• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.337-343
• /
• 2006

The purpose of this study was to estimate the relation between techniques used for microleakage from dye penetration and for marginal adaptation from SEM evaluation of the restoration. Using high speed #330 bur class V cavities ($4{\times}3{\times}1.5 mm$ around CEJ) were prepared on the buccal surface of 20 extracted human molars. Six dimples as reference points for SEM and dye penetration evaluation were made with 1/2 round bur. Cavity was bulk filled with microhybrid composite resin (Esthet X) and all-in-one adhesive (Xeno III). Teeth were stored in saline solution for one day, after then, they were finished and polished using Sof-Lex system. Fifty percent silver nitrate dye solution was used for the evaluation of microleakage and resin replica was used for marginal adaptation. All of these were done after 1000 times thermocycling between 5 and $55^{\circ}C$. Vertical sections were made through three dimples of restoration to obtain samples for the evaluation of dye penetration and inner marginal adaptation. Outer adaptational estimation was done with an intact restoration before sectioning. Dye penetration was determined in three degrees and percentage of outer and inner leaky margin was estimated from SEM image The data were analysed statistically: Spearman's rho test were used to check relationships between two methods. The result were as follows : 1. There were significant relationships between degree of dye penetration and inner and outer marginal adaptations each (p < 0.01). 2. However, there was no significant relationship between the results or inner and outer marginal adaptation. Within the results of this study, relationship between the percentage of marginal adaptation and microleakage shows significant relationship. However, inner and outer marginal adaptation did not show any significant relationship mutually.

• Journal of Life Science
• /
• v.17 no.5 s.85
• /
• pp.658-663
• /
• 2007

Bacillus thuringiensis is a well-known species of entomophathogenic bacteria that is widely used as a biopesticide against many insect pests. It produces parasporal crystals ($\delta$-endotoxin) and endospores during sporulation. In this report, the $\delta$-endotoxin produced by Bacillus thuringiensis BT-1 and BT-2 were characterized by Scanning Electron Microscope(SEM), Transmission Electron Microscope(TEM), SDS-PACE, and solubilization activity by alkaline solution. BT-1, BT-2 were cultured in the GBY medium, and the $\delta$-endotoxin of them was purified with discontinuous sucrose density gradient centrifugation. Their $\delta$-endotoxin was observed by SEM and TEM. Morphologically, the $\delta$-endotoxin of BT-1 was a square and flat type, whose size was $1.73{\mu}m{\times}0.7{\mu}m$, and the $\delta$-endotoxin of the BT-2 was spherical form whose size was $1.1{\mu}m{\times}0.9{\mu}m$ determined by SEM and TEM. The $\delta$-endotoxin of the BT-1 was composed of 28 kDa and 21 kDa, however, it of the BT-2 was composed of 50 kDa, 35 kDa, and 22 kDa bands determined by SDS-PACE. The purified crystals of BT-1 and BT-2 were dissolved gradually in alkaline solution as time goes by, and it was perfectly dissolved after 3 hours. It is supposed that the $\delta$-endotoxin of crystal was converted to a state of activation in the course of time in the intestines of insect.

• Korean Journal of Plant Taxonomy
• /
• v.36 no.1
• /
• pp.1-19
• /
• 2006

Description of spore morphology of Korean Polypodiaceae has on LM and SEM and key to the genera are provided. Korean Polypodiaceae monad, monolete with bilateral symmetry, bipolar and oblete spore except for Loxogramme grammitoides having trilete spore with radial symmetry. In spore wall structure, exopore showed variable patterns enough to distinguish genera. Perispore was found in all the species examined. The patternof perispore and exospore was most similar in all the species examined except Crypsinus, Pyrrosia hastata ans P. linearifolia. The perispores of Crypsinus, Pyrrosia hastata and P. linearifolia were echinate and gemmate, rugulate, and verrucate respectively. In term of exospore wall sculpturing, Polypodium and Loxogramme showed fossulate, Lepisorus, rugulate with irregular verrucate, Crypsinus ans Coloysis showed psilate or rarely verrucate in the latter, Neocheiropteris ensata showed dense small verrucate, Lemmaphyllum microphyllum showed complex reticulate and Pyrrosia showed verrucate or psilate.

