• Title/Summary/Keyword: 주사식 전자 현미경

Search Result 142, Processing Time 0.03 seconds

전자빔을 이용한 미세형상 패턴성형용 S/W의 개발

  • 강재훈;송준엽;이승우;박화영
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2004.05a
    • /
    • pp.243-243
    • /
    • 2004
  • 상용화된 주사식 전자현미경(SEM)을 기본 구조로 하는 가공 시스템을 구축하여 전자빔(Electron beam)을 이용한 초미세 패턴(Nano pattern) 등 형상의 직접 성형, 혹은 직접 묘화(Direct writing) 가공을 수행하기 위해서는 크게 분류하여 연속적으로 스캐닝되는 전자빔을 요구에 따라 적절하게 극히 짧은 시간 내에 개폐하는 빔 블랭커(Beam blanker)와 효율적으로 초미세 패턴 등의 형상을 설계ㆍ가공하기 위한 전용 S/W의 두 가지 요소가 반드시 적용되어야 한다.(중략)

  • PDF

The Gustatory Sense Organs in the Mouthparts of the Adult Green Leafhopper (Cicadella viridis L.) (말매미충 (Cicadella viridis L.) 구기내의 미각감각기)

  • 이비파;한성식;이문홍;최귀문
    • Korean journal of applied entomology
    • /
    • v.29 no.3
    • /
    • pp.201-208
    • /
    • 1990
  • The gustatory sense organs in the mouthparts of th adult Green Leafhopper (Cicadella viridis L.) were observed by scanning electron microscope. The gustatory sensilla were composed of ten D-sensilla on the precibarim, eight P-sensilla on the wall of both side of eipharyngeal basin, and two H-sensilla in the food canal of the hypopharynx. D- and P-sensilla were again subdivided into 2 subtypes as two types by their morphology. Beneath the cuticle of epipharynx, two paris of nerve bundles were seen originating from D- and P-sensilla, respectively. And a pair of nerve bundles from H-sensilla, beneath the cuticle of hypoharynx, was observed.

  • PDF

THE EFFECTS OF SALIVARY CONTAMINATION OF ACID-ETCHED ENAMEL ON BRACKET BOND STRENGTH (산부식 후 타액오염이 교정용 접착제의 결합강도에 미치는 영향)

  • Kim, Hyun-Deog;Kim, Jong-Sung;Kim, Jong-Ghee
    • The korean journal of orthodontics
    • /
    • v.26 no.3
    • /
    • pp.309-316
    • /
    • 1996
  • The purpose of this study was to determine the effect of salivary contamination of etched enamel on shear bond strength of a bracket adhered to etched enamel. Eighty extracted human permanent premolars were used in this study. These samples were divided into two groups. Buccal surface of samples were etched in vitro with 38% phosphoric acid for 15 seconds and 60 seconds. Each group was divided into four subgroups. Etched enamel surfaces were contaminated with saliva for 0, 1, 20, 60 seconds, washed and dried. Test surfaces were examined using scanning electron microscope(SEM). The shear bond strength of each sample was determined with a universal testing instrument(Instron Co. Model 4201). Results were as follows; 1. Salivary contamination for 1, 20, 60 seconds did not affect shear bond strength when compared with the uncontaminated enamel group. 2 There was no significant difference(P>.05) in shear bond strength between 15 sec. and 60 sec. etching in uncontaminated enamel groups. 3. When samples were examined using SEM, organic materials coated enamel surface masked the etched pattern partially.

  • PDF

SEM Study on the Anaerobic Bacterial Adhesion to the Dentin of Root Canal (혐기성 미생물의 근관내 상아질 부착에 대한 주사전자현미경적 연구)

