• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.483-484
• /
• 2008

AC-PDP는 구조적으로 2장의 유리, 유전체, 전극으로 구성된다. AC-PDP의 전기적특성은 유전체의 물성에 크게 좌우된다. AC-PDP의 유전체는 주변 온도와 주파수에 따라 유전율 및 유전손실 특성이 달라지므로 온도와 주파수에 따른 유전물질의 물성변화와 panel의 전기적특성에 대한 연구가 필요하다. 본 논문에서는 온도와 주파수에 따른 AC-PDP내 유전체의 유전율 및 유전손실에 대한 특성에 대해 알아보고 4인치 test 패널을 제작하여 온도와 주파수에 따른 panel의 전기적특성 관계를 살펴보았다.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.477-482
• /
• 2001

The velocity changes of magneto surface acoustic wave (MSAW) have been investigated in the MSAW devices composed of wedge type transducer and as-sputtered ($Fe_{1-x}$ $Co_{x}$ )$_{89}$ $Zr_{ 11}$ (x=0~1.0)amorphous films on glass substrates. The velocity changes of devices depended sensistively on exciting frequency of MSAW, applying the DC bias magnetic field. film thickness and film composition. Particularly. it was conformed that velocity changes increased with the increase of the exciting frequency of MSAW and the thickness of magnetic films. A device deposited x= 0.8 film along the MSAW propagation direction among the devices exhibited a large velocity change of 0.062% at 8.7 MHz for the applied field of 70 Oe.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.2
• /
• pp.110-119
• /
• 2002

Acoustic characteristics of water sediment were experimentally studied in laboratory. Water saturated sand sediment less than the grain size of 0.5 mm diameter is uniformly distributed in an acryl box (100 mm×100mm×42mm) with material thickness 1 mm. Pores in the acryl box are modeled as the structure of cylindrical pore tubes (diameter 3 mm and length 42 mm) filled with water. Cylindrical pore tubes have porosities 0%, 5%, 11%, 18% and 26 % controlled by the tube numbers. Transmitted acoustic waves through sand sediment specimen are analyzed as the functions of porosity and frequency from 0.3 MHz to 4 MHz. Transmitted acoustic waves are mixed with the first-kind wave from whole specimen and the second-kind wane from cylindrical pore tubes. For the center frequency 1 MHz, the first kind wave is dominant but for the center frequency 2.25 MHz, the second kind wave is dominant. In the case of the first-kind wave, as the porosity increases, the transmission coefficient decreases and the sound speed decreases to the sound speed of water. As the frequency increases, the transmission coefficient decreases but the sound speed is almost constant. In the case of the second-kind wave, as the porosity increases, the transmission coefficient increases but the sound speed is almost constant. The transmission coefficient and the sound speed are almost constant as a function of frequency.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.2
• /
• pp.173-179
• /
• 2001

성능지수는 제어 대상이 되는 구조물의 응답과 제어기의 성능에 관한 가중함수로 구성되어 있다. 따라서 가중함수의 설계에 따라 성능지수가 변화되며 제어 효율이 달라진다. 본 논문에서는 최적 능동제어 알고리듬의 일종인 시간 영역에서의 성능지수를 고려한 LQR기법과 LQG기법 및 주파수 영역에서의 성능지수를 고려한 H₂기법에 대하여 동일한 가중함수를 적용하여 제어 성능인 제어율과 제어력을 비교하는데 목적을 두고 있다. 그러나, LQG기법은 모든 상태 변수를 알아야 하는 LQR기법의 한계를 극복할 수 있으며 LQR기법과 동일 수준의 제어율과 제어력을 보이고 있고 출력 제어라는 장점을 고려하면 현실적인 기법이라고 말할 수 있다. 마지막으로 구조물 응답과 제어기의 주파수 특성을 고려하여 주파수 필터의 가중함수를 설계하는 H₂기법을 분석하였다. H₂기법은 제어력을 저주파수 영역에 집중시킬 수 있기 때문에 구조물 응답을 효과적으로 제어할 수 있는 방법으로 분석되었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.110-116
• /
• 2006

In this paper the algorithm of a methodology for the calculation of spectrum requirements was implemented. As well, the influence of traffic distribution ratio among radio access technology groups, spectral efficiency, and flexible spectrum usage(FSU) margin was analyzed in terms of the spectrum requirements, with a view toward for future development of IMT-2000 and systems beyond IMT-2000. The ratio of the spectrum requirement to the traffic distribution ratio is approximately $1\;GHz/20\;\%$, and the spectrum requirement varies from 5 to 9 GHz. As the FSU margin increases by 1.0 dB, the total spectrum requirement decreases by 0.9 dB. The required spectrum for the market input parameter, ${\rho}=0.5$ is 801.63 MHz, while the required spectrum for ${\rho}=1.0$ is 6295.4 MHz. It can be concluded that the market input parameter is the most effective parameter in the calculation of spectrum requirements.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.5 no.2
• /
• pp.139-150
• /
• 1981

미니컴퓨터와 디짓틸 상관법을 이용하녀 이상적인 아나로그 씨스템의 주파수 응답을 구하고 그 결과를 이론치와 비교하여 디짓탈 데이타 처리방법의 타당성을 검증하였다. 또한 이 방법을 실제로 복잡한 절삭중의 공작기계의 주파수응답 ㅕㄹ정에 적용하여 이때 야기되는 문제점을 검토하고 그 해결방안을 제시하였다. 또한 제 절삭 조건하에서 얻어진 주파수응답 함수로부터 공작기계의 아버 및 시편의 길이, 절삭 속도, 절삭깊이, 피이드율에 따른 공작기계 구조동력학의 변화를 규명하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.55-56
• /
• 2018

In this paper, a method for analyzing the dielectric constant of a planar substrate is proposed. To this end, a band-stop filter was created by adding a H-shaped resonant aperture to the ground plane of a microstrip transmission line. A planar substrate of 2 mm thickness was placed behind the ground plane of the microstrip transmission line and the change of the resonant frequency with the change of the dielectric constant of the substrate was investigated. It can be seen that the change ratio of the frequency to the reference resonant frequency is larger than that of the conventional complementary split ring resonator structure.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.1
• /
• pp.8-12
• /
• 2010

In this paper, we studied on AR model order decision for extraction of EMG median frequency by t-test and ANOVA and comparison of median frequency. And we extracted well-known parameters such as zero crossing rate(ZCR), low band energy(Band) and median frequency(MDF) from surface electromyogram (EMG). And we compared to evaluate themselves as measures for fatigue.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.13-20
• /
• 1989

An accurate design method for rectangular microstrip patch antenna that can be applied to wide range of frequencies (C-band to X-band) is proposed. With due regard the frequency dependent effective dielectric permittivity to design formula, the inaccuracy of previous design formulae can be overcome. The results predicted by new procedure are compared well experimental results that had varying operation frequencies between 7GHz and 15GHz. Antennas are fabricated over microwave substrates with the same dielectric permittivity and thickness. Radiation power patterns are also measured and they well with theoretical values.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.211-213
• /
• 2003

무전극 램프에서 유도 결합형 플라즈마가 많이 사용되는데, 코일의 권선수나 주파수에 의해 전기적 특성의 변화가 크다. 따라서, 기존의 환형 무전극 형광램프에 사용되는 ferrite core나 coil을 새롭게 적용하기 위하여 투자율이 2000인 Mn-Zn ferrite를 사용하여 주파수별로 coil의 권선수를 변화시키며 전기적 특성을 측정하여 기존의 무전극 램프와 비교하였다.