So far, the grouting using pressure injection has been extensively used to avoid adverse effects such as soil disturbance. Whereas, the pressure injection to the limitations of the diffusion range, so that the kinks would last injection of cement particles by introducing a frequency oscillation effect improved injection method have been recently developed. In this study, a pilot test was performed to compare injection effects of the both methods. The injections using both methods were tested on the embankment which consists of core clay and weathered soil. Subsequently, the injected volume, SPT N values, in-situ permeability and electrical resistivity were measured to compare their effects. The vibration method showed more effective permeation comparing with the pressure method. Also, it showed more homogeneously improved ground than the existing method. For SPT results, the vibration method presented increase of mean N value as much as 17.4 % comparing with the conventional method. Higher electrical resistivity was presented in case of injecting with vibration method and it indicated the injection was extensively completed. Finally, it is expected that the economic feasibility will be improved by decrease of drilling spacing, when the existing method is replaced with vibration method.
Proceedings of the Korea Water Resources Association Conference
/
2015.05a
/
pp.249-249
/
2015
ASR(Aquifer Storage Recharge) 또는 ASTR(Aquifer Storage Transfer Recharge)과 같은 직접적인 지하수 인공함양기법은 대수층을 활용하여 수자원을 공급하고 관리하기 위한 적극적인 방안으로 고려될 수 있다. 이 중 ASTR 기법은 대규모 충적층이 발달한 강변 또는 하구에서 저류지 수생식물의 정화작용과 층적층의 물리/화학/생물학적 여과 기능을 활용하여 양질의 상수원수를 확보할 수 있는 기법이며, 수질이 나쁜 하천수를 직접 취수하여 정수처리하는 것에 비해 정수비용이 상대적으로 적게 들어 투자대비 경제적인 상수원수 확보기술이라 할 수 있다. 본 연구에서는 하구에 염수 대수층이 위치해 있다고 가정하였으며, 이러한 염수 대수층 내에 담수 주입 변화에 따른 지하 담수체의 거동을 4가지 시나리오에 따라 모의 및 분석을 통해 조사하였다. 염수 대수층 내에서 8개의 주입정과 1개의 양수정이 설치되어 있다고 가정하였으며, 주입정은 동심원 상에 등간격으로 위치해 있으며, 양수정은 동심원 중에 위치해 있다고 가정하였다. 본 연구에서 구성된 시나리오로 첫 번째는 주입정 8개 모두에서 동시에 주입되며, 1개의 양수정을 통해 양수되는 것이며, 두 번째는 7개의 주입정에 주입 그리고 1개의 주입정 폐쇄, 세 번째는 6개 주입정에 주입 및 양수정과 서로 마주보는 2개 주입정 폐쇄, 그리고 마지막으로 6개 주입정에 주입 및 서로 이웃한 2개 주입정 폐쇄이다.
Lee, Jong Won;Kim, Hyung Mok;Yazdani, Mahmoud;Park, Eui-Seob
Tunnel and Underground Space
/
v.27
no.5
/
pp.324-332
/
2017
In this paper, a numerical analysis of one-dimensional viscous fluid flow in a rock joint using UDEC code is performed to evaluate the effect of design parameters on injection performance. We consider injection pressure, fluid compressibility, time dependence of yield strength and viscosity of injected grout fluid, and mechanical deformation of joint as the design parameters, and penetration length and flow rate of injection are investigated as the injection performance. Numerical estimations of penetration length and flow rate were compared to analytical solution and were well comparable with each other. We showed that cumulative injection volume can be over-estimated by 1.2 times than the case that the time-dependent viscosity evolution is not considered. We also carried out a coupled fluid flow and mechanical deformation analysis and demonstrated that injection-induced joint opening may result in the increment of cumulative volume by 4.4 times of that from the flow only analysis in which joint aperture is kept constant.
