• Tunnel and Underground Space
• /
• v.17 no.2 s.67
• /
• pp.128-138
• /
• 2007

At low in-situ stress, the continuity and distribution of natural fractures in rock mass predominantly control the failure processes. However at high in-situ stress, the failure process are affected and eventually dominated by stress-induced fractures preferentially growing parallel to the excavation boundary. This fracturing is often observed in brittle type of failure such as slabbing or spatting. Recent studies on the stress- or excavation-induced damage of rock revealed its importance especially in a highly stressed regime. In order to evaluate the brittle failure around a deep underground opening, physical model experiments were carried out. For the experiments a new tue triaxial testing system was made. According to visual observation and acoustic emission detection, brittle failure grades were classified under three categories. The test results indicate that where higher horizontal stress, acting perpendicular $(S_{H2})$ and parallel $(S_{H1})$ to the axis of the tunnel respectively, were applied, the failure grade at a constant vertical stress level (Sy) was lowered. The failure initiation stress was also increased with the increasing $S_{H1}\;and\;S_{H2}$. From the multi-variable regression on failure initiation stress and true triaxial stress conditions, $f(S_v,\;S_{H1},\;S_{H2})$ was proposed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.199-199
• /
• 2019

친환경적인 산업기술인 초미세기포(Ultra Fine Bubble, 이하 UFB) 제조 기술은 농업, 수처리, 그리고 환경재생 등 다양한 분야에서 적용되고 있다. UFB는 1,000nm 이하의 크기를 가진 기포로서 용존산소를 통한 농작물 성장 촉진 및 수중의 대장균 및 세균제거 등 다양한 성질을 지니고 있다. 본 연구는 기존의 방식과는 다르게 자왜현상을 메카니즘으로 갖는 타격식으로 제조된 UFB 생성장치를 통해 생성된 200nm이하의 크기를 가진 UFB를 실제 딸기 농장에 적용하여 딸기의 성장을 모니터링하고 살균 성능을 가진 화학제품과 UFB를 대장균에 적용하여 대장균 제거효율을 비교하였다. 딸기농장에 기존에 사용되던 지하수 대신 UFB를 주입하여 딸기성장 초기단계의 DO농도를 측정하고 딸기 생식단계에 산소포화도에 대한 질산염의 농도를 측정하여 상관관계를 분석하였으며 각각의 딸기 열매를 수확하여 무게를 비교하였다. 또한 대장균이 함유되어있는 대변을 채취하여 살균 성능을 가진 화학제품과 UFB수를 각각 대장균이 포함된 실험원수와 반응시켜 배양하고 검출된 대장균 개체 수에 확인하여 제거효율을 비교분석 하였다. 딸기성장 초기단계의 DO농도 측정결과 DO농도가 6~9ml/L로 높게 유지되고 있음을 확인하였고 딸기 생식단계에서 산소포화도가 일정하게 유지되고 있음에 따라 질산염의 농도가 점차 감소하는 것을 확인하였다. 또한 수확한 열매의 무게는 각각 37g, 19g으로 UFB수를 통해 재배된 딸기가 약 2배 이상 높은 것으로 나타났다. 이와 같은 결과는 수중의 용존산소가 딸기 성장 초기에 뿌리의 발육에 긍정적인 영향을 미치고 질산염을 원활하게 섭취하게 하여 딸기의 성장이 촉진되었고 열매의 무게가 증가하였다고 판단된다. 또한 대장균이 함유된 원수, 원수+화학제품, 원수+UFB를 접종하여 대장균과 반응시켜 배양하여 대장균 개체 수를 확인한 결과, 원수의 경우 약 600개의 대장균의 개체수가 나타났고, 원수+화학제품의 경우 검출된 대장균의 개체 수는 약 300개 정도로 나타났다. 이를 희석한 비율을 계산하여 대장균 개체 수를 나타내면 원수 약 6000개/ml, 원수+화학제품 약 6000개/ml로 비슷하게 나타난다. 반면, 원수+UFB 경우 검출된 대장균의 개체 수는 1개로 희석한 비율을 계산하여 대장균 개체 수를 나타내면 약 20개/ml로 나타난다. 이와 같은 결과를 통해 UFB는 99.9%의 대장균 제거효율을 보였으며, 화학제품은 대장균 제거효율을 보이지 않았다. 따라서 화학제품은 항균기능은 작용하지만 살균기능은 거의 없다고 판단하였고, UFB의 경우 기포가 소멸하면서 발생되는 초고온, 초고압을 형성하여 주변에 존재하는 대장균을 제거하였거나, 기포가 소멸할 때 발생되는 OH 라디칼을 통해 대장균의 세포를 화학적으로 분해시켜 대장균을 제거하였다고 보인다.

