• Journal of Korean Society of Forest Science
• /
• v.48 no.1
• /
• pp.40-50
• /
• 1980

This research was carried out to examine the substitutional feasibility of low-priced materials produced in waste of forest instead of wheat flour which is extended for plywood adhesives. Wheat, pine bark, wood flour and pine foliage of coniferous trees or poplar foliage of hardwood species were selected and pulverized into 60-100 mesh minute powder after they were dried at $100-105^{\circ}C$ during 24 hours in the drying oven. The prepared particles as above were added to urea formaldehyde resin, urea-melamine copolymer resin and water soluble phenol formaldehyde resin in the ratio of 10, 20, 30 and 50%. After plywoods were processed by the above extending ratios, shear strength of extended plywoods were analyzed and discussed. The results obtained at this study were summarised as follows; 1. In the case of urea formaldehyde resin, both dry and wet shear strength of plywoods extended by wheat flour were shown the highest value. 2. Dry shear strength of urea-melamine copolymer resin was better than that of urea formaldehyde resin on the whole, while plywoods extended by wheat flour were shown excellent results. 3. Among 10% and 20% extensions of urea-melamine copolymer resin, the best results were shown by poplar leaves powder, wheat powder and wood flour. They had no significant difference statistically. 4. In the case of water soluble phenol formaldehyde resin, although dry shear strength of pine leaves powder was higher than that of wheat flour in the ratio of 10%, there was no significant difference between them in the ratio of 10 and 20%. 5. Among 20, 30 and 50% extensions of water soluble phenol formaldehyde resin, wet shear strength of wood flour and bark powder was higher than that of wheat flour. Wet shear strength of wood flour in the ratio of 10% was shown the same tendency as above.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.1
• /
• pp.39-49
• /
• 2015

Recently, carbon capture and storage (CCS) techniques have been globally studied. This study was conducted to use waste cement powder as an efficient raw material of mineral carbonation for $CO_2$ sequestration. Direct aqueous carbonation experiment was conducted with injecting pure $CO_2$ gas (99.9%) to a reactor containing $200m{\ell}$ reacting solution and the pulverized cement paste (W:C = 6:4) having particle size less than 0.15 mm. The effects of two additives (NaCl, $MgCl_2$) in carbonation were analyzed. The characteristics of carbonate minerals and carbonation process according to the type of additives and pH change were carefully evaluated. pH of reacting solution was gradually decreased with injecting $CO_2$ gas. $Ca^{2+}$ ion concentration in $MgCl_2$ containing solution was continuously decreased. In none $MgCl_2$ solution, however, $Ca^{2+}$ ion concentration was increased again as pH decreased. This is probably due to the dissolution of newly formed carbonate mineral in low pH solution. XRD analysis indicates that calcite is dominant carbonate mineral in none $MgCl_2$ solution whereas aragonite is dominant in $MgCl_2$ containing solution. Unstable vaterite formed in early stage of experiment was transformed to well crystallized calcite with decreasing pH in the absence of $MgCl_2$ additives. In the presence of $MgCl_2$ additives, the content of aragonite was increased with decreasing pH whereas the content of calite was decreased.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.263-271
• /
• 2015

Commercial AR(Alkali Resistant)-glass fiber has a good chemical resistant property, but also has a problem of difficulty in fiberizing process because of high viscosity in melted glass compare with E-glass fiber which is the most widely used for reinforced fiber of composite materials. In this study, we fabricated AR-glass fiber with low zirconia contents compare with commercial AR-glass fiber relatively, and measured properties against E-glass fiber. We obtained transparent clear glass with zirconia contents of 0.5~16 wt% by melting at $1600^{\circ}C$ for 2 hours. These AR-glass samples had high visible transmittance of 89~90 %, softening temperature of $703{\sim}887^{\circ}C$. And softening temperatures of them were increased according to the increasing zirconia contents. Compare with E-glass, AR-glass contains 4 wt% zirconia has different value of $-94^{\circ}C$ in softening temperature, $+68^{\circ}C$ at Log3 temperature and $-13^{\circ}C$ at Log5 temperature in viscosity. We could verify good alkali resistant property of the AR-glass fiber with SEM after dipping in alkali solution for 48~72 hours, and also high tensile strength, 1.7 times compare with E-glass fiber at 48 hours and 2.2 times at 72 hours. We conclude that this AR-glass fiber can be widely used as general alkali resistant glass fiber because of easy manufacturing condition and good properties even though it has low zirconia contents.