• Research in Plant Disease
• /
• v.14 no.3
• /
• pp.214-218
• /
• 2008

Coleosporium neocacaliae, a needle rust fungus, was described and illustrated for the first time on the needles of Pinus koraiensis (Korean pine) in Korea. Detailed descriptions of the species were verified based on symptoms and signs, and light and scanning electron microscopic observations on aecia, aeciospores and peridial cells. The present needle rust fungus was apparently different from C. eupatorii, a solely recorded Coleosporium species on P. Koraiensis in Korea until this time, in having comparatively large sized aeciospores as $20-39{\times}14-27\;{\mu}m$ than those of latter species (size of aeciospores $15-27{\times}10-20\;{\mu}m$). Verrucose surface structure of aeciospores in light microscopy was revealed to be annulated with three to four rings and root-like base in scanning electron microscopy. Aecial stage of C. neocacaliae were formed on the middle days of April to the early days of June and collected around the central parts of Korean peninsula, including high mountains of about 1,000 m above sea level.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.327-330
• /
• 2000

The scanning Maxwell-stress microscopy (SMM) is a dynamic noncontact electric force microscopy that allows simultaneous access to the electrical properties of molecular system such as surface potential, surface charge, dielectric constant and conductivity along with the topography. The Scanning near-field optical / atomic force microscopy (SNOAM) is a new tool for surface imaging which was introduced as one application of the atomic force microscope (AFM). Operated with non-contact forces between the optical fiber and sample as well as equipped with the piezoscanners, the instrument reports on surface topology without damaging or modifying the surface for measuring of optical characteristic in the films. We report our recent results of its application to nanoscopic study of domain structures and electrical functionality in organic thin films by SMM. Furthermore, we have illustrated the SNOAM image in obtaining the merocyanine dye films as well as the optical image.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.9
• /
• pp.55-62
• /
• 2003

This paper investigates the micro-cutting of cemented carbides using PCD (polycrystalline diamond) and PCBN (polycrystalline cubic boron nitride) cutting tools are performed with SEM direct observation method. The purpose of this study is to make clear the cutting mechanism of cemented carbides and the fracture of WC particles at the plastic deformation zone in orthogonal micro-cutting. And also to achieve systematic understanding, the effect of machining parameter on chip formation and machined surface was studied, including cutting speed, depth of cut and various tool rake angle. Summary of the results are shown below. (1) Three type of chip formation process have been proposed by the results of the direct observation in orthogonal micro-cutting of cemented carbide materials. (2) From the whole observation of chip formation, primary WC particles are crushed and/or fine grained in the shearing deformation zone. A part of them are observed to collide directly with a cutting edge of tool by following the micro-cutting. (3) Surface finish, surface morphology and surface integrity is good to obtain by cutting with PCD cutting tool compared with PCBN. (4) The machined surface has the best quality near the low cutting speed of 10${\mu}m$/sec with a cutting depth of 10 ${\mu}m$ using 0$^\circ$ rake angle and 3$^\circ$ flank angle in this condition, but it was found that excessively low speed, for example the extent of 1 ${\mu}m$/sec, is not good enough to select for various reason.

• Journal of the Korean Vacuum Society
• /
• v.22 no.6
• /
• pp.285-290
• /
• 2013

Epitaxial graphene on metal substrates provides excellent platforms to study its atomic and electronic structures, and can be grown either by surface segregation of carbon or by chemical vapor deposition. The growth behaviors of the two methods, however, have not been directly compared each other. Here, we studied domain structures of graphene grown by three different methods, surface segregation, post-annealing with adsorbed ethylene, and high-temperature dose of ethylene, using scanning tunneling microscopy. The first two methods resulted in graphene regions with areas of $100nm^2$, whereas the third method showed large area graphene (> $10^4nm^2$) with regular hexagonal Moire patterns, implying that high-temperature dose of ethylene is preferable for further studies on graphene such as additional growth of organic molecules.

