 응답 범위를 크로스오버 주파수까지 측정하였다. 본 논문에서는 이렇게 측정한 저주파 응답을 이퀄라이징하는 방법에 대하여 논의한다.

  • PDF