  • Sung-Eun Yang;Kwang-Shik Bae
    • Restorative Dentistry and Endodontics
    • /
    • v.26 no.4
    • /
    • pp.350-359
    • /
    • 2001
  • 목적 - 근관형성시 근관내 상아질벽에는 항상 도말층(smear layer)이 형성되는데, 이는 상아질, 치수조직 잔사, 조상아세포 돌기, 때로는 미생물 등으로 구성되며, 주사전자현미경상으로는 비규칙적이며, 무정형의 구상(granular)구조물로 관찰된다. 본 연구에서는 도말층의 유무에 따른 혐기성 미생물, Prevotella nigrescens의 근관내 상아질 부착정도를 주사전자현미경으로 평가하고자 한다. 지금까지 사용되었던 실험방법에 비하여 보다 임상적 환경에 가까운 실험방법을 고안, 신빙성 있는 연구결과를 기대할 수 있도록 하였다. 방법 - 치주질환이나 외상 등의 원인으로 발거된 상, 하악 전치 18개를 사용하였다. 각 치아의 치관부를 백악법랑경계부위에서 절단하고, 1군(5개치아)은 10ml의 생리식 염수를, 2군(5개치아)과 3군(5개치아)은 10ml의 3.5% NaOCl을 근관관주용액으로 사용하여 근관형성을 하였다. 근관형성 완료후 1군과 2군은 10ml의 생리식염수로, 3군은 10ml의 0.5M EDTA용액으로 final flush를 시행하여, 3군의 도말층을 제거하였다. 치근수직절단과 ethylene oxide(EO) gas 소독후 1, 2, 3군의 시편(각군10개시편)을 Prevotella nigrescens가 부유된 Brain Heart Infusion with Yeast estract, Hemin and Menadione(BHIYHM) broth내에 37$^{\circ}C$에서 3시간 동안 incubation했다. 4, 5, 6군은 실험과정을 검증하기 위한 대조군으로써, 4군(1개치아)과 5군(1개치아)은 1군, 2군과 같이 각각 생리식염수와 NaOCl만을 이용한 근관형성으로 도말층을 잔존시키고, 6군(1개치아)은 3군과 같이 NaOCl과 EDTA를 적용하여 도말층을 제거한 후, 치근 수직절단과 EO gas 소독을 시행했다. 모든 시편(1, 2, 3, 4, 5, 6군)을 통상의 방법에 따라 처리한 후 주사전자현미경을 통하여 관찰, 근관내면에 부착되어 있는 Prevotella nigrescens의 개수, 모양, 상아세관 및 도말층과의 관계 등을 관찰, 비교, 분석하였다. 결과는 t-test와 one-way ANOVA를 통하여 통계처리 하였다. 결론 - 1. 근관형성 후 근관내 상아질 표면 전체는 도말층으로 덮여 있는 양상을 보였다. 2. 3.5% NaOCl과 0.5M EDTA를 적용하여 근관내 도말층을 효과적으로 제거할 수 있었으며, 상아세관 개구부가 확연히 노출되어 있는 소견을 관찰할 수 있었다. 3. 도말층이 덮인군에서 미생물의 부착이 유의성 있게 높았다(P<0.05). 4. 근관 형성중 형성되어 근관 상아질을 덮고 있는 도말층이 미생물의 부착을 증가시켜, 근관 재감염의 기회를 증가시킴을 알 수 있었다.

  • PDF

External Ultrastructure of the Adult Genital Segments of Pine Needle Gall Midge, Thecodiplosis japonensis Uchida et Inouye (솔잎혹파리(Thecodiplosis japonensis Uchida et Inouye)에 관한 연구 II - 성충 생식절의 표면미색구조 -)

  • 한성식;박용철;이찬용
    • Korean journal of applied entomology
    • /
    • v.27 no.3
    • /
    • pp.144-148
    • /
    • 1988
  • Using scanning electron microscope, we studied the adult genital segments of pine needle gall midge, Thecodiplosis Japonensis, Uchida et Inouye Male: There were two pairs of hypoproct a pair of claspettes and aedeagus, Hypoproct were surrounded with many setae and sensilla. Clasperres which was projected below hypoproct was composed of two aegments and had many sensilla Aedeagus was long and flattened and possesed some sensilla at the terminal. Female :Ovipositor was segmented into three parts. Each segment had a different externla sturcture; particularly, the 2nd one was covered with reversed boat-like attachments and did not show any sensillum.

  • PDF

이석의 일륜을 이용한 멸치의 산란기에 따른 성장률 변화

  • 송미화;이태원;황선도
    • Proceedings of the Korean Society of Fisheries Technology Conference
    • /
    • 2000.10a
    • /
    • pp.287-287
    • /
    • 2000
  • 전북 식도 연안 정치망에서 1996년 6월에서 11월 사이 월별로 채집된 멸치 유어 이석의 일륜과 그 폭을 광학현미경과 주사전자현미경으로 관찰하여 산란기를 추정하고, 일일 성장률을 역추산하여 산란기에 따른 일일 성장률을 비교 분석하였다. 시상면 (sagittal plane)을 지나는 이석에는 부화 성장 정지선(hatch check)이 형성되었고, 그 외부를 둘러싼 난황 자어기에 형성된 것으로 추정되는 평균 4개의 불분명한 미세성장선이 관찰되었으며, 난황흡수성장정지선(yolk-absorption mark)이후에는 비교적 명확한 일륜이 형성되었다. (중략)

  • PDF

THE EVALUATION OF MICROLEAKAGE OF PIT AND FISSURE SEALANT BY USAGE OF SELF-ETCHING ADHESIVE SYSTEM (자가 산부식 접착제를 이용한 치면열구전색의 미세누출 평가)

