• The Transactions of the Korea Information Processing Society
• /
• v.7 no.10
• /
• pp.3226-3235
• /
• 2000

The more complex and larger semiconductor integraed circuits become, the core important delay test becomes which guarantees that semiconductor integrated circuits operate in time. In this paper, we propose a new partial enhanced scan method that can generate test patterns for path delay faults offectively. We implemented a new partial enhanced scan method based on an automatic test pattern generator(ATPG) which uses implication and justification . First. we generate test patterns in the standard scan environment. And if test patterns are not generated regularly in the scan chain, we determine flip-flops which applied enhanced scan flip-flops using the information derived for running an automatic test pattern generator inthe circuti. Determming enhanced scan flip-flops are based on a fault coverage or a hardware overhead. through the expenment for JSCAS 89 benchmark sequential circuits, we compared the fault coverage in the standard scan enviroment and enhance scan environment, partial enhanced scan environment. And we proved the effectiveness of the new partial enhanced scan method by identifying a high fault coverage.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.2
• /
• pp.14-25
• /
• 1999

The IEEE standard 1149.1, which was proposed to increase the observability and the controllability in I/O pins, makes it possible the board level testing. In the boundary-scan environments, many shift operations are required due to their serial nature. This increases the test application time and the test application costs. To reduce the test application time, the method based on the parallel opereational multiple scan paths was proposed, but this requires the additional I/O pins and the internal wires. Moreover, it is difficult to make the designs in conformity to the IEEE standard 1149.1 since the standard does not support the parallel operation of data shifts on the scan paths. In this paper, the multiple scan path access algorithm which controls two scan paths simultaneously with one test bus is proposed. Based on the new algorithm, the new algorithm, the new board level BIST architecture which has a relatively small area overhead is developed. The new BIST architecture can reduce the test application time since it can shift the test patterns and the test responses of two scan paths at a time. In addition, it can reduce the costs for the test pattern generation and the test response analysis.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.213.1-213.1
• /
• 2005

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.369-379
• /
• 2011

During the routing process between nodes on the CR(Cognitive Radio) network conducting for efficient use of limited frequency resources, spectrum handover process due to the appearance of the PU occupies most of the routing latency, and also decreases the reliability of the path. In this paper, a cooperative routing protocol in a multi-channel environment is proposed. The source node broadcasts a message with available channel lists and probability of PU appearance during its route guidance. The intermediate nodes re-transmit the message, received from the source node, and update and maintain the information, status table of the path. The destination node determines the optimal path and sends a reply message to the selected path after it receives the messages from the intermediate nodes. The average probability of the PU appearance and the average time of the PU appearance are updated while transferring data. During data transmission the channel with the lowest probability of appearance of the PU is selected dynamically and if a PU appears on the current channel partial repairment is performed. It is examined that reliability of the selected path considerably is improved and the routing cost is reduced significantly compared to traditional routing methods.

• Science of Emotion and Sensibility
• /
• v.17 no.2
• /
• pp.111-122
• /
• 2014

This study has analyzed the scanning path algorithm shown at the process of exploring spatial information through an observation experiment with the object of lobby in subway station. In the estimation of observation time by section, the frequency of scanning type was found to increase as the observation time got longer, which makes it possible that the longer the observation lasts the more the observation interruptions occur. In addition, the observation slipped out of the range of imaging when any fatigue was caused from the observation or the more active exploration took place. Furthermore, when the trend line was employed for the examination of the changes to the scanning type by time section, "concentration" "diagonal or vertical" showed a sharp and a gentle increases along with the increase of time section respectively, while "circulation. combination, horizontal" showed a reduction. The observation data of the subjects observing a space include various visual information. The analysis of the scanning type found at "attention concentration" enabled to draw this significant conclusion. The features of increase and decrease of scanning types can be a fundamental data for understanding the scanning tendency by time.

