• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1023-1030
• /
• 2023

FMCW LiDAR system with robust target detection capabilities even under adverse operating conditions such as snow, rain, and fog is addressed in this paper. Our focus is primarily on enhancing the performance of FMCW LiDAR by improving the characteristics of the frequency-modulated laser, which directly influence range resolution, coherence length, and maximum measurement range etc. of LiDAR. We describe the utilization of an unbalanced Mach-Zehnder laser interferometer to measure real-time changes of the lasing frequency and to correct frequency modulation errors through an optical phase-locked loop technique. To extend the coherence length of laser, we employ an extended-cavity laser diode as the laser source and implement a laser interferometer with an photonic integrated circuit for miniaturization of optical system. The developed FMCW LiDAR system exhibits a bandwidth of 10.045GHz and a remarkable distance resolution of 0.84mm.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1182-1187
• /
• 2006

본 논문은 필립스의 오디오 핑거프린트 추출 방식을 기반으로 기존의 방식이 주파수 영역을 너무 조밀하게 분석하는 특징을 지적하고 개선 방안으로 양자화를 통해 필터 뱅크의 에너지 변화율을 오디오 핑거프린트 추출시 반영하는 방법을 제안하였다. 또한 제안된 알고리즘을 사용하여 PDA 로 실제 어플리케이션을 구현하는 것을 목적으로 하고 있다. 제안된 방식은 필립스 방식과 동일한 메모리 크기를 유지하기 위하여 필터 뱅크의 개수를 33 개에서 17 개로 줄이고 필터 뱅크의 변화량을 2 비트로 할당하는 방식을 사용하였다. 변화량을 비트에 할당하기 위하여 음악 데이터 베이스로부터 추출된 각 밴드의 pmf를 통해 음악의 고유성을 최대로 증진 시킬 수 있는 임계치를 찾아내고 이것을 바탕으로 필터 뱅크의 변화량을 2 비트로 할당하였다. 이 같이 추출된 오디오 핑거프린트를 기반으로 PDA 와 음악 검색기 서버와의 통신을 이용하여 사용자가 요청한 쿼리 음악에 관련된 정보를 제공하는 시스템을 구현했다. 제안된 방식은 다양한 주변 잡음 환경에서 평가되어 기존의 필립스 방식 보다 성능 향상 물론 검색 속도 또한 개선되는 특징을 확인할 수 있었다.

• Journal of the Korean Society of Radiology
• /
• v.10 no.4
• /
• pp.247-253
• /
• 2016

Ultrasound devices diagnose many disease, which is widely used, can not be standardized quantitative evaluated in order to evaluate sonography image of quality. Therefore, in this papers, aims to get correct image in order to accurate diagnosis by figuring out the appropriate parameter based on each target by measuring distortion which results in the analyzation of the sensitivity of SNR and the histogram of signal by manipulating parameter of 8 mm target in ATS-539 multipurpose phantom. Equipment using Acuson sequoia 512, convex probe and utilizes multi-objective phantom. experiment method is that first you put the phantom on the flat and acquire 85 sheets of image, changing frequency(2,3,4 MHz, harmonic 3, 4, 4.5 MHz), Focus(2, 4, 6 unit), and Dynamic Range(58, 68, 78, 88, 98) for a 8 mm structure. through the Image J program. The sensitivity angle of 8mm target through Image J program is gauged by each separate target SNR and the distorted angle subtract and measure Histogram of background from Histogram of signal and take top 40% from the given result value above. According to parameter variation we found out proper parameter by acquiring SNR of sensitivity and distortion data for aspect of transition. The more this findings have Focus, the lower distortion value and at 4 MHz frequency this result have high SNR and low distortion value. Dynamic Range got an appropriate image on 88 and 98. It is considered on the basis of the experimental data, the probability of disease diagnosis will get higher.

• Journal of Aerospace System Engineering
• /
• v.17 no.1
• /
• pp.42-50
• /
• 2023

In this study, hexagonal ferrite powder with chemical formula SrZn_2-xCo_xFe₁₆O₂₇ was synthesized by a solid-state reaction method and its electromagnetic (EM) wave absorption characteristics were evaluated in the frequency range of 0.1-18 GHz with absorber thickness range of 0 - 10 mm. Reflection loss (RL) affecting electromagnetic wave absorption performance was calculated based on the transmission line theory using measured complex permeabilities and permittivities. RL spectra were also directly measured for some samples. They were well matched with calculated results. High-frequency complex permeability characteristics were changed gradually according to the amount of Co substitution (x). The EM wave absorption frequency band could be tuned accordingly. Hexaferrite samples with x = 1.0, 1.25, and 1.5 exhibited remarkable maximum electromagnetic wave absorption performances with minimum RL (RL_min) lowered than -50 dB. They also showed a very broad frequency band (Δf > 10 GHz) in which more than 90% of the EM wave energy absorption occurred (RL ≤ -10 dB).