• The korean journal of orthodontics
• /
• v.37 no.6
• /
• pp.421-431
• /
• 2007

The objective of this study was to provide guidelines for the diagnosis and successful treatment of orthodontic treatment with upper premolar extraction only Methods: The sample group consisted of 40 patients (20 with upper premolar extraction only, 20 with both upper and lower premolar extractions) who showed an overjet of more than 7 mm and were finished successfully. Lateral cephalographs were taken before and after orthodontic treatment. Landmarks showing the position of the upper and lower incisors and the position of the upper and lower lip were determined and angular measurement of these values were obtained for statistical analysis (Mann-Whitney test). Results: At pre-treatment, the position of the lower incisor was less labially inclined and the convexity of the lower lip was smaller in the upper premolar extraction only group than in the upper/lower premolar extraction group. At post-treatment, there was no difference in all measurements except for the position of the lower incisor. A comparison of changes between pre- and post-treatment showed that the retraction of upper & lower incisors and the decrease in convexity of the lower lip were greater in the upper/lower premolar extraction group. Conclusions: Treatment by upper premolar extraction can be of benefit for patients whose lower incisor proclination and lower lip protrusion are not excessive.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.7
• /
• pp.1212-1217
• /
• 2004

The aim of this study was to investigate Quality characteristics of Pleurospermum kamtschaticum to increase the value of functional food resources. To examine Quality characteristics of Pleurospermum kamtschaticum, various factors such as color, texture, fiber, minerals, tannin, crude proteins, crude lipids and sensory quality, were determined using physicochemical methods. The contents of dietary fiber were 0.57％ and 0.54％ in each 100 g of leaf and stem parts (freeze drying base). In mineral content, potassium was the highest value in both of leaf and stem parts (freeze drying base). The contents of tannin were 108.1 $\mu$g/mL and 20.9 $\mu$g/mL in leaf and stem parts (fresh base) respectively. Blanching stems showed significant difference in hardness from freeze-drying leaves. The antioxidative activity in ethanol extracts of Pleurospermum kamtschaticum was investigated using peroxide value and free radical scavenging activity. Free radical scavenging activity in ethanol extracts of Pleurospermum kamtschaticum was 43.5％ in a 100 $\mu$g/mL level, and the antioxidative index was 1.09 in a 500 $\mu$g/mL level. For functional food using Pleurospermum kamtschaticum the contents of crude proteins and lipids were about 9％ and 26％, respectively. The results from sensory evaluation of each treatment older age showed a better acceptability.

• The Journal of the Korean bone and joint tumor society
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2004

Purpose: The current study was performed to analyze the oncological and functional results, and the patient, the limb and the prosthesis survival of osteosarcoma around the knee in children according to the treatment options. Materials and Methods: From 1982 to 2002, 63 patients with osteosarcoma around the knee underwent surgical treatments before 16 years of age. Surgical treatment options were amputation, endoprosthetic replacement, and implantation of low heat-treated autogenous bone graft after wide resection of tumor. The mean age of patients was 11.5 years (4.4~16), and the mean follow-up period was 6.1 years (2.1~16.8). All patients had neoadjuvant and adjuvant chemotherapy. All endoprosthses were extendible types. Anatomical locations of osteosarcoma were distal femur in 40 patients, and proximal tibia in 23 patients. As regard to Enneking stage, 4 patients had stage $II_A$, 50 patients had stage $II_B$, and 9 patients had stage III tumors. Results: The 5 year survival rate of stage $II_B$ patients was 72.7% in amputation, 83.7% in endoprosthesis, and 100% in low heat-treated autogenous bone graft. The 5 year survival rate of salvaged limb was 84.4% in endoprosthesis, and 80% in low heat-treated autogenous bone graft. The survival rate of prosthesis was 92.7% at 5 years, 67.4% at 10 years in endoprosthesis, and 75% at 5 years in low heat-treated autogenous bone graft. Mean functional outcome scores were 8.7 points in amputation, 20.6 points in endoprosthesis, and 16 points in low heat-treated autogenous bone graft. Distant metastasis occurred 15.8% in amputation, 27% in endoprosthesis and local recurrence occurred 8.1% in endoprosthesis, 14.3% in low heat-treated autogenous bone graft. Major complications happened 26.3% in amputation, 35.1% in endoprosthesis, and 28.6% in low heat-treated autogenous bone graft. Conclusion: Limb salvage procedure had functionally better results than amputation in children with osteosarcoma around the knee. Reconstruction with endoprosthesis after resection of tumor had good results in children as adults. In certain circumstances as too small bone for endoprosthesis or minimal bony destruction or too skeletally immature patient, low heat-treated autogenous bone graft may be a good treatment option. Low heat-treated autogenous bone graft may be considered as not only a substitute for endoprosthesis but also a temporary method before endoprosthesis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.504-509
• /
• 2018

The purpose of this study was to manufacture a high-performance titanium yellow pigment. Anatase type $TiO_2$ was the skeleton of the pigment and $Sb_2O_3$ is used as the color assistant for the coloring agent, $Cr_2O_3$. Mixed raw materials for the pigment were $TiO_2$(98%), $Sb_2O_3$(99.5%), and $Cr_2O_3$(99.5%). The raw materials were mixed by a dry process and crystallized by calcination at $1,000{\sim}1,200^{\circ}C$. The crystalline material was pulverized in a Jar Mill under $1{\mu}m$ by a wet process and dried for 12 hours at $100^{\circ}C$. The pigment was finally made by a fine grinding process. To determine the best temperature for calcination, 4 temperature sections ($1000^{\circ}C$, $1100^{\circ}C$, $1150^{\circ}C$, and $1200^{\circ}C$) were set up. The X-ray diffraction peak of the rutile crystalline structure was highest at $1,150^{\circ}C$. The yellow ceramic pigment, which has the rutile structure, was applied for coating materials. The synthesized pigments underwent a discoloration tests on the acid resistance, alkaline resistance, weather resistance and heat resistance. In addition, a detection test on harmful heavy metals ($Cr^{+6}$) was done. The resulting values (${\Delta}E$) of the weather resistance test (2000hr), acid resistance test, alkaline resistance test, and heat resistance test were 0.74, 0.16, 0.07 and 0.29. The resulting value for heavy metals testing was 34ppm.

