• Radiation Oncology Journal
• /
• v.28 no.1
• /
• pp.39-49
• /
• 2010

Purpose: This aim of this study is to analyze the dosimetric difference between intensity-modulated radiation therapy (IMRT) using 3 or 5 beams and MSF in the radiotherapy of the left breast. Materials and Methods: We performed a comparative analysis of two radiotherapy modalities that can achieve improved dose homogeneity. First is the multistatic fields technique that simultaneously uses both major and minor irradiation fields. The other is IMRT, which employs 3 or 5 beams using a fixed multileaf collimator. We designed treatment plans for 16 early left breast cancer patients who had taken breast conservation surgery and radiotherapy, and analyzed them from a dosimetric standpoint. Results: For the mean values of $V_{95}$ and dose homogeneity index, no statistically significant difference was observed among the three therapies. Extreme hot spots receiving over 110% of the prescribed dose were not found in any of the three methods. A Tukey test performed on IMRT showed a significantly larger increase in exposure dose to the ipsilateral lung and heart than multistatic fields technique (MSF) in the low-dose area, but in the high-dose area, MSF showed a slight increase. Conclusion: In order to improve dose homogeneity, the application of MSF, which can be easily planned and applied more widely, is considered an optimal alternative to IMRT for radiotherapy of early left breast cancer.

• Conservation Science in Museum
• /
• v.24
• /
• pp.17-36
• /
• 2020

This paper describes the consevation treatment of eleven bigyeokjincheolloe bomb shells that were excavated from the Joseon-period local government office and fortress of Mujang-hyeon (present-day Mujang-myeon) in Gochang in 2018. It also provides information on the production method of the shells revealed through CT scanning, gamma-ray transmission imaging, and metallographic analysis. In preparation for the special exhibition "Bigyeokjincheolloe" at the Jinju National Museum in 2019 (July 16 to August 25), contaminants were removed from the shells and their surface was reinforced during the first phase of conservation treatment. Furthermore, the closures for the shells were identified for the first time. Regarding the production of the shells, the CT scanning and gamma-ray transmission imaging identified many blowholes in the interior of the body and the use of a chaplet on the side of one shell. The side of the body proved to be relatively thinner than the top and bottom. The traces of a hole for pouring molten metal into the center of the bottom indicates that molten metal was indeed emptied into the inverted body. In the metallographic analysis of two of the bodies and one lid, cementite and pearlite structures were identified on the body, indicating that it was made by casting. The presence of the ferrite structure with a partial distribution of the pearlite along with non-metallic inclusion in the lid suggested that the lid was made by forging.

• Journal of Conservation Science
• /
• v.30 no.1
• /
• pp.81-93
• /
• 2014

As the Seated Iron Buddha Statues, Vairocana Buddha of Dopiansa Temple in Cheolwon, Nosana Buddha of Samhwasa Temple in Donghae and Sakyamuni of Mangisa Temple in Pyeongtaek were made during Unified Silla to Koryo Dynasty. These are damaged degradation which are crack, break-out, peel off and various pollutant. As a result of deterioration evaluation using radiography, crack, gap, break-out, pore space and restoration material are confirmed inside in the Buddha Statues. Based on iron strength, the Buddha Statues will be maintain current state as long as a high external impact is not applied. Also, iron core and nails used for fixing of internal and external framework were observed in the Buddha Statues. According to prominent line of surface, embossed inscription, hands cast separately and combined, the Buddha Statues were made by using division casting.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.251-256
• /
• 2020

In recent years, digital technology has been developed in dentistry, which denture frameworks can be manufactured using DMLS (Direct Metal Laser Sintering) technique. A traditional impression method can be replaced by oral scanning and wax pattern production process can be achieved by the use of CAD/CAM techniques. The designed STL files can be sent to DMLS devices to fabricate final components of removable partial dentures (RPD). The advantages of digital dentistry are concision and precision. In this case study, a fracture of occlusal rests providing support and indirect retention was repaired by DMLS and laser welding techniques. It shows satisfactory results in adaptation accuracy and functional properties of the repaired denture.

• Journal of Conservation Science
• /
• v.16 s.16
• /
• pp.52-63
• /
• 2004

This study tries to investigate the differences in combination of gold and other metals used in the surface guilt of the gold-guilt relics found in the Seonwonsa Temple of the Korea Dynasty. Our findings are as follows. The gilded roller knobs found in the Seonwonsa Temple of the Korea Dynasty can be classified into three groups by the color of the surface guilt: gold, white-gold, red-gold. By the color it is found that gold type contains $Au\;81.0\%,\;Ag\;3.5\%,\;Cu\;5.6\%$, white-gold type contains $Au\;82.1\%,\;Ag\;10.6\%,\;Cu\;2.4\%$, and the red-gold type contains $Au\;59.9\%,\;Ag\;3.7\%,\;Cu\;33.2\%$. The gold metal used for guilt is found to be amalgam of Hg and the depth of the guilt was uneven with the average of $2.5\~25{\mu}m$. These gilded roller knobs were produced in two methods. One of them was made out of pure bronze, and the other out of bronze veneer and led. Since we found led on the outer surface, we conclude that the led juncture was later guilt with gold.

