• 주택과사람들
• /
• no.2 s.19
• /
• pp.89-90
• /
• 1991

1. 전체 허가동향 ''91.10월중 건축허가면적은 잠정집계 결과 전년동기대비 $39.7\%$ 감소한 것으로 나타났으며, $1\~10$월 누계치는 $4.2\%$ 감소하였음. 이는 주거용 건축에서 전년대비 $59.9\%$ 감소한 것에 기인함. 2. 용도별 허가동향 $\circ$ 주거용 건축 ''91. 10월중 주거용 건축은 전년대비 $59.9\%$ 감소하였으며, $1\~10$월 누계치는 $6.4\%$ 감소하였음. (사유) 5개 신도시의 공동주택사업승인분 감소가 주된 요인으로 작용하였으며, 주거용 건축물의 재건축을 제한한 9.4조치의 영향이 있었음. $\circ$ 상업용 건축 ''91.10월중 상업용 건축은 전년대비 $19.9\%$ 증가하였으며, $1\~10$월 누계치는 $6.5\%$ 감소를 나타냄. (사유) 건축제한조치가 10월부터 일부해제(수도권 이외로서 인구 30만 이하 도시의 일부 상업용 건축물)됨에 따라 상업용 건축이 증가되었으며, 이러한 증가가 ''90. 10월에 건축제한조치로 인하여 허가면적이 대폭 감소된데 대한 상대적 증가로 나타남. $\circ$ 공업용 건축 ''91.10월중 공업용 건축은 전년대비 $3.0\%$ 증가하였으며, $1\~10$10월 누계치는 $5.5\%$증가로 나타남.

• Fire Science and Engineering
• /
• v.26 no.1
• /
• pp.31-37
• /
• 2012

This study is intended to present a computational thermal model for a residential building. As the Performance Based Design is more popular, fire-intensity and fire-load have turned out to be very important factors for building design and can be predicted through some computational work. To predict and estimate the fire properties of a residential fire, we made some numerical models of combustibles and residential building. In a bid to validate the estimate values, computational analysis results from numerical models were compared with real fire tests. For computational analysis, the Fire Dynamics Simulator (FDS) was used with Large Eddy Simulation (LES) model for turbulence. Consequently, fire-intensity was well predicted and flash-over of rooms were successfully estimated.

• 주택과사람들
• /
• s.8
• /
• pp.14-24
• /
• 1991

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.428-430
• /
• 2012

플로팅 건축물은 현장 시공에 제약 조건이 발생할 가능성이 높아 현장 시공을 최소화할 필요가 있다. 이 연구에서는 현장 시공을 최소화할 수 있는 모듈러 설계를 플로팅 건축물 상부공간에 적용하기 위하여, 먼저 프로젝트 초기 단계에서의 고려 사항을 검토하였고, 소규모 레저용 플로팅 주거공간을 대상으로 모듈러 설계를 적용하는 방안을 시도하였다.

• Spatial Information Research
• /
• v.22 no.3
• /
• pp.89-99
• /
• 2014

The aim of this study is to represent the residential population distribution in Seoul, Korea more precisely through the dasymetric mapping method. Dasymetric mapping can be defined as a mapping method to calculate details from truncated spatial distribution of main statistical data by using ancillary data which is spatial data related to the main data. In this research, there are two types of data used for dasymetric mapping: the population data (2010) based on a output area survey in Seoul as the main data and the building footprint data including register information as ancillary spatial data. Using the binary method, it extracts residential buildings as actual areas where residents do live in. After that, the regression method is used for calculating the weights on population density by considering the building types and their gross floor areas. Finally, it can be reproduced three-dimensional density of residential population and drew a detailed dasymetric map. As a result, this allows to extract a more realistic calculating model of population distribution and draw a more accurate map of population distribution in Seoul. Therefore, this study has an important meaning as a source which can be applied in various researches concerning regional population in the future.