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.142-147
• /
• 2020

This study investigates the effects of moisture content on diffuse ultrasound to be applied for the evaluation of micro-structural damage in concrete subjected to various environmental conditions. We monitored diffuse wave parameters for concrete samples in process of water saturation for 5 days. Dried samples were immersed in a water bath, and the change of moisture content in concrete were estimated by measuring the change of mass. For the diffuse wave analysis, a frequency range of 500 kHz, which represents a scattering regime of ultrasound in concrete, was selected. The test results reveal that the ultrasonic diffusivity slightly changed, and the ultrasonic dissipation significantly increased by approximately 120% in the process of water saturation. Therefore, the moisture content in concrete should be considered for the evaluation of micro-structural damage using diffuse wave techniques.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.2
• /
• pp.171-178
• /
• 2015

3GPP long-term evolution(LTE) band 2.3~2.4 GHz is adjacent to 2.4~2.5 GHz band for WLAN, and therefore compatibility study of the two systems is desirable. We propose a dynamic system simulation methodology to investigate the effect of WLAN interference on LTE systems. As capturing space/time/frequency changes in system parameters, the dynamic system simulation can exactly predict real system performance. Using the proposed methodology, we obtain LTE downlink throughput loss for the frequency separation between the two systems. Throughput loss under 1 % is obtained from guard band over 11 MHz(single channel allocation) or 10 MHz(three channel allocation).

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.5
• /
• pp.103-109
• /
• 2002

The paper investigates the change of frequency response characteristics on two-stage gear reduction servo system according to the variation of backlash amount of each gear reduction stage, under the condition that the backlash of total system is constant. It is shown that the frequency response characteristics of the system heavily depend on the contribution ratio which is defined as a ratio of the first backlash amount to the total backlash. It is also found that there is an optimal backlash combination to maximize the bandwidth of two-stage gear reduction servo system when the allowable total backlash is determined.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.183-186
• /
• 2004

본 논문에서는 수중 초음파 통신용 QPSK 버스트 수신기를 DSP시스템을 이용하여 구현하기위한 시스템 설계에 대하여 논한다. 본 논문에서 고려하는 시스템은 25kHz의 반송주파수를 사용하고, 심벌율은 5kHz이며, 데이터 전송율은 10,000bps이다. 송신기에서 심벌정보를 전송하기 위해 펄스성형필터를 거친 신호를 디지털 믹서기를 이용하여 디지털 영역에서 반송주파수 대역으로 신호를 변조한 후 200kHz로 샘플링하는 D/A변환기를 이용하여 전송 아날로그 신호를 생성한다. 수신기에서는 수신 신호를 디지털로 처리하기 위하여 100kHz로 free running하는 A/D 변환기를 이용하여 수신 데이터를 얻는다. 수신기에서는 32심벌 길이의 프리앰블을 이용하여 프레임 동기를 찾음과 동시에 개략적인 심벌시간 동기와 위상편이를 추정한다. 추정한 위상편이값은 2차 PLL (phase-looked loop)의 초기값으로 사용하여 위상 추적을 수행하는 전송 시스템이다. 또한, 된 논문에서는 실해역 전송 시험 테이터를 통하여 조류의 변화에 의해 발생하는 Doppler 편이를 보상하기 위하여 PLL이 필수적으로 필요함을 보인다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.131-138
• /
• 2008

The channel parameters such as RMS delay spread and Doppler frequency have an effect on performance of system. This paper investigates the effect between the Inter-Code Interference (ICI) and the frequency diversity gain in the multi-rate MC-CDMA system. The multi-rate MC-CDMA system has achieved the more variable data rate than the MC-CDMA and moreover it has the better performance than the OFDMA system, because it has achieved the frquency diversity gain. However, the frequency diversity gain and ICI have a trade-off relationship by using the spreading code. Therefore, we have improved the system performance by efficient choice of system parameters. In order to evaluate the effectiveness of the frequency diversify gain and the ICI effect, we perform simulations by altering the Doppler frequency and RMS delay spread.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1707_1708
• /
• 2009

Unit master control(UMC)는 발전소의 요구 부하신호를 설정하는 최상위의 제어레벨이며 UMC의 설정값은 자동급전 지령신호(Automatic Dispatch System : ADS) 또는 운전원이 설정하는 값에 따라 보일러 및 터빈 Master에 Unit 요구 신호를 출력하여 하위제어 레벨인 공기, 연료, 급수 등을 조절할 수 있는 기기에 Unit 부하 요구 신호(Unit Load Demand : ULD)에 따라 제어 되도록 하는 방법으로서, Unit 목표부하 설정, Unit 목표부하 상/하한 제한, 목표부하 변화율 제한, 주파수 보정, Runback/Rundown/ Runup, 보일러 및 터빈 Demand 신호생성의 기능을 가지고 있다.