• Journal of Periodontal and Implant Science
• /
• v.27 no.4
• /
• pp.723-737
• /
• 1997

본 연구의 목적은 조직유도재생술의 초기치유시에 구강양치액으로 사용되어지는 0.1% 클로르헥시딘과 0.2% 클로르헥시딘을 사용했을 경우, 양치액을 사용하지 않았을 경우의 세균감염 정도를 비교하는 것이다. 30명의 성인형 치주염에 이환되어진 사람을 대상으로 하였다. 초기치료(Scaling/Root planing/Oral hygiene instruction)를 시행한 후에 한 사람에 한 군데씩 선정하여 2급이나 3급의 치근이개부를 가지고 임상적으로 혹은 방사선학적으로 치간골내낭을 보이지 않는 치아에 통법에 따라 Gore-TexTM를 위치시켰다. 술후 5일간 항생제 (UnasynTM 375mg tablet p.o.tid)를 투여하고 차폐막을 제거할 때까지(4주 혹은 6주) 10명의 환자에게는 0.1% 클로르헥시딘을, 다른 10명의 환자에게는 0.2% 클로르헥시딘으로 구강양치를 하게 하고, 또 다른 10명의 환자에게는 구강양치액을 사용하지 않도록 하였다. 또 1주일에 한번씩 전문가구강위생술식을 실시하였다. 4주나 6주 후에 차폐막을 제거하고 주사전자현미경, 혐기성 세균배양을 이용하여 세균감염정도를 비교하였다. 1. 주사전자현미경으로 관찰시에 0.1% 클로르헥시딘을 사용했을 경우와 0.2% 클로르헥시딘을 사용했을 경우, 클로르헥시딘을 사용하지 않은 경우에 별 차이를 발견할 수 없었다. 2. 혐기성 세균배양시에 0.2% 클로르헥시딘을 사용했을 경우, 0.1%클로르헥시딘을 사용했을 경우보다 적은 수의 세균 수를 보였으나 통계적으로 유의할 만한 차이는 보이지 않았다. 클로르헥시딘을 사용하지 않은 경우에는 다른 두 경우에 비해 통계적으로 유의할 만한 차이를 보였다.(P<0.05) 3. Actinobacillus actinomycetemcomitans, Porphyromonas gingivalis, Prevotella intermedia를 인지한 경우에는 세 경우 모두 비슷한 비율로 발견되었다.

• Korean Journal of Plant Taxonomy
• /
• v.45 no.4
• /
• pp.323-331
• /
• 2015

Pollen morphological characteristics of 7 taxa of the genus Aruncus L. (Rosaceae) were examined using scanning electron microscopy (SEM) to evaluate the taxonomic implication within the genus. Aruncus pollen grains were monad, tri-colporate with granular membranes, small in size ($P=8.33-12.57{\mu}m$, $E=8.93-14.40{\mu}m$), amb is sub-circular to circular, suboblate to prolate-spheroidal in shape (P/E = 0.68-1.70). The sexine ornamentation in all studied taxa was basically striate but existence of perforation (striate-perforate: A. dioicus, A. dioicus var. acuminatus, A. dioicus var. astilboides, A. dioicus var. pubescens, A. dioicus var. vulgaris; striate-pstilate: A. dioicus var. aethusifolius, A. gombalanus) and the widths of muri and grooves varied according to the taxa. In particular, relatively short, and sharply crested muri being a distinct feature of A. dioicus var. acuminatus. As a result, the various combination of each pollen characteristics could be useful to identify the some taxa of the genus Aruncus.

• Korean Journal of Plant Taxonomy
• /
• v.34 no.4
• /
• pp.273-285
• /
• 2004

A comparative micromorphology of petal and sepal of 15 species of Lycopus was undertaken to assess their usefulness in species identification and to evaluate their significance in the taxonomy using scanning electron microscope and stereo microscope. Five types of trichome are found within the genus: unicellular cylindrical trichome, unicellular trichome with papillae, simple multicellular trichome, capitate glandular trichome, and peltate glandular trichome. The types, distribution, and density of the trichomes show considerable variation among the taxa. The distributional pattern of the unicellular cylindrical trichomes on inner side of corolla is differed among the investigated taxa, and can be classified into four patterns. The apex shape of sepal and the incised position of calyx are also various and be recognizedas four patterns. The shape of cell composing in both outer and inner sides of petal and sepal are shown variously. Finally, the taxonomic significance of micromorphology of the petal and sepal in identification and elucidation of the genus Lycopus, especially among the species is also briefly discussed.