• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.621-628
• /
• 2017

The efficiency of implementation of the arithmetic operations in finite fields depends on the choice representation of elements of the field. It seems that from this point of view normal bases are the most appropriate, since raising to the power 2 in $GF(2^n)$ of characteristic 2 is reduced in these bases to a cyclic shift of the coordinates. We, in this paper, introduce our algorithm to transform fastly the conventional bases to normal bases and present the result of H/W implementation using the algorithm. We also propose our algorithm to calculate the multiplication and inverse of elements with respect to normal bases in $GF(2^n)$ and present the programs and the results of H/W implementations using the algorithm.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.1
• /
• pp.161-172
• /
• 2004

본 연구의 목적은 각기 다른 수직 점프 동작 시 근육의 길이와 근육의 수축속도 변화를 비교 분석하는데 있다. 피험자의 운동학적 변인들을 분석하기 위해 2대의 고감도 카메라를 (60 Hz, Panasonic AG455) 사용하여 점프 동작을 촬영하였다. 대퇴직근, 내측광근, 외측광근, 중간광근, 대퇴이두근(단두), 내측과 외측 비복근의 길이와 근수축 속도는 Brand et al. (1982)에 의해 제시되어진 하지근 기시 정지점의 3차원 좌표값과 동작분석을 통한 하지 분절간의 회전 및 변환행렬을 사용하여 측정되어졌다. 일반적인 근육 길이와 수축속도의 변화 형태는 각기 다른 점프간에 매우 유사한 형태를 보였다. 상승기 초기에 대퇴사두근의 길이가 최대인것으로 나타났으며, 이에 반해 대퇴이두근과 내외측 비복근은 공중 동작이 발생하는 시점에 근의 길이가 최대인 것으로 나타났다. 근육의 길이 변화 범위는 대퇴직근이 35.9에서 47.5 cm, 외측광근이 29.4에서 38.8 cm, 중간광근이 31.5에서 38.0 cm, 내측광근이 30.9에서 38.6 cm, 대퇴이두근이 21.3에서 39.1 cm, 외측비복근이 31.4에서 33.5 cm, 내측비복근이 30.5에서 33.2 cm인 것으로 나타났다. SQ와 CMJ에서는 대퇴사두근의 최대 단축성 수축 속도와 대퇴이두근과 내외측 비복근의 최대 신장성 수축이 공중동작이 발생하기 바로 전에 이루어졌다. 대퇴사두근의 최대 신장성 수축과 대퇴이두근과 내외측 비복근의 최대 단축성 수축은 일반적으로 피험자가 착지하는 순간에 발생되어졌다. 그러나 HJ와 DJ에서는 대퇴사두근의 최대 신장성 추축과 대퇴이두근과 내외측 비복근의 최대 신장성 수축이 하강기 초반에 발생되어졌다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.1
• /
• pp.37-45
• /
• 2008

This paper proposes a half-silvered mirror display system designed to demonstrate useful information about things on display into the air. It helps the spectators gain quick access to information near the area where the things are put on display. This paper deals with three matters: First, tracking based on camera images created in real time enables the provision of information about the things that are both still and moving. Second, as information is output based on the real-time coordinates of things on display, the parallel processing-based tracking algorithm is used to ensure smooth transfer. Third, a half-mirror is placed in front of the display area to establish an augmented reality system and visual distortion caused by mirror angle is adjusted by the reflection transformation matrix. The objectives of this system are to arouse the spectators' interest in things on display and offer easy and quick access to information about them.

• Journal of Broadcast Engineering
• /
• v.24 no.4
• /
• pp.580-591
• /
• 2019

This paper focuses on to improving object detection performance using the camera and LiDAR on autonomous vehicle platforms by fusing detected objects from individual sensors through a late fusion approach. In the case of object detection using camera sensor, YOLOv3 model was employed as a one-stage detection process. Furthermore, the distance estimation of the detected objects is based on the formulations of Perspective matrix. On the other hand, the object detection using LiDAR is based on K-means clustering method. The camera and LiDAR calibration was carried out by PnP-Ransac in order to calculate the rotation and translation matrix between two sensors. For Sensor fusion, intersection over union(IoU) on the image plane with respective to the distance and angle on world coordinate were estimated. Additionally, all the three attributes i.e; IoU, distance and angle were fused using logistic regression. The performance evaluation in the sensor fusion scenario has shown an effective 5% improvement in object detection performance compared to the usage of single sensor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.205-212
• /
• 2018

