• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.1
• /
• pp.15-19
• /
• 2015

We demonstrated an inspection system for detecting discoloration of PCB Cu ball pad with an OSP surface finish. Though the OSP surface finish has many advantages such as eco-friendly and low cost, however, it often shows a discoloration phenomenon due to a heating process. In this study, the discoloration was analyzed with device-independent CIELAB color space. First of all, the PCB samples were inspected with standard lamps and CCD camera. The measured data was processed with Labview program for detecting discoloration of Cu ball pad. From the original PCB sample image, the localized Cu ball pad image was selected to reduce the image size by the binarization and edge detection processes and it was also converted to device-independent CIELAB color space using $3{\times}3$ conversion matrix. Both acquisition time and false acceptance rate were significantly reduced with this proposed inspection system. In addition, $L^*$ and $b^*$ values of CIELAB color space were suitable for inspection of discoloration of Cu ball pad.

• Proceedings of the Military Operations Research Society of Korea Conference
• /
• 2002.03a
• /
• pp.69-94
• /
• 2002

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_2
• /
• pp.613-623
• /
• 2007

The main purpose of this study is to investigate the coordinate transformation based on two different systems between local geodetic datum(tokyo datum) and international geocentric datum(new Korea geodetic datum). For this purpose, three methods were used to determine seven parameters as follows: Bursa-Wolf model, Molodensky-Badekas model, and Veis model. Also, we adopted multiple regression equation method to convert from Tokyo datum to KTRF. We used 935 control points as a common points and applied gross error analysis for detecting the outlier among those control points. The coordinate transformation was carried out using similarity transformation applied the obtained seven parameters and the precision of transformed coordinate was evaluated about 9,917 third or forth order control points. From these results, it was found that Bursa-Wolf model and Molodensky-Badekas model are more suitable than other for the determination of transformation parameters in Korea. And, transforming accuracy using MRE is lower than other similarity transformation model.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.163-170
• /
• 2010

Multi-planar reformatting(MPR) is a volume rendering technique which generates images of sectional planes users define, so that it is essential for medical imaging system. Due to the recent advances of medical imaging system, users require to place plural planes on a single dataset and to enable an individual and easy control for each plane. In this paper, we enumerate various user operations for recent MPR and analyze user requirements to update the plane equation. For the effective control of coordinate system, each plane is considered in a separated coordinate system and all informations which form a coordinate system are grouped into two components: the individual components and the common components. The proposed system is implemented on a graphics hardware, so that it smoothly performs MPR including recent requirements.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.1
• /
• pp.149-159
• /
• 2008

In this paper, we propose a blind watermarking algorithm of 3d mesh model using spherical parameterization. Spherical parameterization is a useful method which is applicable to 3D data processing. Especially, orthogonal coordinate can not analyse the feature of the vertex coordination of the 3D mesh model, but this is possible to analyse and process. In this paper, the centroid center of the 3D model was set to the origin of the spherical coordinate, the orthogonal coordinate system was transformed to the spherical coordinate system, and then the spherical parameterization was applied. The watermark was embedded via addition/modification of the vertex after the feature analysis of the geometrical information and topological information. This algorithm is robust against to the typical geometrical attacks such as translation, scaling and rotation. It is also robust to the mesh reordering, file format change, mesh simplification, and smoothing. In this case, the this algorithm can extract the watermark information about $90{\sim}98%$ from the attacked model. This means it can be applicable to the game, virtual reality and rapid prototyping fields.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.137-149
• /
• 2023

In order to intuitively grasp the earth pressure direction acting on the structure and displacement state, displacement data in the horizontal and vertical directions were processed using the sigmoid function. A displacement coordinate system was set up for each axis. The system can intuitively check the current displacement and assess the management stage of each point. A displacement path can be compiled from continuously recorded points, allowing trends in the displacement's history and stress direction to be known. Analysis of data measured for excavated ground, found that displacement occurred in the direction of destressing at all points, and that the points' management state steady. Similar behavior trends were found among measurement points with high spatial correlation, whereas differing behavior trends occurred among measurement points with low spatial correlation. If the correlation analysis of the precursor and behavior area is performed using the continuously distributed surface settlement data and displacement coordinate system, it will be possible to predict the failure time and area.

