• Journal of the Korean Institute of Gas
• /
• v.3 no.2 s.7
• /
• pp.43-52
• /
• 1999

An experimental chamber was fabricated to observe the gas diffusion behavior of leak gas from underground city-gas pipeline. It was made of acryl so that feeding of gas and the measuring points of the gas could be varied in each experiment. The MOS sensors were used to measure the concentrations of leak gas. The soil media such as the Jumunjin standard sand and the granite weathered soil were used to measure the gas diffusion and the change of leak gas concentrations was measured with time for various gas flow rate. As the distance between the leak point of gas and the measuring point of MOS sensor decreases, or the leak rate increases, the detection time of gas at a measuring points decreases and the gas concentration increases quickly and the concentration of the gas at steady state also increases. As the density of granite weathered soil is higher than that of Jumunjin standard sand for compaction, the detection time of leak gas in the granite weathered soil was longer than that in the Jumunjin standard soil. The leak gas concentrations in the granite weathered soil were lower than those in the Jumunjin standard sand at the beginning of gas leaking from a pipe, but inverse phenomenon was occured at steady state.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1280-1287
• /
• 2020

This paper proposes a vision-based food recognition method for automated production of custom cakes. A small camera module mounted on a food art printer recognizes objects' shape and estimates their center points through image processing. Through the perspective transformation, the top-view image is obtained from the original image taken at an oblique position. The line and circular hough transformations are applied to recognize square and circular shapes respectively. In addition, the center of gravity of each figure are accurately detected in units of pixels. The test results show that the shape recognition rate is more than 98.75% under 180 ~ 250 lux of light and the positioning error rate is less than 0.87% under 50 ~ 120 lux. These values sufficiently meet the needs of the corresponding market. In addition, the processing delay is also less than 0.5 seconds per frame, so the proposed algorithm is suitable for commercial purpose.

• 전기의세계
• /
• v.39 no.5
• /
• pp.38-49
• /
• 1990

NOAA 위성에서 보내오는 고해상도(HRPT) 전좌신호를 추적하고 수신하는 수신장치의 개발을 소개하였으며, 또한 저해상도(ART) 수신 장치 및 수신된 화상을 얻는 방법을 소개하였다. HRPT는 직경 3m의 안테나로 1500km의 거리에 있는 NOAA 위성으로 부터 받는 반송파대 잡음비는 15dB 측정되어 2000km 이내의 위성 신호 수신이 가능함을 보였다. 위성추적은 산출된 위성궤도를 따라 자동적으로 위성을 추적하는 program추적으로 할 수 있으며, 전파신호의 도래 방향으로 안테나를 자동 이동시키는 monopulse 추적이 성공적으로 동작됨을 확인하였다. 전 시스템 중 포물면 안테나와 치치 그리고 철탑을 국내 업체에 주문 제작 하였으며 복조기를 제외하고 각종 프로그램을 포함한 전 시스템이 실험실에서 설계, 제작, 시험되었다. HRPT수신시스템은 과학기술처 특정연구와 체신부 전파연구소 연구사업으로 4개년에 걸쳐 수행되었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.230-232
• /
• 2012

스마트폰, 테블릿 PC 등의 발달로 개인 휴대 단말기 시대가 활성화되고 있다. 이에 따라 모든 웹 브라우져에서 웹 문서를 제작하기 위한 HTML5가 웹 및 앱 연동 표준으로 대두되고 있다. 따라서 본 논문에서는 카메라가 장착된 개인 휴대 단말기에서 촬영하고 소유하고 있는 사진을 불러와서 원하는 형태로 편집하고 웹 및 앱 스토어에서 개인의 앨범 형태로 제작 가능한 시스템을 개발하여 구현한다. 이를 통하여 사진의 주문 프로세스 개선 및 컨텐츠 보강, 카메라 이벤트 효과 증대 등이 기대된다.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.334-365
• /
• 2010