In order to overcome shortcomings of commercial analysis program for solving certain geotechnical problems, finite element method adopting isoparametric quadrilateral element was selected as a tool for analyzing soil behavior and calculating process was programmed. Two examples were considered in order to verify reliability of the developed program. One of the two examples is the case of acting isotropic confining pressure on finite element and the other is the case of acting shear stress on the sides of the finite element. Isoparametric quadrilateral element was considered as the finite element and displacements in the element can be expressed by node displacements and shape functions in the considered element. Calculating process for determining strain which is defined by derivatives using global coordinates was coded using the Jacobian and the natural coordinates. Four point Gauss rule was adopted to convert double integral which defines stiffness of the element into numerical integration. As a result of executing analysis of the finite element under isotropic confining pressure, calculated stress corresponding to four Gauss points and center of the element were equal to the confining pressure. In addition, according to the analyzed results for the element under shear stress, horizontal stresses and vertical stresses were varied with positions in the element and the magnitudes and distribution pattern of the stresses were thought to be rational.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_1
• /
• pp.705-714
• /
• 2019

Precision positioning is necessary for various use of high-resolution UAV images. Basically, GCP is used for this purpose, but in case of emergency situations or difficulty in selecting GCPs, the data shall be obtained without GCPs. This study proposed a method of improving positional accuracy for x, y coordinate of UAV based 3 dimensional point cloud data generated without GCPs. Road vector file by the public data (Open Data Portal) was used as reference data for improving location accuracy. The geometric correction of the 2 dimensional ortho-mosaic image was first performed and the transform matrix produced in this process was adopted to apply to the 3 dimensional point cloud data. The straight distance difference of 34.54 m before the correction was reduced to 1.21 m after the correction. By confirming that it is possible to improve the location accuracy of UAV images acquired without GCPs, it is expected to expand the scope of use of 3 dimensional spatial objects generated from point cloud by enabling connection and compatibility with other spatial information data.

• Journal of Broadcast Engineering
• /
• v.26 no.3
• /
• pp.247-257
• /
• 2021

This paper proposes a new technique for calibrating a multi-view RGB-D camera using a 3D (dimensional) skeleton. In order to calibrate a multi-view camera, consistent feature points are required. In addition, it is necessary to acquire accurate feature points in order to obtain a high-accuracy calibration result. We use the human skeleton as a feature point to calibrate a multi-view camera. The human skeleton can be easily obtained using state-of-the-art pose estimation algorithms. We propose an RGB-D-based calibration algorithm that uses the joint coordinates of the 3D skeleton obtained through the posture estimation algorithm as a feature point. Since the human body information captured by the multi-view camera may be incomplete, the skeleton predicted based on the image information acquired through it may be incomplete. After efficiently integrating a large number of incomplete skeletons into one skeleton, multi-view cameras can be calibrated by using the integrated skeleton to obtain a camera transformation matrix. In order to increase the accuracy of the calibration, multiple skeletons are used for optimization through temporal iterations. We demonstrate through experiments that a multi-view camera can be calibrated using a large number of incomplete skeletons.

• Radiation Oncology Journal
• /
• v.20 no.3
• /
• pp.283-293
• /
• 2002

Purpose : A PC based brachytherapy planning system was developed to display dose distributions on simulation images by 2D isodose curve including the dose profiles, dose-volume histogram and 30 dose distributions. Materials and Methods : Brachytherapy dose planning software was developed especially for the Ir-192 source, which had been developed by KAERI as a substitute for the Co-60 source. The dose computation was achieved by searching for a pre-computed dose matrix which was tabulated as a function of radial and axial distance from a source. In the computation process, the effects of the tissue scattering correction factor and anisotropic dose distributions were included. The computed dose distributions were displayed in 2D film image including the profile dose, 3D isodose curves with wire frame forms and dosevolume histogram. Results : The brachytherapy dose plan was initiated by obtaining source positions on the principal plane of the source axis. The dose distributions in tissue were computed on a $200\times200\;(mm^2)$ plane on which the source axis was located at the center of the plane. The point doses along the longitudinal axis of the source were $4.5\~9.0\%$ smaller than those on the radial axis of the plane, due to the anisotropy created by the cylindrical shape of the source. When compared to manual calculation, the point doses showed $1\~5\%$ discrepancies from the benchmarking plan. The 2D dose distributions of different planes were matched to the same administered isodose level in order to analyze the shape of the optimized dose level. The accumulated dose-volume histogram, displayed as a function of the percentage volume of administered minimum dose level, was used to guide the volume analysis. Conclusion : This study evaluated the developed computerized dose planning system of brachytherapy. The dose distribution was displayed on the coronal, sagittal and axial planes with the dose histogram. The accumulated DVH and 3D dose distributions provided by the developed system may be useful tools for dose analysis in comparison with orthogonal dose planning.