• Korean Journal of Optics and Photonics
• /
• v.19 no.2
• /
• pp.132-139
• /
• 2008

In scanning laser optical tweezers, high speed scanning stages are used to manipulate a laser beam spot. Due to the inertia of the stage, the output scanning signal decreases with increased frequency of the input signal. This discrepancy in the signals is difficult to observe since most of the energy from the laser beam is blocked out to avoid CCD damage. In this paper, we propose two methods to alleviate these problems. Firstly, frequency responses of piezo stages are measured to analyze the signal drops and the input signal is compensated accordingly. Secondly, an overlay of the scanning path is drawn on the live monitoring screen to enhance the visibility of the scanning path. The result is a drop-compensated scanning with clear path view.

• Korean Journal of Health Education and Promotion
• /
• v.5 no.1
• /
• pp.1-5
• /
• 1988

AIDS란 성적 접촉에 의하여 사람에서 사람에게로 전염되었거나 금지된 마약이나 각성제등의 정맥주사에 쓰이는 주사기나 주사침을 공용하여 전염되는 것이 주인 감염경로에 의하여 일어나는 일련의 병의 최종적인 상태를 말한다. 1981년6월5일자 MMWR지에 실린 미국 로스엔젤레스지역 5명의 남성동성애자에 발생된 카리니폐염의 보고가 첫 보고증예이나, 이보다 앞선 2년반사이에 미국의 뉴욕주와 캘리포니아주에서 남성동성애자에서 카포시육종이나 카리니폐염환자가 발생되었었음이 알려져 이 병이 주목받게 되었다.

• Proceedings of the KSAR Conference
• /
• 2004.06a
• /
• pp.219-219
• /
• 2004

Human erythropoietin (hEPO) 유전자가 도입된 형질전환돼지는 수태와 임신율을 일반돼지와 비교를 해 보았을 때 매우 낮은 경향을 보이는 것으로 나타났으며, 이러한 경향의 원인을 구명하기 위하여 인위적인 발정동기화 및 호르몬을 이용한 과배란 유기시 배란과 수정(수태)시 성호르몬 변화를 비교하고자 실시하였다. 먼저 발정동기화를 위하여 PG 600 (PMSG 400 IU, HCG 200IU)을 주사한 후 10일 후에 Regumate porcine을 6일간 급여한 후에 PMSG 주사하고 2일 후에 hCG 주사한 다음 인공수정을 실시하였다. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1295-1298
• /
• 2004

Selective Laser Sintering(SLS) method is one of Rapid Prototyping(RP) technologies. It is used to fabricate desirable part to sinter powder and stack the fabricated layer. To develop this SLS machine, it needs effective scanning path and the development of scanning device. This paper shows how to make fast scanning path with respect to scan spacing, laser beam size and scanning direction from 2-dimensional sliced file generated in commercial CAD/CAM software. Also, we develop the scanning device and its control algorithm to precisely follow the generated scanning path. Scanning path affects precision and total machining time of the final fabricated part. Sintering occurs using infrared laser which has high thermal energy. As a result, shrinkage and curling of the fabricated part occurs according to thermal distribution. Therefore, fast scanning path generation is needed to eliminate the factors of quality deterioration. It highly affects machining efficiency and prevents shrinkage and curling by relatively lessening the thermal distribution of the surface of sintering layer. To generate this fast scanning path, adaptive path generation is needed with respect to the shape of each layer, and not simply x, y scanning, but the scanning of arbitrary direction must be enabled. This paper addresses path generation method to focus on fast scanning, and development of scanning system and control algorithm to precisely follow generated path.

• RED RIBBON
• /
• s.43
• /
• pp.28-29
• /
• 2001

실제 감염인은 2명 이상임을 의미하고 마약사용자들간에도 상당수의 감염인이 있을 수 있음을 의미한다. 이는 과거에 비해 에이즈가 전파될 수 있는 감염경로는 훨씬 다양해졌음을 의미한다. 즉 마약사용 주사기뿐만 아니라 인터넷을 통한 번개섹스, 청소년 매매춘(원조교제), 노래방, 증기탕 등을 통한 주부매춘, 노인 매매춘 등으로 감염경로가 넓어졌다.