• Polymer(Korea)
• /
• v.26 no.1
• /
• pp.128-138
• /
• 2002

1,3-Bis(2-chloroethyl)-1-nitrosourea (BCNU, Carmustine)-loaded poly(D, L-lactide-co-glycolide) (PLGA, lactide/glycolide mole ratio 75 : 25) microparticles were prepared and fabricated into wafers in an attempt to study the possibility for the treatment of malignant glioma by direct inserting the wafers to the tumor or the cavity remained after surgical resection of the tumor. SEM observation of the microparticles prepared by spray drying method revealed that the microparticles were spherical, i. e. microspheres. Significant reduction of the crystallinity of BCNU encapsulated in PLGA was confirmed by X-ray diffraction and differential scanning calorimetry analyses of the BCNU-loaded PLGA microparticles. Release pattern of BCNU was dependent on several preparation parameters, such as the molecular weight and concentration of PLGA, and initial BCNU loading amount, etc. In vitro release of BCNU was prolonged over 8 weeks with close to zero-order release pattern after initial burst effect. Observations of morphological change of wafers and pH change of release media during release test period confirmed that hydration and degradation of PLGA would be facilitated with an increase of BCNU-loading amount.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.2
• /
• pp.93-102
• /
• 1995

A series of test was performed by measuring the failure strength and the failure mode of fiber reinforced composite laminates joint containing two holes in Series or Parallel. $[0^{\circ}/45^{\circ}/90^{\circ}/-45^{\circ}]_s$ laminate with W/d(Side distance ratio) 4.0 and E/d(Edge distance ratio) 3.0 has the full bearing strength and are preferable in case of the good efficiency in two series hole. Comparisons were made between testing results and predicting values of the FEM model. Good agreements were fecund between them except the case of $E/d=2{\sim}3$. In the case of $G_h{\geq}3.0d$ and $G_v{\geq}3.0d$ since the interaction coefficients between two parallel holes and between two series holes were small, holes can be treated as independent. The Acoustic Emission(AE) and SEM method were utilized to find out the initial defects, damage and the fracture mechanism.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.536-545
• /
• 1997

The purposes of this study were to evaluate the degree of cavity cleanliness and to observe cavity wall morphology when root-end retrograde cavity preparation was done with ultrasonics. Root resections were done on 20 extracted human maxillary central incisors after canal filling with gutta-percha, and retrocavities were prepared using a slow-speed round bur as a control, and stainless steel ultrasonic tips of power settings of 2 and 6 ($Miniendo^{TM}$, EIE, SA, USA) as experimentals. The degree of the remaining cavity debris and smear layer, and wall morphology were evaluated under the scanning electron microscope. The results were as follows : Cavity prepared with ultrasonics of either power setting showed significantly less smear layer than did slow-speed preparations (p<0.01). However, there was no significant difference in canal debris (p<0.05). Cavity prepared with ultrasonics showed hatcheted appearance of wall, while slow-speed preparation showed relatively plain one.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.145-145
• /
• 2016

해양환경용 구조물은 극심한 부식 환경에 노출되어 있고 부식손상으로 인한 직간접적 경제적 손실이 발생하고 있는 상황이다. 이에 대한 방식대책으로써 음극방식법이 선박, 교량, 각종 화학장비에 널리 이용되고 있으며, 이러한 산업분야에 가장 흔히 적용되고 있는 음극방식 중 하나가 피방식체에 일정 전류 또는 음극 전위를 인가하는 외부전원법이다. 이는 전도성 부식환경인 해수환경 하에서 철강 및 해양환경용 구조 재료의 내식성을 월등히 향상시킬 수 있기 때문에 설계에 있어서 고급 내식재료 대신 경제적인 상용 재료를 적용할 수 있어 비용 절감효과를 가질 수 있다. 한편 적정 방식전위에서는 부식손상으로부터 강재를 보호하지만, 과방식 전위에서는 취성이 발생함으로써 내구성 감소의 역효과가 나타날 수도 있기 때문에 최적 방식전위의 규명은 반드시 필요하다. 따라서, 본 연구에서는 S355ML강에 대하여 천연해수 용액에서 다양한 정전위를 조건으로 전기화학실험을 실시하여 최적 방식전위를 규명하고자 하였다. 시험편은 에머리 페이퍼로 2000번까지 연마하였고, 아세톤과 증류수로 세척하여 실험하였다. 전기화학(정전위) 실험은 천연해수 속에서 $1.28cm^2$의 면적만을 노출시켜 진행하였으며, OCP로부터 -2.0V까지의 음극분극 곡선을 분석하여 정전위 조건들을 선정하였다. 그리고 외부 직류전원장치를 이용하여 1,200초 동안 다양한 정전위를 인가하였으며, 기준전극은 Ag/AgCl 전극을 이용하였다. 실험 후에는 주사전자현미경과 3D 현미경을 통해 시험편 표면을 관찰하였으며, 그 결과 일부 음극분극 구간에서 강재 표면에 전착물에 의한 뷸균일한 피막이 형성되었다. 또한, 일정 전위구간에서 용해 및 과전압에 대하여 표면손상 정도를 관찰하여, 해수환경 하에서 S355ML강의 최적 방식전위를 규명하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.109-109
• /
• 2016