• Journal of the Korean Society for Computer Game
• /
• v.31 no.4
• /
• pp.197-203
• /
• 2018

As people's interest in Virtual Reality has recently increased, peripherals have also made many progress. There is a lot of research being done from VR environment to VR configuration through scanning at room level with various interface devices that can interact with objects in the environment. According to current VR research Home VR uses multiple haptic interfaces to interact with objects configured in the VR environment, the method uses room scanning to some extent is beyond the spatial constraints and may use tracking equipment to interact with real objects. And advances in 3D printers have enabled the distribution of commercial 3D printers and home 3D printers, and made it easy for 3D printers to create models of their choice at home or at home. Considering the above two factors, We think it is necessary to study the difference between a model's object that people feel when interacting directly with an easy-to-create model in a VR environment. Therefore, in this paper, we are going to implement objects produced by 3D printers in VR space and study the differences between using real objects and other general interaction equipment through user testing with those that are actually implemented.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.32-47
• /
• 2013

The concepts of authenticity and integrity are very important standards to be satisfied in the conservation and utilization of Scenic Site (名勝), literally meaning the places of scenic beauty, as a public heritage. These concepts, which are frequently used in the conservation and utilization of the World Heritage inscribed by UNESCO, can be applied to all kinds of heritages. Recently, it has been widely recognized that the concepts of authenticity and integrity are not separable but interconnected. Accordingly, the maintenance of authenticity in Scenic Site should include not only the physical preservation but also the succession of historical tradition of enjoyment. The integrity in Scenic Site refers to the physical and social conditions under which authenticity can be satisfactorily protected. The aim of this study is to reconstruct the traditional ways of enjoying historical and cultural Scenic Site with emphasis on the Yeongnam Region and make a critical examination of cultural property protection areas that have been designated. Then, this study aims to find the ways to utilize Scenic Site to secure the standards of authenticity and integrity. As a result it was discovered that cultural property protection areas are not designated well enough to satisfy the standards of authenticity and integrity. Considering the fact that cultural property protection areas are the minimal institutional systems to maintain the original value of Scenic Site, it is necessary to pay more careful attention to the ways of securing the authenticity and integrity in Scenic Site.

• Cross-Cultural Studies
• /
• v.50
• /
• pp.483-507
• /
• 2018

Shylock in Shakespeare's play, The Merchant of Venice has been considered as either a devilish villain, or as a victim who was persecuted unfairly by the Christian society in Venice. By focusing on the matter of the Other, which has been summarily overlooked in literary texts and the literary criticism, it is noted that the New Historical and Cultural criticism interpreted Shylock as the racial, religious, and economic Other in the Venetian society which at the time was dominated by Christian ideals. The purpose of this paper is to show how Shylock becomes an abjected Other, that is, the abject, based on Julia Kristeva's theory of abjection. According to Kristeva, an abjection is the process of expulsion of otherness from society, through which the subject or the nation tries to set up clear boundaries and establish a stable identity. Shylock is marginalized and abjected by the borders drawn by the Venetian Christian society, which in a strong sense tries to protect its identity and homogeneity by rejecting and excluding any unclean or improper otherness. The borders include the two visible borders like the Ghetto and the red hats worn by the Jews, and one invisible border in the religious and economic fields. By asking for one pound of Antonio's flesh when he can't pay back 3,000 ducats owed, Shylock tries to cross the border between Christians and Jews. Portia frustrates Shylock's desire to violate the border by presenting a different interpretation of the expression, 'one pound of flesh,' from Shylock's interpretation. And in doing so she expels him back to his original position of abject.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.10
• /
• pp.39-49
• /
• 2011

Recently PBD method, one of acceleration of consolidation methods is used in the soft ground to shorten consolidation time for fast settlement during construction. It is economical and easy to work. Discharge capacity of PBD is sensitive in proportion to thickness of soft ground layer, and drainage of PBD declines due to disturbance effect in surrounding ground by mandrel used for vertical drainage setting and setting machines and type. Also, deviation of discharge capacity is large according to ground condition, construction condition and soil properties. In addition, when embankment loading is not conducted instantly after PBD setting due to rain or lack of embankment material supply, it causes leaving period problems. But cause and analysis of those problems for discharge capacity is lack. So, in this test, ground improvement and discharge capacity is investigated by implementing composite discharge capacity test for analysis of an effect factor of PBD discharge capacity with leaving period. After fixing the vertical drain on a cylindrical cylinder, put churned sample into the cylinder. Then leave 0day, 30day, 60day and 90day. And then, load following the loading step of 30, 70 and 120kPa using a pressure device. As a result, the longer leaving period, discharge capacity is reduced. It is caused by a decrease of discharge area caused by creep transformation moisture absorption of PBD filter after long leaving period.