• Restorative Dentistry and Endodontics
• /
• v.33 no.2
• /
• pp.133-140
• /
• 2008

The purpose of this study was to compare the apical micro leakage in root canal filled with Resilon by several self-etching primers and methacrylate-based root canal sealer. Seventy single-rooted human teeth were used in this study. The canals were instrumented by a crown-down manner with Gate-Glidden drills and .04 Taper Profile to ISO #40. The teeth were randomly divided into four experimental groups of 15 teeth each according to root canal filling material and self-etching primers and two control groups (positive and negative) of 5 teeth each as follows: group 1 - gutta percha and $AH26^{(R)}$ sealer: group 2 - Resilon, $RealSeal^{TM}$ primer and $RealSeal^{TM}$ sealer: group 3-Resilon, Clearfil SE $Bond^{(R)}$ primer and $RealSeal^{TM}$ sealer group 4-Resilon, $AdheSe^{(R)}$ primer and $RealSeal^{TM}$ sealer. Apical leakage was measured by a maximum length of linear dye penetration of roots sectioned longitudinally by diamond disk. Statistical analysis was performed using the One-way ANOVA followed by Scheffe's test. There were no statistical differences in the mean apical dye penetration among the groups 2, 3 and 4 of self-etching primers. And group 1, 2 and 3 had also no statistical difference in apical dye penetration. But, there was statistical difference between group 1 and 4 (p < 0.05). The group 1 showed the least dye penetration. According to the results of this study, Resilon with self-etching primer was not sealed root canal better than gutta precha with $AH26^{(R)}$ at sealing root canals. And there was no significant difference in apical leakage among the three self-etching primers.

• Korean Journal of Agricultural Science
• /
• v.9 no.2
• /
• pp.467-483
• /
• 1982

Leaflets of Allium sativum L. (garlic) and leaf scales Allium cepa L. (onion) were cultured on the Murashige and Skoog(MS) medium to study the effects of plant growth regulators, temperature and light on the formation of shoot and root. And also, the potentiality of shoot or root formation of tissues in accordance with the leaf age and the region was discussed. In the experiment with garlic, the formation of shoot and root was more effective on the medium containing $BA\;2mg/{\ell}$ and $NAA\;1mg/{\ell}$ and it occured on the basal region of outer leaflets. The shoot formation was more effective at $20^{\circ}C$ than $28^{\circ}C$ under 16-hour daylength, and it was more effective in darkness than light condition at $28^{\circ}C$. The results of shoot and root formation on the new cloves of garlic harvested in 1982 were similar to those the old cloves of garlic harvested in 1981. In the experiment with leaf seales of onion, when the tissues of dormant leaf scales of onions harvested in 1981 were explanted on the MS medium, a few shoots were formed on the medium containing $BA\;2mg/{\ell}$ and $NAA\;1mg/{\ell}$. In this case,there were no differences on the shoot formation among the age and region of leaflets. On the culture of leaf scales, the shoot was not formed on the leaf scales located at outer or middle region, but it was formed on the medium containing BA accompanied with NAA at inner scales. On the medium complemented with BA alone, the tissues were not differentiated, but on the medium complemented with NAA, the callus was formed from tissues and then the root was formed through the callus.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.197-204
• /
• 1987

In order to know the growth of suspended cells by explant sources, the change of nitrogen contents of cultured cells following the growth periods, capability of micro-callus formation according to cell plating methods, growth of suspended cells on various media, and efficiency of micro-callus formation by using growth regulators and different N strengths were investigated. 1. When suspension culture was tried by using the callus induced from internode and petiole, cell fresh weight and packed cell volume increased with similar way and the growth reached at stationary phase after 12 culture days. 2. N-contents of cultured cells increased upto 3 days and decreased around 6days. But the values increased again upto 9 days, after that they showed gradual decreases. 3. Of cell plating methods, embedding method was the best for micro-callus formation. 4. Growth of suspened cells showed the rest performanoes, when they were cultured on LM medium with 1/2N strengths and BAP 0.01.2.4-D 0.1, and NAA $1.0mg/{\ell}$, after 15 cultured days(upto 76.9 folds). LM medium was better than MS or GD. The combination of auxin and cytokinin was better for cell growing than auxin-treatment only. 5. Micro-callus from single cell and small cell aggregates was formed only on MS and LM media with 2,4-D $1.0mg/{\ell}$.