• Journal of Conservation Science
• /
• v.34 no.2
• /
• pp.119-128
• /
• 2018

This study revealed the material composition and characteristics of 19 glass fragments excavated from stone chamber No. 1 of Jeongchon Tomb in Naju through chemical composition analyses and observations. These characteristics were compared with the characteristics of the glass fragments excavated from No. 3 tomb of Bogam-ri in Naju. The purpose of this study was to identify the characteristics of the ancient glass of the Mahan-Baekje period. The glass fragments excavated from the Jeongchon Tombs can be classified into purplish blue, light-purplish blue, greenish blue, green, and mixture of purple blue and purple, based on their color. These beads were made using a drawn and casting technique. In addition, blue glass fragments were primarily excavated form No. 3 tomb of Bogam-ri. However, red glass fragments were not excavated from either of the tombs. According to chemical composition analyses, soda glass group and potash glass group were common in both the tombs. Additionally, alkali mixed glass group and lead barium glass group were excavated from Jeongchon Tombs and No. 3 tomb of Bogam-ri, respectively. The glass fragments excavated from No. 3 tomb of Bogam-ri have more color variations than those excavated from Jeongchon Tombs.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.1
• /
• pp.100-116
• /
• 2023

The Sinamsa Temple was built in the late Goryeo Dynasty and a gilt-bronze seated Buddha is enshrined in Geungnakjeon hall in the precinct. Various damages occurred in the gilt layer of the Buddha, such as peeling of the gilt layer and deteriorating gloss. In the study, the conservation conditions of the inside and outside on the statue were accurately investigated, and the making technique was interpreted through the material characteristics and non-destructive diagnosis of the statue. As a result, it is estimated that gold-gilding layer is pure gold, coloration pigment of black is carbon, green is malachite, atacamite and verdigris, red is red lead and cinnabar, respectively. In the deterioration evaluation, peeling, cracking, break out and exfoliation of the gilt layer are confirmed as damages, but the conservation condition is relatively wholesome. However, the gloss of the gilt layer is calculated to be wider in the poorer part than the maintenance part. The ultrasonic velocity of the statue was calculated to be 1,230 to 3,987 (mean 2,608) m/s and showed a relatively wide range. In infrared thermography, peeling was not confirmed, and no special bonding marks were found. In endoscope, some biological damage and corrosion were observed on the surface of the internal metal, and sealed artifacts were identified. Manufacturing technique based on the study, it is considered that the gilt-bronze seated Buddha was cast at once, and the mold was inverted to inject molten metal.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.337-344
• /
• 2015

Purpose: The purpose of present study is to examine the correlation between the accuracy of abutment preparation and the marginal adaptation of metal coping. With this view, this study compared the correlations regard to the three different manufacturing methods of selective laser sintering technique, milling and casting. Materials and methods: Two master models were made in a different way. First model with deep chamfer margin was prepared directly by a general clinician and the second model was designed by 3-D designing software program with the same abutment preparation principle and produced by computer aided manufacturing. 12 Co-Cr alloy copings were produced respectively with three different method; SLS system, CAD/CAM milling and conventional lost wax technique from each master model. The total 72 copings fully sit on the master model were stereoscopically evaluated at 40 points along the entire circumferential margin. Results: Significant differences in the absolute marginal discrepancies of Co- Cr copings from SLS system (P=.0231) and casting method (P<.0001) were shown between hand preparation model and computer designed model. However, no significant difference was found between the two model groups from milling method (P=.9962). Conclusion: Within the limitation of this study, the effect of the accuracy of abutment preparation on the marginal adaptation of Co-Cr coping is statistically significant in SLS system and casting group. The copings produced by SLS system exhibited the lowest marginal discrepancies among all groups, and the marginal gap of this method group was influenced by the accuracy of the abutment preparation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.3
• /
• pp.246-251
• /
• 2014

In case of prosthesis fabrication by CAD/CAM, location, area and contour of occlusal contacts can be adjusted so more functional occlusion can be acquired. Also, errors in a manufacturing process is reduced compared to cast metal prostheses and porcelain fused metal prostheses fabricated by conventional methods such as casting and porcelain build up. Therefore, prostheses by CAD/CAM show superior occlusion accuracy. Recently, virtual articulator function has been introduced to CAD/CAM system, which reproduces mandibular movement against maxilla. Thus, it is possible to consider occlusal interference in anterior/lateral movement as well as closing movement. There have been many studies on the marginal and internal fit of prostheses using zirconia but the occlusal fit of zirconia crown fabricated by CAD/CAM has not been researched as much. In this case report, 7 zirconia crowns were designed and fabricated by CAD/CAM for total 5 patients. The models of zirconia crowns before and after occlusal adjustment during intraoral try-in were scanned for occlusal contacts, which were compared to evaluate accuracy of prostheses and understand patterns of occlusal adjustment. Most of the occlusal adjustments were done on functional cusps and slopes of zirconia crown, and the magnitude of occlusal adjustment ranged from $15{\mu}m$ to $60{\mu}m$. In the zirconia crown fabricated with CAD/CAM systems, the occlusal adjustment is a necessary procedure, so additional procedures will be needed for compensating reduced mechanical properties.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.6-6
• /
• 2018

