• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.674-677
• /
• 2010

본 논문에서는 지반에 매립된 파이프에서 전파되는 유도초음파의 종파 모드 특성을 분석하였다. 지상 배관과는 달리 매립 배관에서는 주변 매질로 유도초음파의 누설이 발생할 수 있으며, 이로 인하여 유도초음파의 감쇠가 상대적으로 커질 수 있다. 따라서 본 연구에서는 유도초음파의 여러 특성들 중 종파 모드의 감쇠 특성을 중점적으로 분석하였다. 감쇠에 영향을 미치는 지반의 파동 특성(밀도, 체적종파속도, 체적횡파속도)을 결정하기 위하여 포화도와 다짐을 고려하였다. 포화도가 증가할수록 지반의 체적종파속도와 체적횡파속도는 감소하며, 다짐된 지반은 밀도와 체적종파속도, 체적횡파속도를 증가시킨다. 이와 같은 조건으로 결정된 지반의 파동 특성치와 배관의 물성치를 바탕으로 유도초음파 종파 모드의 감쇠 곡선을 계산하고, 특성을 분석하였다. 결과적으로 포화도가 증가할수록 종파 모드의 감쇠는 감소하는 경향을 나타내었고, 다짐이 증가할 경우 감쇠는 전반적으로 증가하는 경향을 나타냄을 알 수 있었다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.4
• /
• pp.266-272
• /
• 2016

This paper presents the investigation of the propagation behavior of bulk longitudinal waves generated by an ultrafast laser system in thin films. A train of femtosecond laser pulses was focused onto the surface of a 150-nm thick metallic (chromium or aluminum) film on a silicon substrate to excite elastic waves, and the change in thermoreflectance at the spot was monitored to detect the arrival of echoes from the film/substrate interface. The experimental results show that the film material characteristics such as the wave velocity and Young's modulus can be evaluated through curve-fitting in numerical solutions. The material properties of nanoscale thin films are difficult to measure using conventional techniques. Therefore, this research provides an effective method for the nondestructive characterization of nanomaterials.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.4
• /
• pp.259-269
• /
• 1999

Elastic wave velocity measurement technique such as impact-echo method and ultrasonic pulse velocity method has been successfully used to evaluate the moduli and strength of concrete. However, estimation results obtained by the NDT methods do not agree well with real things because longitudinal wave velocity is influenced by various factors. In this paper, among several factors influencing P-wave velocity, the influence of moisture content in concrete was investigated through the experiment. Test results show that longitudinal wave velocity is significantly affected by the moisture content of concrete, i.e., the lower moisture content. the lower velocity. Moisture content influences rod-wave velocity measured by impact-echo method stronger than ultrasonic pulse velocity measured by transmission method. During drying process with ages. the difference of increasing rate between longitudinal wave velocity and compressive strength of concrete is gradually increased. Therefore, to establish more accurate relationship between longitudinal wave velocity and strength, the difference of the increasing rate should be considered.

• Journal of the Korean earth science society
• /
• v.22 no.1
• /
• pp.20-29
• /
• 2001

P wave traveltime delays has been measured and a preliminary tomouaphic inversion has been performed using the data collected from the network deployed by Korea National University of Education in the southcentral part Korea. The maximum variation in relative traveltime residuals is almost 0.7 seconds. A large azimuthal variation in traveltime residuals is observed at the stations in the northwestern part of the study area. This might indicate the existence of lateral velocity heterogeneity beneath the study area. Although, the inverted tomographic image seems to be correlated with the tectonic boundary between Kyunggi Massif and Okcheon Belt, the confidence level is presently low. We should place on the importance of this study for finding preferable inversion parameters and predicting probable result. Better tomographic image of the study area can be obtained in the near future when the data are accumulated.

• Composites Research
• /
• v.13 no.2
• /
• pp.1-7
• /
• 2000

A new ultrasonic test method is proposed to obtain elastic constants of unidirectional composite materials nondestructively. In the proposed test method, only longitudinal transducers are used to measure wave velocities by through-transmission method. An aluminum wedge and a flat aluminum rectangular block are placed on each side of the test specimen. Oblique incident longitudinal wave is transmitted from a wedge to the specimen and the mode conversions are occurred sequentially at two interfaces between the specimen and aluminium. Measuring wave velocities converted to longitudinal waves in the rectangular block give all information to determine elastic constants of the composites. In order to determine shear stiffness coefficients, transverse wave velocity is measured indirectly from received longitudinal wave. Effects of anisotropy on waves are also considered in this study.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.303-306
• /
• 2000