Mother-of-Pearl craftwork sketch involves the whole process of making a piece of work. Therefore, it includes types, forms, sizes, and patterns of the work. Some information about when and by whom those works were manufactured and who ordered them are still found in some sketches. This paper seeks to find out popular types and patterns of the works in each period and its demand and the way of supply by examining the collection of approximately 1700 Mother-of-Pearl craftwork sketches from the period of Japanese colonization up to the present time, which are owned by Mr. Song Bang-wung, Important Intangible Cultural Heritage no.10. Typical patterns of sketches are the hua-jo(花鳥 : Flowers and Birds), the Sakunja(四君子 : Four Gracious Plants), cultural treasures, figures in folk tales, 'Su-bok(壽福)' characters, and landscape. The pattern sketches have changed according to the circumstances of Korean society. During the period of Japanese colonization from the 1920s to the 1940s the manufacture and the supply and demand of Mother-of-Pearl craftworks were controled by the Japanese government. As a result, many of the patterns were adjusted to the Japanese taste. Most of its customers were also Japanese. During the 1950s after Independence the American Military Forces appeared as new customers due to the Korean War. Thus, the traditional Korean patterns to decorate accessories adored by American soldiers gained popularity. Foreign Mother-of-Perls were imported from the late 1960s to the 1970s. They were bigger and more colorful than those of Korean and it enabled the sketches bigger and the patterns more various. The most popular pattern in this period was the pattern of cultural treasures, such as an image of Buddha, metalcraft works, porcelains and pagodas. In terms of a technique, new techniques, such as engraving and rusting were introduced. There was a great demand for Mother-of-Pearl craftworks in the 1970s as people were highly interested in them. They were entirely made to order and there was a large demand from diverse organizations, furniture dealers and individuals. And the Mother-of-Pearl craftwork was in full flourish in the 1970s due to the country's economic development and the growth of national income. Mass production of the works was possible and the professional designers who drew patterns actively worked in this period. The favor of Mother-of-Pearl craftworks declined in the 1980s since the built-in furniture and the Western style of furniture became prevalent due to the change of housing into apartments. But it seemed that the manufacture of Mother-of-Pearl craftworks revived for once the technique of Kunum-jil(끊음질 : cutting and attaching) became popular in Tong-young(統營). After the 1990s, however, the making of Mother-of-Pearl craftworks gradually declined as the need of them decreased. Now it barely maintains its existence by a few artisans.

• Convergence Security Journal
• /
• v.7 no.3
• /
• pp.87-93
• /
• 2007

We propose a mobile point-of-sale system, which consists of only mobile information terminals and personal computers. The proposed system provides most of functionalities related with resource planning, adminstration and management, provided by medium-scale or large-scale POS systems, with additional functionalities, such as automatic information gathering and management through mobile interconnection, while eliminating the necessity of additional special-purpose devices, such as bar-code systems. The proposed system transmits order information through wireless and wired communication lines, thus allowing real-time sharing of order information among diverse information devices, such as mobile order receiving terminals, main server within stores, monitors and printers located in production lines. Also, the system is able to transfer such detail information produced within stores in real-time to the enterprise-level accounting, sales, logistics, personnel management system, which facilitate enterprise-wide management and administrative decision-making. No additional programs are required for mobile terminals. Order information received by such terminals are entered into databases through web server of main server and that information is again transferred to main server and production line printers. The proposed system can handle all the point-of-sale information and can provide almost of the POS functionalities by simply utilizing wireless internet, personal computers, and mobile terminals without installing specific-purpose peripheral devices. The proposed system can be widely applied to the small-scale stores and will contribute in reducing construction and maintenance cost required for point-of-sale management.

• Economic and Environmental Geology
• /
• v.52 no.6
• /
• pp.637-645
• /
• 2019

Due to the transformation to the intelligent information society, the rapid change of our life and environment is expected. The Ministry of Science and ICT (MSIT) and the National Research Council of Science and Technology (NST) introduced a five-year government supported research institution's planning and evaluation based on the mid-to long-term perspective. This study collects international benchmarking information including industry, academia, and research fields by collecting mid- and long-term strategy reports from public research institutes, surveys by experts from abroad universities and research institutes, and analyzing overseas market information reports. The British Geological Survey (BGS), the U.S. Geological Survey (USGS) and the japanese geological survey related institutes (AIST-GSJ) plans for three-dimensional national geological information, predictions of geological environmental disasters, and development of important metals and material in the low carbon economic transformation and in the era of the Fourth Industrial Revolution. The mid- and long-term program emphasizes basic and public research on geological information through abroad experts survey such as the IPGP-CNRS etc. The market analysis of the mining automation and digital map sectors has been able to derive the fields in which the role of public research institutes by the market is expected such as data collection on land and in the air, mobile or three-dimensional information production, smooth/fast/real-time maps, custom map design, mapping support to various platforms, geological environmental risk assessment and disaster management information and maps.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.11a
• /
• pp.257-266
• /
• 2000

