• Journal of Biomedical Engineering Research
• /
• v.25 no.1
• /
• pp.1-4
• /
• 2004

On the background of general idea and technique of bioscience, medicine and engineering, tissue engineering aim at maintenance, improvement and repair of human body function through manufacturing and transplantation of artificial tissue and organ exchangeable human body. Basic material used in the area is scaffold that aid tissue and organ formation. Making scaffold, solvent-casting and particulate leaching technique is widely used in manufacturing of porous polymer scaffold. There are many types of particle including salt and gelatin. Salt is a most commonly used particulate because it is easily available and very easy to handle and gelatin particle is another candidate for this method because it is known as a material, which enhances cell attachment and proliferation. But there is no comparative study of two kinds of materials. In this study we compared the biocompatibility of the two scaffolds made from salt(salt scaffold) and gelatin particle (gelatin scaffold). These results demonstrated that gelatin scaffold showed better attachment of cells at the initial stage and better proliferation of cells. The better performance of gelatin scaffold is contributed to the better connection of pores in the same porosity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.1
• /
• pp.1-8
• /
• 1984

The tools and techniques for measuring the spectral distribution of light emitted by, transmitted by, or reflected from food surfaces are described for determining the extent to which original natural color is preserved in processing and subsequent storage of foods. Color differences may be evaluated indirectly in terms of some physical characteristic of the sample or extracted fraction thereof that is largely responsible for the color characteristics. For evaluation more directly in terms of what the observer actually seen, color differences are measured by reflectance spectrophotometry and photoelectric colorimetry and expressed as differences in psychophysical indexes such as luminous reflectance and chromaticity. The standard system, against which other systems could be compared, is the one recommended by the International Committee on illumination and which is based on the 'standard observer', which is a simulated standard eye, consisting of three primary color filters Z, with X being essentially amber in color, Y, green and Z, blue. Any spectrophotometric curve of reflectance obtained from the surface of an object can be integrated in terms of X, Y and Z. Psychophysical notation may be converted by standard methods to the colorimetrically more descriptive terms of Munsell hue, value and chroma.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.85-88
• /
• 2008

Performance evaluation of RC bridge piers repaired by CFRP has been investigated. For this purpose, simplified CFRP stress-strain relationship has been proposed and use is made of inelastic time-dependent element developed by authors. Static time-history analysis has been carried out for a RC bridge pier repaired with CFRP. Analytical predictions shows a relatively good correlation with experimental results. In addition, in case of dynamic time-history analysis, effect of the CFRP repair intervention on shear has been evaluated. Comparative analysis reveals that a repaired member produces increased characteristics due to the repair intervention and may affect the overall response of a whole structure. Moreover, effect of shear significantly affect strength, stiffness and displacement response of the pier. In all, It is believed that the present analytical model and scheme enable a healthy evaluation of strength, stiffness and displacement capacities of a RC bridge pier being damaged and repaired.

• Journal of the Korean Ceramic Society
• /
• v.36 no.1
• /
• pp.7-14
• /
• 1999

TiZrB2 solid solution was synthesized using fine powders of Ti, Zr and B by SHS microwave process. The characterization of the synthesized powder and sintered bodies ws investigated. The combustion temperature and rate were increased with increasing the mole ratio of Zr in temperature profile, and showed the maximum combustion temperature and velocity values of 285$0^{\circ}C$ and 14.6mm/sec in Ti0.2Zr0.8B2 composition. Phase separation has been occured into a composite with TiB2 and ZrB2 phases from TiZrB2 solid solution, which was hot pressed sintering at 30 MPa for an hour at 190$0^{\circ}C$. At the composition of Ti0.8Zr0.2B2 the best properties has been obtained in relative density, bending strength, fracture toughness and hardness, with 99%, 680 MPa, 7.3MPa.m1/2 and 2750 Kg/$\textrm{mm}^2$ respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.1
• /
• pp.5-12
• /
• 2000

As a semiconductor material for electronic devices operated under extreme environmental conditions, silicon carbides (SiCs) have been intensively studied because of their excellent electrical, thermal and other physical properties. The growth characteristics of single- crystalline 6H-SiC homoepitaxial layers grown by a thermal chemical vapor deposition (CVD) were investigated. Especially, the successful growth condition of 6H-SiC homoepitaxial layers using a SiC-uncoated graphite susceptor that utilized Mo-plates was obtained. The CVD growth was performed in an RF-induction heated atmospheric pressure chamber and carried out using off-oriented ($3.5^{\circ}$tilt) substrates from the (0001) basal plane in the <110> direction with the Si-face side of the wafer. In order to investigate the crystallinity of grown epilayers, Nomarski optical microscopy, transmittance spectra, Raman spectroscopy, XRD, Photoluninescence (PL) and transmission electron microscopy (TEM) were utilized. The best quality of 6H-SiC homoepitaxial layers was observed in conditions of growth temperature $1500^{\circ}C$ and C/Si flow ratio 2.0 of $C_3H_8$ 0.2 sccm & $SiH_4$ 0.3 sccm.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.2
• /
• pp.21-29
• /
• 2014

The use of filling material based on cement paste is inefficient at field construction because it needs a lot of the charging mass. In addition, it has environmental problem according to the large amount of cement use because its strength is also larger than criterion. The excavated soil with stabilizer can be used as the filling materials when the bored pile is constructed. Therefore, this paper describes field application of solidified soil for economical efficiency and environment-friendly. The static axial load tests and the load-transfer measurements were performed to examine the axial resistant behavior of the piles. As results, the flowability, segregation and bleeding, and bond strength of filling materials was a good performance than that of the existing cement paste. But the skin friction of pile by PDA was slightly decreased than that of the existing cement paste. However, as pile filling materials, and in terms of economics and environment, the applicability of filling material is considered very effective.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.779-783
• /
• 2002