철을 보호하는 코팅막에 있어서 현재는 우수한 희생방식성을 가지는 아연(Zn)이 많은 분야에서 활용되고 있지만 성능 향상을 위해서는 코팅막의 두께 증가가 필연적이다. 동일한 두께 혹은 그 이하에서 더 나은 내식성을 가지는 코팅막을 개발하는 목적으로 알루미늄(Al)과 마그네슘(Mg)을 이용한 코팅막의 개발을 진행하고 있으며 이 발표에서는 Al과 Mg의 코팅막을 다층으로 제작하여 이전 실험의 Al-Mg 코팅 강판과 비교 하였을 때 어떠한 특성이 나타나는지를 확인하였다. Al-Mg 코팅층은 99.999%의 Al, 99.99%의 Mg target을 사용하여 스퍼터링을 이용하여 냉연강판 위에 코팅하였다. 증발물질과 기판과의 거리는 7cm 이며, 기판은 세척을 실시한 후 클리닝 챔버에 장착하고 ${\sim}10^{-5}Torr$ 까지 진공배기를 실시하였다. 클리닝 챔버가 기본 압력까지 배기되면 아르곤 가스를 주입하고 기판홀더에 -800 V의 직류 전압을 인가하여 약 30분간 글로우 방전 청정을 실시하였다. 기판의 청정이 끝나면 아르곤 가스를 차단하고 코팅 챔버로 시편을 이송 후 코팅층 성분의 구성형태에 따라 Al과 Mg을 코팅하였다. Al-Mg 코팅층은 $5{\mu}m$의 두께를 기준으로 계면의 코팅층이 각각 Al과 Mg이며 다층으로 구성된 코팅층을 제작하였다. 그리고 후속 공정으로 질소 분위기 $400^{\circ}C$에서 10분간 열처리를 하였다. Al-Mg 코팅층을 주사전자현미경(SEM)으로 관찰한 결과, 표면에서는 Al 또는 Mg의 결정성 구조를 보였으며 단면에서는 다층의 경계를 조금이지만 확인할 수 있었으며 글로우방전분광기(GDLS)를 통해 열처리 후에는 층의 구분이 모호해 지는 것을 확인 할 수 있었다. 그리고 XRD를 통하여 열처리 후 Al-Mg 합금상의 생성도 확인하였다. 또한 Al-Mg가 다층으로 코팅된 강판을 염수분무시험을 통해서 내부식 특성을 확인하였다. Al-Mg 코팅 강판의 염수분무시험 결과, 모든 제작된 코팅층에서 열처리 전 보다 열처리 후 3배 이상의 내식성의 향상효과를 확인할 수 있었다. 이러한 결과로부터 열처리에 의한 합금상 생성 그리고 Al-Mg 박막의 미세구조 변화가 강판의 내식성에 영향을 미치고 있다는 것을 확인할 수 있었지만 다층 제작이 미치는 영향에 대해서는 좀 더 연구가 필요한 것으로 판단된다.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.1
• /
• pp.19-28
• /
• 2011

This paper presents the results of an investigation into the effect of cyclic freezing-thawing on the compressive strength characteristics of decomposed granite soils. A plane strain compression (PSC) tests were performed on a series of test specimens with different freezing-thawing cycles and fine contents to investigate the change in compressive strength under the process of freezing-thawing cycles. Also performed were scanning electron microscope (SEM) tests to investigate the change in structural rearrangement from a micro-scale point of view. The test results showed that the soil particles tend to conglomerate when subject to cycles of freezing and thawing, and that the soil with less fines exhibited decreased shear strength due to the cyclic freezing-thawing while the soils with a larger fine content showed the opposite trend.