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.60-67
• /
• 2021

This study presented techno-economic analysis of a 500 MWe oxy-coal power plant with CO2 capture. The power plant included a circulating fluidized-bed (CFB), ultra-supercritical steam turbine, flue gas conditioning (FGC), air separation unit (ASU), and CO2 processing unit (CPU). The dry flue gas recirculation (FGR) was used to control the combustion temperature of CFB. One FGR heat exchanger, one heat exchanger for N2 stream exiting ASU, and a heat recovery from CPU compressor were considered to enhance heat efficiency. The decrease in the temperature difference (ΔT) of the FGR heat exchanger that means the increase in heat recovery from flue gas enhanced the electricity and exergy efficiencies. The annual cost including the FGR heat exchanger and FGC cooling water was minimized at ΔT = 10 ℃, where the electricity efficiency, total capital cost, total production cost, and return on investment were 39%, 1371 M$, 90 M$, and 7%/y, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.483-491
• /
• 2021

The identification of regional collision risks in water areas is significant for the safety of navigation. This paper introduces a new method of collision risk assessment that incorporates a clustering method based on the distance factor - hierarchical clustering - and uses real-time data in case of several surrounding vessels, group methodology and preliminary assessment to classify vessels and evaluate the basis of collision risk evaluation (called HCAAP processing). The vessels are clustered using the hierarchical program to obtain clusters of encounter vessels and are combined with the preliminary assessment to filter relatively safe vessels. Subsequently, the distance at the closest point of approach (DCPA) and time to the closest point of approach (TCPA) between encounter vessels within each cluster are calculated to obtain the relation and comparison with the collision risk index (CRI). The mathematical relationship of CRI for each cluster of encounter vessels with DCPA and TCPA is constructed using a negative exponential function. Operators can easily evaluate the safety of all vessels navigating in the defined area using the calculated CRI. Therefore, this framework can improve the safety and security of vessel traffic transportation and reduce the loss of life and property. To illustrate the effectiveness of the framework proposed, an experimental case study was conducted within the coastal waters of Mokpo, Korea. The results demonstrated that the framework was effective and efficient in detecting and ranking collision risk indexes between encounter vessels within each cluster, which allowed an automatic risk prioritization of encounter vessels for further investigation by operators.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.102-108
• /
• 2020

In this paper, we propose a real-time method of detecting hand motions and extracting the signal frame induced by EF(Electric Field) sensors. The signal induced by hand motion includes not only noises caused by various environmental sources as well as sensor's physical placement, but also different initial off-set conditions. Thus, it has been considered as a challenging problem to detect the motion signal and extract the motion frame automatically in real-time. In this study, we remove the PLN(Power Line Noise) using LPF with 10Hz cut-off and successively apply MA(Moving Average) filter to obtain clean and smooth input motion signals. To sense a hand motion, we use two thresholds(positive and negative thresholds) with offset value to detect a starting as well as an ending moment of the motion. Using this approach, we can achieve the correct motion detection rate over 98%. Once the final motion frame is determined, the motion signals are normalized to be used in next process of classification or recognition stage such as LSTN deep neural networks. Our experiment and analysis show that our proposed methods produce better than 98% performance in correct motion detection rate as well as in frame-matching rate.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.97-101
• /
• 2020

Using passive electric field sensor which operates in non-contact mode, we can measure the electric potential induced from the change of electric charges on a sensor caused by the movement of human body or hands. In this study, we propose a new method, which utilizes PLN induced to the sensor around the moving object, to detect one's hand movement and extract gesture frames from the detected signals. Signals from the EPS sensors include a large amount of power line noise usually existing in the places such as rooms or buildings. Using the fact that the PLN is shielded in part by human access to the sensor, signals caused by motion or hand movement are detected. PLN consists mainly of signals with frequency of 60 Hz and its harmonics. In our proposed method, signals only 120 Hz component in frequency domain are chosen selectively and exclusively utilized for detection of hand movement. We use FFT to measure a spectral-separated frequency signal. The signals obtained from sensors in this way are continued to be compared with the threshold preset in advance. Once motion signals are detected passing throng the threshold, we determine the motion frame based on period between the first threshold passing time and the last one. The motion detection rate of our proposed method was about 90% while the correct frame extraction rate was about 85%. The method like our method, which use PLN signal in order to extract useful data about motion movement from non-contact mode EPS sensors, has been rarely reported or published in recent. This research results can be expected to be useful especially in circumstance of having surrounding PLN.