The dielectric breakdown of epoxy composites used for transformers was experimented and then its data were simulated by Weibull distribution probability. As a result, first of all, speaking of dielectric breakdown properties, the more hardener increased the stronger breakdown strength at low temperature because of cross-linked density by the virtue of ester radical. And the breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised, the electric field is concentrated, and the acceleration of electron and the growth of electron avalanche are early accomplished. In the case of filled specimens with treating silane, the breakdown strength become much higher since this suggests that silane coupling agent improves interfacial combination and relaxs electric field concentration. Finally, from the analysis of weibull distribution, it was confirmed that as the allowed breakdown probability was given by 0.1%, the applied field value needed to be under 21.5MVcm.

• Journal of Convergence for Information Technology
• /
• v.8 no.2
• /
• pp.83-90
• /
• 2018

We have studied the optimal conditions for design and development on the communication device for a bilateral, and it's electrodes for transmitting electric signal are constructed on the $36^{\circ}$ rotated $LiTaO_3$ substrate by evaporating Al-Cu(W 30%) alloy. At first, we manufactured three kind of samples using this method, and selected two samples as similar with frequency, ripple and passband characteristics, and then we connect two samples by series in order to make bilateral devices. As results, we obtained that the electrode structure has better characteristics then the others, when it's width of reflector and electrode are $1{\lambda}/4$, $1{\lambda}/12$ respectively, and it's frequency is approximately 190.3MHz. Near future, I hope to help the manufacture for communication devices for the multi-channel and the duplex filter.

• Culinary science and hospitality research
• /
• v.21 no.5
• /
• pp.171-179
• /
• 2015

This study was conducted to investigate the antioxidant activity and the bioactive compounds found in 70% ethanol extracts taken from Sanguisorbae officinalis L. leaves(SO) cultivated in Korea. The extracts were tested for their total phenolic contents (TPC), total flavonoid contents (TFC), phenolic compounds, and antioxidative activities using various in vitro assay such as DPPH, ABTS radical scavenging activity, FRAP activity, and reducing power. The TPC and TFC were found to be $119.3{\pm}1.54mg$ gallic acid and $59.6{\pm}1.43mg$ rutin at mg of 70% ethanol extracts, respectively. Catechin was the major material among the phenolic compounds in SO extracts. The DPPH radical scavenging activity, ABTS radical scavenging activity, FRAP activity, and reducing power of SO extracts were increased in a dose-dependent manner. These results suggest that SO extracts could be considered as a good source of natural antioxidants and functional food ingredient.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.126-126
• /
• 1999

본 실험의 목적은 FED의 상부, 하부 전극으로 사용되는 Mo를 건식, 습식 식각함으로써 DED 소자의 공정을 개발하는 것이다. Mo는 $261^{\circ}C$의 높은 융점을 지니고 있으며, 우수한 열적 안정성과 비교적 낮은 비저항을 가지는 재료로써 FED와 같은 전계 방출 소자의 cathod 팁 및 전극물질로 사용되어지는 가장 보편적인 물질이다. FED와 같은 전계방출소자가 갖추어야 할 요건은 전자 방출 영역이 소자 동작시 변형되지 않아야 하고, 기계적 ,화학적, 열적 내구성이 좋아야 함인데 이러한 요건을 충족시킬 수 있고 가장 범용적으로 사용되는 물질이 Mo이다. 실험에서 사용된 Mo는 DC magnetron sputter를 사용하여 Ar 가스를 첨가하여 5mTorr하에서 Si 기판위에 증착속도를 300$\AA$/min로 하여 1.6$\mu\textrm{m}$ 증착하였다. 본 실험의 Mo 식각은 고밀도 플라즈마원인 ICP를 이용하였다. 식각특성은 식각 가스조합, inductive power, bias voltage, 공정 압력의 다양한 공정 변수에 따른 식각특성 변화를 관찰하였다. 식각시 chlorine 가스를 주요 식각 가스로 사용하고 BCl3, O2, Ar을 첨가가스로 사용하였으며, inductive power는 300-600, bias voltage는 120-200V 사용하였고 압력은 15-30mTorr, 기판온도는 7$0^{\circ}C$로 유지하였으며 식각마스크로는 electron-beam evaporator로 1$\mu\textrm{m}$ 증착한 SiO2를 patterning하여 사용하였다. 식각속도는 stylus profiler를 이용하여 측정하였으며 식각후 profile은 scanning electron microscopy (SEM)을 통하여 관찰하였다. 실험 결과 순수한 Cl2 BCl3 가스만을 사용한 경우 보다는 Cl2 가스에 O2를 첨가하였을 때 좋은 선택비를 얻었다. 또한, inductive power와 bias voltage, Mo의 식각속도의 적절한 조절을 통해 SiO2에 대한 선택도를 변화시킬 수 있었다. Cl2:O2비를 1:1로 하고 400W/-150V, 20mTorr의 압력, 7$0^{\circ}C$ 기판온도에서 식각시 200$\AA$/min의 Mo 식각속도, SiO2와의 선택비 8:1을 얻을 수 있었다. 또한 실제 FED 소자 구조형성에 적용한 결과 비등방적인 식각형상을 형성할 수 있었다.