본 연구에서는 고문헌에 기록된 도금 재료와 도금법 등을 확인하고 이를 기초자료로 활용하여 매실산을 사용한 금(Au)-수은(Hg) 아말감기법으로 고대 도금(鍍金)기술을 되살리고, 이를 토대로 경주 월지에서 출토된 금동삼존판불을 복원하였다. 먼저, 전통 도금법을 되살리기 위해서, "오주서종박물고변", "확지신편", 조선시대 각종 의궤 등에 공통적으로 기록되어 있는 매실에 주목하고, 매실을 3~4개월 발효 숙성 후 착즙한 뒤 그것을 농축하여 만든 매실산을 도금 실험에 적용하였다. 금아말감 도금을 위하여 월지 출토 금동삼존판불의 바탕소지금속인 청동삼존판불을 구리와 주석 89:11(Cu:6kg, Su:750g)로 합금하여 주물사 주조법으로 복원하였으며, 동일한 합금비로 제작된 $2.3cm{\times}3.5cm$(가로${\times}$세로)의 시편에 사전 실험을 실시하였다. 현대적 산처리 방식에 사용되는 질산과 전통방식으로 사용되는 매실산으로 시편에 산처리 한 후 각각 비교해 보고, 금분과 금박, 상온과 가온에 따른 아말감상태를 비교하는 실험을 진행하였는데, 실험에 사용된 매실산 70%는 pH가 1.94로, 오늘날 산처리에 사용하고 있는 질산 20%와는 차이가 있지만, 청동 시편 실험을 통해 매실산에 20분 정도 담근 뒤 금아말감을 도포 후 24시간 지나 가열($380{\sim}400^{\circ}C$) 했을 때 금도금이 잘 되어, 현대적 방법인 질산처리로 도금을 한 시편과 큰 차이가 없는 것으로 관찰되었다. 사전 실험을 통한 결과를 적용한 월지 출토 금동삼존판불 복원은 청동삼존판불 표면처리, 금-수은 합금 및 도금하기, 도금 후 표면처리의 순서로 진행되었는데, 금과 소지금속의 밀착력을 높이기 위해 표면을 숯을 이용해 탈지한 후 물로 씻어내고 매실산을 도포하여 20분 동안 두어 부식 및 세척을 시행하였다. 금도금을 위한 금-수은아말감은 가온할 때 수은이 증발하는 양을 고려하여 금1 : 수은10 비율로 합금하여 완성하였으며, 금아말감 도포 후 약 24시간 지난 다음, $380{\sim}400^{\circ}C$에 가열하여 수은을 기화시켜 도금작업을 완성하였다. 금아말감도금은 평균적으로 6~7차례 시행하여야 완벽히 도금되지만, 본 연구에서는 단 4차례의 도금만으로 금아말감도금을 완성시켰는데, 이것은 금아말감을 바탕소지인 청동에 도포한 후 24시간 동안 금아말감과 청동과의 반응 시간을 두게한 것이 큰 역할을 한 것으로 보이며, 이는 청동시편을 이용한 실험과 과학적 분석을 통하여 입증하였다. SEM으로 표면을 관찰한 결과 아말감 도포시간이 즉시인 경우 도금이 거의 되지 않은 것을 확인할 수 있었고 36시간이 넘어갈 경우 금 도금층이 불균일하게 관찰되었으므로 도금시간은 12시간~24시간 이내가 적절함을 확인할 수 있었다. EDS로 성분을 분석한 결과 산처리 시간이 20분인 시료의 경우 5 wt% 내외로 수은의 비율이 다른 시료에 비해 낮은 것을 확인할 수 있었다. 실험 및 분석결과 산처리 시간이 20분이고 아말감 도포시간이 24시간일 때 도금이 잘 이루어지므로 이 결과를 토대로 금동삼존판불을 복원하였다. 이번 연구를 통해 도금법에 표면을 세척하고 부식시키기 위해 사용한 물질이 매실산임을 찾아내어 확인할 수 있었는데, 이러한 점 에서 이 연구의 가장 큰 의미는 전통 소재와 기술을 복원한 것으로, 앞으로 매실산을 이용한 금 도금기술은 관련 학계에도 큰 기여를 할 것으로 기대된다.