• 한국지구과학회:학술대회논문집
• /
• 2005.09a
• /
• pp.103-111
• /
• 2005

최근의 급속한 기술 발달을 통해 고전적인 측량 기법을 극복한 3차원 레이저 스캐너를 댐 관리기법의 연구에 적용하였다. 다목적댐과 같은 대규모 댐의 경우, 댐체 변형 특성 파악 및 주변 사면 안정성 연구 등과 관련하여 많은 측량이 필요하지만, 주로 제한된 점 (point)자료를 획득하여 분석하는 데 그쳤다. 본 연구에서는 이를 극복하기 위하여 3차원 레이저 스캐너 장비를 도입하여 조사하고자 하는 대상체에 대해 3차원 디지털 좌표를 다량으로 획득하여 이를 분석 처리함으로써 보다 효율적으로 댐 관리가 이루어지도록 하였다. 본 연구에서는 보강 사면에 대한 변형 특성을 파악하기 위해, 7개월 간격으로 3차원 스캐닝을 통해 좌표 값을 획득하여 이의 분석을 통해 향후 거동에 대해 예측하였다. 분석을 위해 두 시기의 스캐닝 자료를 병합(registration)하여 상대차이를 분석하고, 틀어진 각을 측정하였다. 또한 도면이 존재하지 않는 지자체의 댐에 대한 신속 측량을 3차원 레이저 스캐너로 대체하기 위한 방안에 대해 제시하고, 준공예정인 댐에 대한 스캐닝을 수행하여 설계 도면과의 비교 검토 결과를 분석하였으며, 향후 다양한 이용 방안에 대한 검토와 토론을 제안하고자 한다.

• Journal of Biosystems Engineering
• /
• v.2 no.2
• /
• pp.15-36
• /
• 1977

일반적으로 기계의 분석법은 도해적 방법으로 대별할 수 있다. 도해적 방법이 간편하지만 그 정학성이 부정하고 해석적 방법은 복잡한 계산과정을 요구한다. 최근 많은 컴퓨터 시설은 해석적 방법의 활용을 가능케 하였으나 간단한 기구의 분석은 EH한 경제적인 면에서 컴퓨터의 광범위한 사용을 어렵게 하고 있다. 본 연구는 소형 계산기를 이용하여 크랭크로커 기구를 분석할 수 있는 분석적 방법을 위한 방정식을 유도하고 이 방법을 동력 이앙기의 직촌기구의 분석에 적용하였다. 기구 표시법으로 크랭크-로커 기구를 심볼 방정식으로 나타내고, 기구상의 각 링크에 고정된 좌표계를 3$\times$3행렬식을 이용하여 좌표계를 전이 시키는 방법으로 방정식들을 유도하였다. 크랭크-로커 기구의 링크상의 어떤 한점의 위치벡타를 행렬 방정식으로 표시하고 이 행렬 방정식을 일차, 이차 미분하여 그 점에 대한 속도와 가속도 방정식은 유도하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.05a
• /
• pp.487-490
• /
• 2021

최근 반려동물 관련 산업이 증가함에 따라 반려동물의 행동을 분석하는 연구가 진행되고 있다. 이를 바탕으로 본 논문에서는 반려동물 행동 분석을 통한 이상행동 예측 시스템을 제안한다. 이 시스템은 CCTV로부터 반려동물의 영상 데이터를 수집하고, YOLOv4(You Only Look Once version 4)를 통해 반려동물의 객체를 탐지한다. 행동을 분석하기 위해 탐지된 반려동물 객체를 DeepLabCut 딥러닝 알고리즘을 사용하여 관절 좌표 정보를 추출한다. 추출된 관절 좌표와 반려동물의 일반적인 행동을 매칭하여 이상행동을 예측하기 위한 DNN(Deep Neural Networks)의 입력 데이터로써 사용된다. 위 과정을 통해 반려동물의 전체적인 행동을 분석하여 이상행동을 예측한다. 이 시스템을 통해 반려동물의 행동을 분석하고 이상행동을 예측함으로써 반려동물 의료 관련 사업에도 적용될 수 있을 것이다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.581-588
• /
• 2018

The aim of this study is to propose a fine co-registration approach for multi-temporal satellite images acquired from RapidEye, which has an advantage of availability for time-series analysis. To this end, we generate multitemporal ortho-rectified images using RPCs (Rational Polynomial Coefficients) provided with RapidEye images and then perform fine co-registration between the ortho-rectified images. A DEM (Digital Elevation Model) extracted from the digital map was used to generate the ortho-rectified images, and the RNCC (Registration Noise Cross Correlation) was applied to conduct the fine co-registration. Experiments were carried out using 4 RapidEye 1B images obtained from May 2015 to November 2016 over the Yeonggwang area. All 5 bands (blue, green, red, red edge, and near-infrared) that RapidEye provided were used to carry out the fine co-registration to show their possibility of being applicable for the co-registration. Experimental results showed that all the bands of RapidEye images could be co-registered with each other and the geometric alignment between images was qualitatively/quantitatively improved. Especially, it was confirmed that stable registration results were obtained by using the red and red edge bands, irrespective of the seasonal differences in the image acquisition.