• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.137-146
• /
• 2004

Laser Induced Breakdown Spectroscopy(LIBS) system is being developed as an in-situ analysis system for the radioactive waste glass in the cold crucible melter. In order to complete the LIBS system, a spectrometer, a detector, and a laser were structured. An ESA 3000 (LLA Instruments GmbH, Germany) including a calibrated Kodak KAF-1001 CCD detector was selected as the spectrometer. A Q-switched Nd-YAG Brilliant(Quantel, France) laser was selected as an energy source. As the first research stage, the excitation temperatures of Fe(I) as a function of the detector's delay intervals(500, 1000, 1500, 2000ns) were evaluated using the Einstein-Boltzmann equation. The optimized excitation temperature of Fe (I) was 7820k at the delay time of 1500㎱ using the 532nm Nd-YAG laser pulse. This LIBS system will be optimized under the real environment vitrification facility in the near future and then used to be in-situ analyzed the glass compositions in the melter qualitatively.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.191-195
• /
• 1996

A optical system of a movile LIDAR is designed for air pollution research. After the inverse Cassegrain type collimator, the laser beam falls on the mirror which serve for coinciding optical axis of laser beam and the receiving telescope. Then, it is directed into the atmosphere and back scattered radiation back to the receiving telescope by the scanning mirror. The unit of scanning mirror allows to rotate the mirror along the altitude 0$^{\circ}$~60$^{\circ}$, and the azimuth 0$^{\circ}$~360$^{\circ}$. The scanning mirror is not connected with the receiving telescope but placed on the roof of the mobile. The received beam is spatial filtered by a spatial filter and collimated by a fabric lens. Thereafter, the beam is devided into 2 channel for registration by a beam splitter. Each laser beam is transformed into an electrical signal by means of the photomultifier and then processed to be analyzed.

• Journal of radiological science and technology
• /
• v.31 no.1
• /
• pp.49-54
• /
• 2008

After x-ray 5Gy radiation on the whole body of a mouse using a linear accelerator, its leucocyte, erythrocyte, and platelet were observed by SEM. Also, after injecting propolis into the abdominal cavity, the radio-protective effect of blood corpuscles was studied. The observation of micromorphology in blood corpuscles revealed that the number of leukocyte, erythrocyte, and thrombocyte decreased in the experimental group and the lump got together in blood corpuscles after 10 and 20 days. In RBC, crack or break on the surface and poikilosperocytes were observed. In the irradiation group, the size of leucocytes was smaller than that in control group and the number of villus at the verge substantially decreased. The blood corpuscles in the propolis group, however, had the similar results to control group.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1319-1324
• /
• 1998

The phase and frequency commands of a ratating radar system that utilizes frequency scanning to steer the beam in the azimuth direction and phase shifters in the elevation direction are derived in terms of the angles of the groung based coordinate system. The antenna type considered is slotted arrays that are easy to construct at such high microwave frequency as the X band. The frequency that has non-linear characteristics as a functio ofthe elevation angle is plotted and the derived frequency equation is aproximated to be a simple form to reduce the calculation time for real time multi-function radar systems. It is shown that the approximated frequency command is in good agreement with the exact one if the range of azimuth scanning is limited by ${\pm}10^{\circ}$.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.3
• /
• pp.11-16
• /
• 2000

In this paper, a real-time implementation of scene-based non-uniformity correction by digital technique is proposed for microscan-mode staring infrared cameras. Most scene-based non-uniformity correction algorithms, without sensor motion, can not be applied to stationary scenes because of image blurring and fading. Using microscanning effect, coupled with a modified version of Scribner's algorithm, the proposed technique can correct the artifacts and non-uniformities in real time Computer simulations and hardware experiments demonstrate substantial Improvement of image qualities in stationary as well as moving scenes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1A
• /
• pp.66-72
• /
• 2002

In this paper, we implemented the GenJTAG, a CAD tool, which generates a code of boundary scan circuit supporing a board level testing and d BIST(Built-In Self Test) written in verilog-HDL. A boundary scan circuit code that supports user's own BIST instructions is generated based on the informations from the users. Most CAD tools hardly allow users to add their own BIST instructions because the generated code described in gate-level. But the GenJTAG generates a behavioral boundary scan circuit code so users can easily make a change on the generated code.

• 대한핵의학회:학술대회논문집
• /
• 1980.05a
• /
• pp.11.1-11.1
• /
• 1980

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.577-578
• /
• 2010

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2012.05a
• /
• pp.367-368
• /
• 2012

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.302-303
• /
• 2003

원자간력-현미경(Atomic Force Microscope)은 비파괴적인 방법으로 광소자의 단면 형상과 거칠기에 관한 정보를 원자단위의 해상도로 얻어낼 수 있다. 그러나 탐침의 형상에 의해서 공간분해능에 제한을 받는다. 이 문제를 해결하기 위해, 원자간력-현미경 탐침의 끝부분에 나노튜브를 부착하였다. 주사형 전자현미경에 설치한 나노조작기를 사용하여 나노튜브를 탐침에 밀착하도록 이동시킨 후에, 탄화물 증착으로 접착시키는 방법을 사용하였다.