• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.155-162
• /
• 2000

전해 인프로세스 드레싱(ELID)의 응용기술로써 간헐적 드레싱(ELID II) 및 무전극 드레싱(ELID III)이 원통내면 마무리 연삭에 이용되고 있다. 주철본드(CIB-D) 및 메탈레진본드 다이아몬드 숫돌(HRB-D)이 이 방식들에 사용되고 있다. 경면 가공에 있어서 이 두방식은 미립의 숫돌이용으로 일반연삭기에 정밀부속 장치의 보완없이 이용될 수 있다. ELID II 연삭에서 CIB-D숫돌은 파이프 형상의 전극에 의하여 간헐적으로 드레싱되고, 반면에 MRB-D 숫돌은 인프로세스 드레싱 되며 전극은 필요로 하지 않는다. 본 연구에서는 ELID II 및 ELID III 방식에 있어서, 연삭조건 및 연삭입자크기에 대한 연삭특성을 비교검토 하였다. 그 결과, ELID II, III방식 공히 대단히 작은 표면거칠기를 갖는 경면이 얻어짐을 확인하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.161-165
• /
• 1993

최근 산업의 발달과 함께 제품의 고정도화,다양화,생산성 향상등의 요구에 의해 연삭가공에 있어서도 고능률.고정도가공이 주목되고 있다. 특히 반도체산업,광산업 등에 넓게 응용되고 있는 광학소자 가공에서는 가공정도와 가공능률이 동시에 달성되는 것에 대한 요구가 많지만, 이러한 광학소자의 가공에 있어서 기존의 연마방법은 가공정도와 가공능률에 한계가 있었다. 그런데 연삭가공에서 고능률,고정도가공의 한가지 방법으로 "전해 인프로세스드레싱(Electrolytic In-Process Dressing;ELID)연삭법"이 개발되어 고강도 메탈본드숫돌에 의한 초경합금,세라믹재료등의 경취성재료를 고품위 가공하고 있다. ELID연석법이란 숫돌의 다이아몬드나 cBN등의 연삭입자를 결합하고 있는 금속결합재를 전기분해에 의해 적당량 제거하여 일반적인 연삭과 같이 연삭입자를 연속적으로 돌출시켜 가공이 유지되도록 하는 연삭방법이다. 본 연구는 ELID연삭기술을 이용하여 원통연삭에서 철갈재료 및 세라믹재료의 고능률.고정도 가공특성을 살펴보았다. 원통연삭에서의 주철파이바본드숫돌 및 코발트본드숫돌에 의한 ELID연삭과 비트리파이드본드숫돌에 의한 일반연삭과의 고능률 가공특성을 비교하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.8
• /
• pp.99-105
• /
• 1995

This paper provides a highly efficient grinding for ferrous materials using ELID-grinding method. The grinding efficiency using ELID gring method with CIFB-cBN wheel and CB-cBN wheel is compared with general grinding method with V-cBN wheel. This paper measured grinding ratio for plunge grinding and grinding resistance for traverse grinding in order to investigate grinding ability. The results show that ELID grinding methods is useful for the high efficient grinding of ferrous materials.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.9
• /
• pp.18-24
• /
• 2001

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.122-128
• /
• 2000

세라믹, 다이야몬드등과 같은 고경질재료에 대한 미소형상의 가공은 대단히 어렵고 일반적인 방법으로는 상당한 시간을 요구한다. 이러한 재료의 고능률 가공을 실현하기 위하여, 메탈본드 다이야몬드휠에 전해 인프로세스 드레싱(Electrolytic In-Process Dressing)을 적용한 연삭을 머시닝센타에서 시도하였다 본 연구에서, 메탈본드 다이야몬드휠은 전기방전에 의하여 고능률로 트루잉(truing)되었다. 알루미나 세라믹의 핀선단($\phi$50$\mu\textrm{m}$)과 로커웰 경도측정기의 다이야몬드 압입자(indenter)($\phi$40$\mu\textrm{m}$)를 ELID연삭에 의하여 창성하였다. 그 결과를 본 논문에서 보고한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.61-64
• /
• 1995

Grinding has been adapted as a finishing process,which can carry out form and surface integrity at the same time. Recently, high efficient and precise grinding technique is required bacause the needs for functional parts such as silicon wafer,ceramic,and electric materials are increasing. Accordingly, the development of grinding wheel appropriate to that purpose is very important. So, in this paper we newly developed a diamond grinding wheel by applying the superior characteristics of spheroidal graphite of the cast iron sintered product. Especially, a electric resistance sintering method was applied in which rapid heat treatment is possible. Finally, we have achieved successful results that the grinding wheel has high hardness,durability and grinding ability,and satisfies above conditions.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1486-1496
• /
• 1993

The diamond wheel with superabrasive is required for mirror-like surface grinding of brittle materials. But the conventional dressing mothod can not apply to the diamond wheel with superabrasive. Recently electrolytic dressing method was developed for cast-iron bonded diamond wheel with superabrasive. This technique can take replace of lapping and polishing. Using the electrolytic dressing, the surface roughness of workpiece was improved largely and grinding force was very low and the continuity of the grinding force was also very improved. In this study, the purpose is the realization of mirror-like surface grinding of ferrite with electrolytic dressing of metal bonded diamond wheel. For application of ultraprecision grinding for brittle material, superabrasive wheel, air spindle and inprocess electrolytic dressing were used. In addition, the effects of pick current and pulse width on ground surface were investigated, and the suitable dressing conditions for ferrite were found out.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.11
• /
• pp.132-137
• /
• 2001

Application of ceramics, carbide, ferrite has grown considerably due to their mechanical properties such as high degree hardness, chemical stability, super wear resistance. Despite these characters, the use of advanced material has not increased because of poor machinability. The application of metal bonded wheel was proposed. But it is difficult that metal bond wheel can be dressed. Recently, to solve this problem, the technology of in-process electrolytic dressing is developed. This method need wheel for electrolytic dressing, power supply and electrolyte. The aim of this study is development of CIB-D wheel for electrolytic and its evaluation of electrolytic characteristics, and achieve ultra-precision lapping of carbide, optic glass.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.5
• /
• pp.34-39
• /
• 2000

Application of ceramics has grown considerably due to significant improvement in their mechanical properties such as light weight, chemical stability and superior wear resistance. Despite these character, the use of ceramics has not increased because of poor machinability. The method of using of super-abrasives metal bond wheel was proposed. But it is difficult that super-abrasives metal bond wheel can be dressed. Recently, the technology of in-process electrolytic dressing is developed to solve this problem. If this method is applied, loading and glazing are disappeared apparently. The aim of this study is to determine the machining characteristics in terms of lapping wheel speed, machining time, pressurized weight to the workpiece and peak current using in-process electrolytic dressing applied to the CIB-diamond lapping wheel to achieve ultra-precision lapping machining technique.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.53-56
• /
• 1995

Electrolytic In-Process Dressing grinding technique which enables application of metal bond wheels with fine superabrasives in mirror surface grinding operations has developed. This paper provides charateristic evaluation of power supply supply that we developed and general charateristics of ELID grinding. The electric behaviors are compared each about two different electrode which has 1/4, 1/6 the area of entire wheel surface, and two different fluids which has 1:50, 1:30 the quantity of water was used to dillute grinding fluids. The results show that ELID grinding method is useful for mirror surface machining.