Proceedings of the Korean Vacuum Society Conference
/
1999.07a
/
pp.184-184
/
1999
반도체소자의 고집적, 미세화에 따라 MOSFET 소자에서의 고농도, 미세접합이 요구되고 있다. 이러한 고농도, 미세접합을 형성하기 위하여 기존의 저에너지 이온주입법을 대체 또는 병행할 목적으로 플라즈마 이온주입방법이 활발히 연구되고 있다. 본 연구에서는 플라즈마 이온주입방법을 이용하여 (100) 실리콘 기판에 보론을 주입후 열처리하여 형성된 p+층의 도펀트의 활성화와 이온주입으로 인한 실리콘 기판의 손상을 고찰하였다. 본 실험에서 (100)실리콘 기판에 도핑할 소스 가스로 BF3을 주입하고, D.C. pulse 플라즈마 도핑시스템을 사용하여 플라즈마 내의 보론이온을 웨이퍼 홀더에 -1~-5kV의 인가된 음전압에 의해 가속시키어 실리콘 웨이퍼에 주입하였다. 주입에너지 -1kV, -3kV, -5kV와 1$\times$1015, 3$\times$1515의 dose로 주입된 실리콘 기판을 급속가열방식(RTP)을 사용하여 $600^{\circ}C$~110$0^{\circ}C$의 온도구간에서 10초와 30초로 열처리하여 도펀트의 활성화와 미세접합을 형성한 후 SIMS, four-point probe, Hall 측정, 그리고 FT-IR을 이용하여 플라즈마 이온주입된 도펀트의 거동과 활성화율을 관찰하였고 FT-IR과 TEM의 분석을 통하여 이온주입으로 인한 실리콘 기판의 손상을 고찰하였다. SIMS, four-point probe, Hall 측정, 그리고 FT-IR의 분석으로 열처리 온도의 증가에 따라 도펀트의 활성화율이 증가하였고, 이온주입 에너지와 dose 그리고 열처리 시간의 증가에 따라서 주입된 도펀트의 활성화는 증가하였다. 그리고 주입에너지와 dose 그리고 열처리 시간의 증가에 따라서 주입된 도펀트의 활성화는 증가하였다. 그리고 주입에너지와 dose를 증가시키면 접합깊이가 증가함을 관찰하였다. 이온주입으로 인한 기판손상의 분석을 광학적 방법인 FT-IR과 미세구조를 분석할 수 있는 TEM을 이용하여 분석하였다. 이온주입으로 인한 dislocation이나 EOR(End Of Range)과 같은 extended defect가 없었고, 이온주입으로 인한 비정질층도 없는 p+층을 얻을수 있었다.
To study the grout flow in jointed rock, various nurser characteristics of grout in a single joint plane and two-dperorbed. The joint plane is described as a channel nets properties of grout are considered. To deal with various prob generator and i oint network generator are used. A loss of head due to friction in laminal flow is adopted to between the grout and joint wall. The grout flow is stopped, setting time. To consider this phenomenon, the idea of maxim From the results of numerical simulation on the single jai etration of grout is confirmed. The basic principles for the ation and the selection of the grout are presented. Correlation ant and grouting pressure is defined by analyzing the effects grout flow. Finally, the grout flow around a tunnel is simulate ins grouting operation for jointed rock mass.
Proceedings of the Korean Vacuum Society Conference
/
1999.07a
/
pp.219-219
/
1999
플라즈마 이온 주입은 진공 chamber 내에 주입하려는 이온이 포함된 플라즈마를 발생시킨 후 처리하고자 하는 시편에 negative high voltage pulse를 인가함으로써 시편 주위에 형성되어 있는 이온들을 시편에 주입하는 방법이다. 이러한 플라즈마 이온 주입 방법은 금속의 내마모성, 내부식성, 강도 및 경도를 증가시키고, 고분자 화합물의 표면 개질에 있어서 친수성 또는 소수성과 같은 표면 처리를 쉽고 간단하게 처리할 수 있다. 그리고 반도체 공정의 shallow junction doping을 효과적으로 처리할 수 있으며 특히, 대면적의 시편에 균일하게 이온을 주입할 수 있다. 플라즈마 이온 주입 방법에서 중요한 요소는 dose, 즉 이온 주입한 양과 처리하려는 시편에 주입되는 이온의 에너지이다. 여기서, 플라즈마내에 생성된 이온들의 비율을 정확히 안다면 시편에 주입되는 이온의 양과 주입되는 이온의 에너지를 충분히 예견할 수 있다. 질소 플라즈마의 경우에는 N+와 N2+가 생성되므로, 시편에 주입된 질소 이온의 실질적인 이온당 질소 원자수는 1$\times$N+% + 2$\times$N+%가 되고, N2+의 경우는 N+ 주입 에너지의 1/2 로 시편내에 주입되게 된다. 또한 질소 플라즈마의 경우 N2+ 이온이 상대적으로 N+이온보다 많다면 N+가 많은 경우보다 이온 주입 깊이는 얕아지게 된다. 본 실험에서는 Dycor M-100 residual gas analyzer와 potical emission spectrometer (Ocean Optics SQ 2000)를 사용하여 압력과 RF power를 변화시키며 플라즈마내에 생성되어지는 질소 이온의 비율을 측정하였다. 또한 Langmuir probe를 이용하여 속도차에 의한 각 이온들의 존재비율을 계산하였다. 여기에서 질소 가스의 압력이 낮을수록 N+보다 N2+의 존재비율이 높음을 보였다. 이것은 압력이 낮은 영역에서 일반적으로 전자의 평균온도가 높기 때문으로 여겨진다.