• Electric Engineers Magazine
• /
• v.250 no.6
• /
• pp.17-19
• /
• 2003

지능형 건물 인증제도의 적용대상은 건축물의 용도에 따라 크게 주거용 건물과 비주거용 건물로 나눌수 있으며 건축시점에 따라 신축건물과 기존 건물로 나누어 고려해 볼 수 있다. 또한 시행주체에 따라 공공발주 건물과 민간발주 건물로 나눌 수 있으며 건물의 규모 및 집합형태에 따라 적용대상을 단일건물, 복합건물 등으로 구분할 수 있다.

• Korean Architects
• /
• no.8 s.36
• /
• pp.82-82
• /
• 1971

서울시에서는 시가지가 확산되고, 간선 도로를 따라 건축물이 들어섬에 따라 용도지역 변경을 해서 건축허가등의 제약을 현실화했다고 한다. 이번 용도변경된 지역은 모두 주거지역때 대지면적의 60%까지 건축하던 것을 70%까지 건축할 수 있고, 점포전용 건물신축이 가능해 졌으며,40개 모선상업지역을 도로경계선에서 양쪽 12m까지 상업지역과 똑같은 용도로 대지를 쓸수 있게 됐다. 이번 용도지역변경 된 곳은 아래와 같다.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_2
• /
• pp.307-312
• /
• 2020

This study presents problems and improvement measures for the supply rate of single-alarm detector and fire extinguisher installed in households. Statistics from the NFDS show that 18 percent of all fires and 45 percent of deaths occurred in residential buildings over the past eight years. It was less than 60% that households be equipped rate of basic fire-fighting systems by 2019. In this study, I analyzed the law and statistics of fire to devise a method for fire safety. I proposed that the basic fire-fighting systems is be equipped in households. Like this : First, a free distribution policy for the over 60 years of age and Areas where is fire engine difficult to enter. Second, the policy of adopting safety pay in disaster. Third, the policy of expanding supply through the revision of the Licensed Real Estate Agents Act. Fourth, the policy of self-regulating installation by safety education and set up a data base system. Fifth make a law of household's National Fire Safety Standards.

• Journal of the Korean housing association
• /
• v.27 no.6
• /
• pp.145-153
• /
• 2016

The purpose of this study is to grasp the effectiveness of evacuation safety design by verifying the appropriateness of the standard of occupant load factor for residential buildings. To this end, the definition and current standard of occupant load factor for residential buildings were analyzed, and the problems of the current standard were clarified by interviewing professionals. In addition, changes in occupant load factor were examined by year based on statistical research, and evaluation on the current standard $18.6m^2/pers.$ was performed. As for evaluation methods, the need of redesigning of evacuation capacity was investigated by using evacuation simulation. As a result of the analysis, the most serious problem was clarification of the applicable standard for residential officetel, where the average occupant load factor was $26.1m^2/pers.$, which was not appropriate. However, as a result of evaluation on evacuation capacity, although there was no difference between statistical research results and the current standard in terms of evacuation capacity, when the standard for business facilities was applied to officetel, evacuation time doubled. Thus, this study suggests that when the current standard is applied to residential officetel, it is necessary to separate between residential use and business use.

• Journal of the Korean housing association
• /
• v.19 no.5
• /
• pp.111-120
• /
• 2008

The aim of this study is to present the design methods about manifold location being installed and size and to draw out the proper piping size as comparing the fluctuation of discharge with manifold size and residence size through the piping network analysis, when using the same faucet in accordance. The findings are summarized as follows, 1) an appropriate header main body pipe diameter was deemed to be $32{\sim}50\;mm$. 2) the research presented design measures for the application of appropriate water supply inlet pipe diameters according to residential buildings with various sizes. 3) the header direct branch piping method is ideal for small and medium-sized residential complexes, and the header branching and semi header methods are deemed to be more favorable for large residential complexes. 4) this study offered design measures for appropriate header system main body pipe diameters, water supply inlet pipe diameters, header system piping methods, application methods for functional auxiliary equipment units, and header system installation spaces and location.