산업 및 가정용 기기들이 점차 복잡해짐에 따라 다양한 공학 분야의 해석 기술을 동시에 고려하면서 이들 원리를 적용한 최적의 설계를 결정하는 방법론의 필요성이 대두되고 있다. 다분야통합최적설계 또는 MDO(Multidisciplinary Design Optimization)라 일컫는 새로운 기술은 이러한 필요에 대응하는 기술로서 국내외적으로 활발한 연구가 진행되고 있다. 이러한 MDO 기술을 구현하는 소프트웨어와 하드웨어 복합 체계를 MDO 프레임웍(framework)이라 한다. 일반적으로 프레임웍이란 실제 응용프로그램의 용도에 맞는 주문제작(customization)이 가능한 일종의 전단계 프로그램이라 할 수 있다 MDO 프레임웍은 설계 및 해석 도구들간의 인터페이스를 제공하고, 이들 도구들이 사용하는 설계 데이터를 효율적으로 공유할 수 있도록 지원하여, 설계 작업을 정의, 실행, 관리하는 역할을 한다. 이러한 MDO 프레임웍은 설계 작업을 통합적으로 관리하고 자동화하여 설계 도구간의 데이터 전달과 변환에 소묘되는 설계자의 부담을 경감시키며 다분야 전문가가 참여하는 공통 작업 환경을 제공함으로써 설계 효율성을 증진시킨다. 본 논문에서는 이러한 효용을 달성하기 위한 MDO 프레임웍(framework)을 제시하고 프레임웍 설계의 논리적 근저와 타당성을 밝힌다. 본 논문에서 제안하는 다분야 통합 최적화를 위한 분산형 지능 시스템인 DisMDO는 사용자가 GUI를 동해서 편리하게 다분야통합최적화 문제를 해결할 수 있도록 지원하며, 제공되는 스크립트 언어를 동해서도 이를 정의할 수 있도록 지원하여 일괄처리도 가능하도록 한다. 또한, 집중화된 데이터베이스를 관리하여 다분야 전문가들이 공통의 데이터를 안전하게 공유할 수 있도록 지원하며, 외부에서 제공되는 해석 도구나 최적화 모듈을 손쉽게 프레임웍에 통합시킬 수 있도록 하는 인터페이스 제작기(factory) 기능을 제공한다.ackscattering spectroscopy, X-ray diffraction, secondary electron microscopy, atomic force microscoy, $\alpha$-step, Raman scattering spectroscopu, Fourier transform infrared spectroscopy 및 micro hardness tester를 이용하여 기판 bias 전압이 DLC 박막의 특성에 미치는 영향을 조사하였다. 분석결과 본 연구에서 제작된 DLC 박막은 탄소와 수소만으로 구성되어 있으며, 비정질 상태임을 알 수 있었다. 기판 bias 전압의 증가에 따라 박막의 두께가 감소됨을 알 수 있었고, -150V에서는 박막이 거의 만들어지지 않았으며, -200V에서는 기판 표면이 식각되었다. 이것은 기판 bias 전압과 ECR 플라즈마에 의한 이온충돌 효과 때문으로 판단되며, 150V 이하에서는 증착되는 양보다 re-sputtering 되는 양이 더 많을 것으로 생각된다. 기판 bias 전압을 증가시킬수록 플라즈마에 의한 이온충돌 현상이 두드러져 탄소와 결합하고 있던 수소원자들이 떨어져 나가는 탈수소화 (dehydrogenation) 현상을 확인할 수 있었으며, 이것은 C-H 결합에너지가 C-C 결합이나 C=C 결합보다 약하여 수소 원자가 비교적 해리가 잘되므로 이러한 현상이 일어난다고 판단된다. 결합이 끊어진 탄소 원자들은 다른 탄소원자들과 결합하여 3차원적 cross-link를 형성시켜 나가면서 내부 압축응력을 증가시키는 것으로 알려져 있으며, hardness 시험 결과로 이것을 확인할 수 있었다. 그리고 표면거칠기는 기판 bias 전압을 증가시킬수록 더 smooth 해짐을 확인하였다.인하였다.을 알 수 있었다. 즉 계면에서의 반응에 의해 편석되는 Ga에 의해 박막의 strain이 이완되면, pinhole 등의 박막결함

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3
• /
• pp.11-19
• /
• 2000

This research deals with the implementation procedures of a chorus processing DSP for karaoke system. It is necessary to compress the chorus data to store as many choruses as we can. We apply MPEG-1 audio algorithm to compress the chorus data. And the chorus system must be accompanied with the karaoke that can change the key and the tempo. So the chorus DSP must be able to change the key and tempo of the chorus data. We apply SOLA (Synchronized Overlap and Add) to do it. We designed the chorus DSP that can compress the chorus, change the key and tempo. And we verified the chorus DSP logic using FPGA. The used FPGA are two FLEX10K100s made by ALTERA. Finally we make the ASIC chip of chorus DSP and verify its operation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.61-72
• /
• 1997

The implementation of base station transceiver for Wideband CDMA(Code Division Multiple Access) PCS(Personal Communication Service) system using spread spectrum CDMA technology is presented in this paper. The receiver that requires wide dynamic range and high sensitivity and the transmitter that has good spurious emission supression were designed and implemented with 5 MHz RF channel bandwidth. This paper shows the some factors that should be considered and simulated using the RF simulation S/W with commercial and customized components. The implemented transceiver based on the simulation gave good results that satisfied the functional specifications of the transceiver.