  • Kim, Hyun-Jin;Lee, Nan-Young;Lee, Sang-Ho
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.35 no.2
    • /
    • pp.216-224
    • /
    • 2008
  • The purpose of this study was to evaluate the effectiveness of fissurotomy and double application time of acidic primer of self-etching adhesive system of acid treatment on enamel surfaces for prevention of microleakage of pit and fissure sealants. The microleakage of pit and fissure sealants was evaluated by measuring the penetration depth of methylene blue solution. Specimens were divided by 4 groups according to the method of treatment. Group I: 35% phosphoric acid etching, 20 seconds. Group II: Priming with self-etching primer, 20 seconds. Group III: Priming with self-etching primer, 40 seconds. Group IV: Priming with self-etching primer, 20 seconds, after fissurotomy. The etched pattern produced on enamel was observed using a scanning electron microscope. Obtained data were analysed statistically using Kruscal-Wallis test followed by Mann-Whitney test for comparison of groups. The results are as follows: 1. Microleakage scores of group IV priming with self-etching primer 20 seconds after fissurotomy was the lowest. 2. Microleakage scores between group II and group III were not shown significant difference. 3. Enamel for 20 seconds etching with 35% phosphoric acid was observed the most effective etching pattern. And the etching pattern on the fissure enamel with self-etching adhesive 20 seconds after fissurotomy was more prominent than group II, III only using self-etching primer.

  • PDF

A Study of Abrasive Flow Machining on EDMed Surfacs of Tool Steel (방전가공된 공구강표면의 연마재 유동가공에 관한 연구)

  • 최재찬;김창호;허관도
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1996.04a
    • /
    • pp.8-13
    • /
    • 1996
  • A relatively new non-traditional finishing process called Abrasive Flow Machining(AFM) is being used to deburr, polish and radius workpiece or produce compressive residual stresses by flowing an abrasive-laden viscoelastic compound across the surface to be machined. This paper presents the effects of AFM on surfaces of tool steel produced by EDM and W-EDM. Using AFM, white layer produced by EDM is erased almost equally and the amount of metal removal is significantly affected the initally machined surface condition of workpiece. The dimension of workiece is enlarged and its surface roughness is improved as AFM time is increased. The optimal AFM time can be established from the experimental results. It is considered that the grinding method lide AFM is useful to grind complex or slim geometry of workpiece even. Scanning Electron Microscopy(SEM) was used to study the surface characteristics of the workpiece before and after AFM.

  • PDF

A Contribution to the Pollen Morphology of Korean Salix L. (Salicaceae) (한국(韓國) 버드나무속(屬) 화분(花粉)의 형태학적(形態學的) 연구(硏究))

  • Kim, Kae Hwan;Koh, Dae Sik;Zsuffa, L.
    • Journal of Korean Society of Forest Science
    • /
    • v.78 no.1
    • /
    • pp.35-41
    • /
    • 1989
  • The pollen morphology of nine species and one variety of Korean Salix was investigated by means of light and scanning electron microscopy. Pollen grains are tricolpate or tricolporate varying from subprolate or prolate. Based on aperture and sculpture patterns, the pollen morphology of the investigated Korean Salix appeared to exhibit three different types.

  • PDF

INFLUENCE OF THE ENAMEL TREATMENT WITH ER:YAG LASER ON THE MICROLEAKAGE OF PIT AND FISSURE SEALANT (Er:YAG 레이저를 이용한 법랑질 표면처리가 치면열구전색제의 미세누출에 미치는 영향)

  • Lee, Ji-Hyun;Kim, Jae-Moon;Kim, Shin;Jeong, Tae-Sung
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.33 no.2
    • /
    • pp.192-200
    • /
    • 2006
  • The aim of this study was to assess the microleakage underneath a pit and fissure sealant bonded to occlusal surfaces treated by Er:YAG laser To determine the most effective energy density of laser, fourteen specimens were irradiated from 50mJ to 300mJ at 3Hz. After irradiation, the lased specimens were observed under the scanning electron microscope. Thirty six non-carious extracted premolars were randomly assigned to four groups of nine teeth: group 1, no treatment on the occlusal surface; group 2, acid etching for 15 seconds; group 3, Er:YAG laser irradiation; group 4, acid etching followed by Er:YAG laser irradiation. The pits and fissures were sealed with unfilled sealant(Helioseal F) and the specimen teeth were thermo-cycled, immersed in 2% Rhodamine B solution, longitudinally sectioned and analyzed for microleakage with fluorescent microscope. The results were as follows: 1. Er:YAG lased surfaces with 50mJ, 3Hz showed a similar pattern of irregularity with acid etched enamel surfaces 2. The mean microleakage score increased in the order of group 2, 4, 3 and 1. There was no significant difference among group 1, 3 and 4(p>0.05), however group 2 showed significantly less microleakage compared with group 1 and 3. Conclusively, the laser irradiation seemed not enough to replace the acid etching for proper retention of pit and fissure sealants.

  • PDF