• Polymer(Korea)
• /
• v.27 no.1
• /
• pp.33-39
• /
• 2003

In this study, the bisphenol-based DGEBA/GEBS blend systems were studied in cure kinetics, thermal stabilities, and fracture toughness of the casting specimen. The content of DGEBA/DCEBS was varied in 100 : 0, 90 : 10, 80 : 20, 70 : 30, and 60 : 40 wt%. The cure activation energies ($E_a$) of the blend systems were determined by Ozawa's equation. The thermal stabilities, including initial decomposed temperature (IDT), temperatures of maximum rate of degradation ($T_{max}$), and integral procedural decomposition temperature (IPDT) of the cured specimen were investigated by thermogravimetric analysis (TGA). For the mechanical interfacial properties of the specimens, the critical stress intensity factor ($K_{IC}$) test was performed and their fractured surfaces were examined by using a scanning electron microscope (SEM). As a result, $E_a$, IPDT, and $K_{IC}$ show maximum values in the 20 wt% DGEBS content compared with the neat DGEBA resins. This was probably due to the fact that the elevated networks were farmed by the introduction of sulfonyl groups of the DCEBS resin.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.1
• /
• pp.36-40
• /
• 2006

This study was carried out to investigate histological characteristics of Korean ginseng in steaming process. The Korean red ginseng were prerared with 6-years-old ginseng according to the steaming prcess and dried with $13{\pm}0.5%$ moisture and than cut in vertical section and horizontal section. The tissues are separated into epidermis, cortex, and xylem observed with Scanning Electron Microscope. The materials dried without steaming process contain cell membrane and crystallization of starch particle within them. But Korean red ginseng with prolonged steaming process are condensed, and the large hollows and cell membranes of vessel and resin duct are disappeared. In addition, Ca-oxalate rosette crystal is not found in the case of above 60-minute steaming time. The reason is that the tissues are condensed because of dry after elements' gelatinization.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.3
• /
• pp.175-180
• /
• 2000

Cotyledonary somatic embryos after being cultured in a liquid MS medium for 1 week were subcultured on a solid MS medium and then the embryos germinated at a rate of 92%, but the rate was lowered by extending the culture period of the embryos on a liquid medium: 26% germination on a liquid medium culture for 4 weeks. Somatic embryos subcultured on the liquid medium showed the normal elongation of hypocotyl and radicle but in part showed secondary embryogenesis on hypocotyl and callus formation on and around the root-hypocotyl juncture. Through observation of scanning electron microscope, apical meristem in plumule showed the loose arrangement of cells, and abnormal leaf primordium formation and growth arrest of the primordium or no leaf primordium formation. Therefore, it is suggested that the germination arrest of carrot somatic embryos on liquid medium culture is due to the structural abnormality of the apical meristem in plumule.

• Applied Microscopy
• /
• v.35 no.3
• /
• pp.153-163
• /
• 2005

This experiment was performed to evaluate the morphological responses of the gastric chief cells of the mouse, inoculated with Ehrlich carcinoma cells in the inguinal area, following administration of BCG (Bacillus Calmette-Guerin). Healthy adult ICR mice weighing 25 gm each were divided into normal and experimental groups (experimental control group and BCG treated group). In the experimental groups, each mouse was inoculated with $1x10^7$ Ehrlich carcinoma cells subcutaneously in the inguinal area. From next day after inoculations, 0.2 mL of saline or BCG (0.5 mL/25 g B.W.: $0.03{\times}10^8{\sim}0.32{\times}10^8$ CFU) were injected subcutaneously to the animals every other day, respectively. The day following the last injection, each mouse was sacrificed. Pieces of the tissue were taken from the stomach, prefixed with 2.5% glutaraldehyde-1.5% paraformaldehyde solution, followed by post-fixation with 1% osmium tetroxide solution. The ultrathin sections were stained with uranyl acetate and lead citrate. The size of zymogen granule and the size of the mitochondrion of the gastric chief cells were observed and calculated. In the BCG treated group, most chief cells did not show any difference in ultrastructure, except that myelin figures were more frequently observed, in comparison with that of nornmal control group. The size of zymogen granule in the gastric chief cells of normal control, experimental control and BCG-treated groups were $0.98({\pm}0.108){\mu}m,\;1.05({\pm}0.092){\mu}m\;and\;0.93({\pm}0.053){\mu}m$, respectively. And the mitochondrial size of the gastric chief cells of normal control, experimental control and BCG-treated groups were $0.80({\pm}0.130){\mu}m,\;0.83({\pm}0.143){\mu}m\;and\;0.72({\pm}0.078){\mu}m$, respectively. From the above results, it was concluded that BCG may slightly suppress function of the gastric chief cells.