Journal of the Korea institute for structural maintenance and inspection
/
v.10
no.6
/
pp.191-197
/
2006
This study is to establish a standardization of injection system by inorganic material for crack repair of tunnel concrete structures. For this various surveys and experiments were carried out as followed. The first we surveyed capability of injection and crack pattern of concrete structures in site. and second we analyzed the relationship between crack width and volume of injection, and decided pressure and volume of injection. Finally we evaluated the relationship between crack width and volume of injection with kind of concrete structures, and between required time for injection and crack width with thickness of structure. From these surveys and experiments, we cleared the relationship between crack patterns and injection technologies such as volume, pressure of injection and required time for injection with kind of structure.
Proceedings of the Korean Nuclear Society Conference
/
1997.10a
/
pp.457-462
/
1997
현재 국내외 대부분 원자력발전소(이하 원전)의 안전주입방식은 저온관 주입방식을 채택하고 있으며, 안전주입시 노심의 온도와 압력분포가 주요 관심 대상이었다. 하지만 향후 개발될 원전의 안전주입방식은 저온관주입이 아닌 안전주입의 신뢰성을 한단계 높인 원자로용기 직접주입방식인 DVI(Direct Vessel Injection)방식을 채택하고 있는 추세인데, 이 경우 관심분야는 원자로용기 dowmcomer지역까지 확대된다. 즉 저온의 안전주입수가 고온 고압의 원자로용기 downcomer지역으로 직접 주입됨으로 인해 이 지역의 유체유동과 혼합상태 및 온도분포가 주요관심 대상이 되며 이는 원자로용기의 PTS(Pressurized Thermal Shock)해석에 연결된다. 본 연구에서는 LOCA 사고시 DVI방식을 적응한 안전주입수 유입에 의한 원자로용기 downcomer지역의 유제유동과 유체혼합상태 및 온도분포를 열유체 해석 code인 FLUENT를 이용하여 해석하였다. 해석결과에 의하면 사고시 DVI에 의해 유입되는 약55℉인 저온 안전주입수는 유입과 동시에 넓은 지역으로 퍼지면서 dowmcomer지역의 고온 원자로냉각재와 적절히 혼합되어 하향유로를 따라 흐르며 PTS의 발생 원인인 국부적 유체비혼합 현상이나 온도 급하강현상은 발생하지 않는 것으로 나타났다.
Proceedings of the Korea Water Resources Association Conference
/
2015.05a
/
pp.250-250
/
2015
ASR(Aquifer Storage Recharge) 또는 ASTR(Aquifer Storage Transfer Recharge)과 같은 직접적인 지하수 인공함양기법은 대수층을 활용하여 수자원을 공급하고 관리하기 위한 적극적인 방안으로 고려될 수 있다. 그러나 하천 수와 같은 지표수를 주입할 경우 부유물질 그리고 생물학적 및 화학적 물질 등에 의해 주입정 내 스크린 부분에서 폐색이 발생할 수 있으며, 이로 인해 인공함양 시설의 운영에 있어 부정적인 영향을 미칠 수 있다. 주입정 내 폐색을 저감시키기 위해서는 주기적인 주입정 역세척과 같은 방법이 적용될 수 있다. 본 연구에서는 물리적인 폐색을 발생시키는 부유물질이 포함되어 있는 지표수를 주입할 경우 주입정 내에서의 부유물질의 거동을 수치적 기법을 통해 모의 및 분석을 수행하였다. 본 모의에서는 부유물질을 구성하는 입자들은 세 가지 서로 다른 비중(0.8, 1.3, 1.5)을 가지며, 각각의 경우에 대해 입자분포는 정규분포를 통해 발생시켰다. 비중이 서로 다른 부유입자들은 동시에 주입정 내로 주입된다고 가정하였다. 모의는 비정상상태 조건으로 수행되었으며, 시간에 따라 변화되는 주입정 내 부유물질의 거동에 대해 분석하였다.
In this study, it is performed that mix design of grouting materials which high strength, durability and environmentally safe materials for 2 types of suspension, solution grouting. The laboratory model tests such as permeation, solidification tests are performed to find injection effects by the injection pressure, soil condition. And environmental effects of the grouting materials is analyzed through the heavy-metal leaching tests. From the results, micro cement of suspension grouting superior permeation, solidification injection to Portland cement, and phosphoric acid and sodium hydrogen carbonate in solution grouting were similar to micro cement of suspension grouting. When compare to strength of grouted soils, micro cement of suspension grouting showed high compression strength to Portland cement. While, solution grouting showed very low compression strength comparing suspension grouting. Also, in the heavy-metal leaching tests results were satisfied with the environmental regulation standard for raw grouting materials and grouted soil by 7, 14, 28days curing.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.