복잡한 형상을 지닌 터빈 블래이드의 결함을 검사하기 위해 현재 $35^\circ,\; 38^\circ,\; 40^\circ$의 횡파 굴절각을 지닌 탐촉자를 사용하고 있다. 이와 같은 굴절각은 초음파 빔의 경로를 Snell의 법칙에 의해 설정하고 있다. 그러나 터빈 블래이드 검사용 초음파 탐촉자를 제작하는 과정에서 $35^\circ$의 횡파 굴절각을 갖는 경사각 탐촉자는 제작이 어려움을 알았다. 이러한 원인은 철강재료의 종파임계각이 $33.2^\circ$의 횡과굴절각에 대응되며, 종파임계각 근처에서는 전반사 현상 때문에 에너지 투과율이 매우 작아 실제 시험대상체에 입사되는 에너지가 거의 없으며 또한 횡파굴절각이 약 $37.5^\circ$ 일때에 휭파의 에너지 투과율이 최대가 되어 wedge를 $37.5^\circ$ 이하의 횡파굴절각을 갖도록 설계하더라도 측정을 하면 $37.5^\circ$ 근처의 횡파굴 절각을 갖게된다. 즉, 종파임계각 근처에서는 전반사 현상에 의해 경계면에서의 에너지 투과가 매우 작아 횡파 굴절각은 Snell의 법칙이 아닌 초음파 에너지의 투과 정도를 나타내는 echo transmittance의 크기에 의해 결정된다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.1
• /
• pp.40-45
• /
• 2008

Immersion ultrasonic testing (UT) was used to determine elastic moduli of solid materials instead of the widely-used contact UT method. Conventionally, immersion UT is only used for determining the longitudinal wave speed. However, in this research, transverse wave speed was measured through finding transverse wave echoes caused by mode-conversion at material's boundary. Also, even in the cases when wave speeds could not be determined due to unknown thickness, Poisson's ratio was able to be calculated from the ratio of longitudinal and transverse wave speeds. This technique was verified for several materials, and it was found that higher accuracy was obtained by immersion UT method for materials either with relatively high wave speed or with relatively small Poisson's ratio. This technique thus will be suitable fur ceramics or high strength materials.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.4
• /
• pp.171-177
• /
• 2008

In this paper, we have measured the fundamental properties of chime stone for Pyeongyeong. The properties are measured by wave propagation in the stone without destroying the stones, the measured properties are the chime stone density, natural frequencies of extensional wave and bending wave, and Young's modulus which is calculated by the measured properties. To find a value for Young's modulus, the fundamental frequencies which are obtained through spectrum analysis of extensional wave and bending wave are used. We calculated Young's modulus of chime stone by theoretical study and measurement on extensional wave and bending wave of the beam. As a result, we obtained Young's modulus by the fundamental frequencies of extensional wave and bending wave which deviation is within 2%.

• The Journal of Engineering Geology
• /
• v.2 no.1
• /
• pp.36-46
• /
• 1992

Granite core samples and bulk samples were first subjected to petrographic examination to determine weathering degrees. Secondly, their physical or mechanical properties including specific gravity, porosity, sonic wave velocity and uniaxial compressive strength were measured. The results were correlated to investigate the influences between properties including physical and mechanical properties, weathering degrees, and rock textures. Porosity and P wave velocity were found the most useful indices in determining the weathering degrees of granites.

• The Journal of Engineering Geology
• /
• v.23 no.3
• /
• pp.235-246
• /
• 2013

P-wave velocity was measured by the low frequency flaw detector in order to analyze the weathered state of a halo stone Buddha, Unju temple, Hwasun, Korea. By the results of laboratory tests on a fresh acidic tuff with the same rock of a halo stone Buddha, average absorption, average P-wave velocity, and average uniaxial compressive strength were 5.38%, 4,008 m/s, and 70.1 MPa, respectively. The results correspond to moderately strong rock. Average P-wave velocity of a halo stone Buddha measured by the low frequency flaw detector was 2,257 m/s in the left zone, 3,437 m/s in the right zone, and 2,802 m/s overall. Weathering index of a halo stone Buddha was 0.45 in the left zone, 0.21 in the right zone, and 0.33 overall. Comparing the results of a halo stone Buddha with them of laboratory tests, weathered state of a halo stone Buddha was analyzed highly weathered state in the left zone and moderately weathered state in the right zone. Furthermore, it suggests that the left zone of a halo stone Buddha was affected weathering more than the right one. Overall a halo stone Buddha corresponds to moderately weathered state of weathering degrees. In conclusion, it is considered that low frequency flaw detector may be applicable as a valuable method on analyzing the P-wave velocity of the stone cultural heritage with an irregular surface.