• Journal of Convergence for Information Technology
• /
• v.12 no.5
• /
• pp.100-106
• /
• 2022

A longitudinal study refers to a research method based on longitudinal data repeatedly measured on the same object. Most of the longitudinal analysis methods are suitable for prediction or inference, and are often not suitable for use in exploratory study. In this study, an exploratory method to analyze longitudinal data is presented, which is to find the longitudinal trajectory after determining the best number of clusters by clustering longitudinal data using self-organizing map technique. The proposed methodology was applied to the longitudinal data of the Employment Information Service, and a total of 2,610 samples were analyzed. As a result of applying the methodology to the actual data applied, time-series clustering results were obtained for each panel. This indicates that it is more effective to cluster longitudinal data in advance and perform multilevel longitudinal analysis.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.157-165
• /
• 2007

In this research, a vertical alignment analysis algorithm was developed. The developed algorithm used acquired data from a vehicle with multiple sensors such as a global positioning system (GPS) an inertial navigation system (INS), and a distance measuring unit (DMI) to collect information about vehicle position and altitude. The vertical alignment analysis algorithm includes the identification of vertical tangent sections, the beginning and ending points of vertical curves, and the calculation of length of vortical curves. Also, the algorithm can help build models for vertical tangent sections and vertical curve sections. In order to verify the algorithm, a field survey was conducted at an actual highway section and the result of the field survey was compared to a highway CAD drawing.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.548-553
• /
• 2016

본 연구는 타원형 물체가 유체 중에서 침강할 때 물체의 형상과 밀도에 따른 침강특성을 분석하는 것이며, 이로 인해 종단속도에 미치는 영향을 평가하는 것이다. 복잡한 형태의 물체를 타원기둥으로 단순화하였고, 낮은 Reynolds 수(=0.5~100)에 대하여 연구를 진행하였다. 또한 침강형태가 종단속도에 미치는 영향을 연구하였다. 수치해석 검증을 통해 정확하고 효율적인 격자 크기를 결정하였다. 정확한 분석을 위해 단순히 종단속도의 변화를 본 것이 아니라 진동하지 않은 물체의 이론적 속도와 비교하여 이와 얼마나 차이가 있는지를 확인하였다. 수치해석 결과 장단축비에 따라 물체의 침강특성이 크게 변하였고 그 경향은 밀도비에 따라 다른 양상을 보였다. 또한 각의 진동에 대한 진폭과 진동수가 물체의 침강속도에 영향을 주는 것을 확인하고 그 원인에 대해서도 연구하였다.

• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.1
• /
• pp.86-95
• /
• 2010

Flight termination system(FTS) is used to terminate safely the launch vehicle's flight when it faces an emergency situation by transmitting termination command from ground FTS. RCC standard IRIG tone method has been used widely for FTS commands method in foreign ranges and Naro Space Center, but this method has a weakness for security of command signal. Therefore RCC had studied more secured EFTS standard and chose CPFSK digital modulation method. This paper describes basic concept and types of FTS and FTS types which foreign ranges had applied and describes standardization of EFTS in the U.S. based on RCC EFTS study reports.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.79-90
• /
• 2007

In determining vertical grades in highway alignment design, engineers usually consider heavy vehicle performances on the upgrade. Heavy vehicles usually experience speed reduction on the upgrade and with recent years weight/horsepower improvements for heavy vehicles the speed reduction shows some change. However, in spite of the weight to horsepower improvements for the design vehicles from 300lb/HP to 200lb/HP in the AASHTO, there was no change in the maximum vertical grades. Therefore, a review of the maximum vertical grade reflecting existing heavy vehicle performances is required. In particular, in South Korea where highways pass through lots of mountaineous terrain, the maximum vertical grades must be reviewed throughly. In this study the amount of heavy vehicle performances during past decades were investigated and their expected impacts on highway vertical alignment designs were subsequently analyzed. A worldwide terrain analysis and international design standards were compared to set South Korean vertical grade standards. Traffic flow simulation Vissim was utilized to simulate vehicular flows on the upgrade and new truck performance curves on the grades were developed. Based on the new curve, it was decided that $1{\sim}2%$ increase of the maximum vertical grades could be allowed.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.199-200
• /
• 2015

도시부 교차로의 설계는 지방부 교차로와 근본적으로 달라야 하나, 현행 도시부 교차로 설계는 지방부 교차로 설계기준을 준용하고 있다. 본 연구는 도시부 및 지방부 교차로의 차이점을 비교 분석하고, 국내외 교차로 종단경사 설계기준을 검토한 후 적정 설계기준(안)을 적용한 후, 이를 통계적 분석기법을 활용하여 검증하여 설계기준을 정립하는 순으로 진행 하였다. 분석결과 정면충돌사고율과 차대차추돌사고율이 종단경사와 상관관계가 있는 것으로 나타났다. 이러한 연구를 통해 적정 교차로 종단경사를 적용한 설계가 이루어져야 함을 확인 할 수 있었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.2
• /
• pp.157-166
• /
• 1996

This paper presents the optimum termination method of a TEM Cell, which utilizes hybrid distributed termination resistor array networks. Current stream on the septum, and on the terminal end of a TEM Cell is analyzed by numerical analysis. By circuit analysis, the optimum resistor array network is designed based on the result of the analysis, which assures efficient power dissipation, and current stream traveling straight and uniform. Thermovision photos were taken for comparing the conventional termination network on which each resistor is arranged at regular intervals, with the suggested optimum termination network on which each resistor is arranged for current distribution. The comparison of the results of thermovision photos shows a good agreement with those obtained by numerical analysis.

• The Journal of Korean Association of Computer Education
• /
• v.23 no.1
• /
• pp.53-61
• /
• 2020

In the information society, the ability of learners to use computers to conduct self-directed learning is important. Indeed, the higher the computer's ability to use computers, the more the academic achievement needs to be analyzed. The purpose of this study was to identify longitudinal trajectories of student awareness of ICT literacy and frequency of computer use. We also examined the effects of the longitudinal patterns on academic achievement and college major choice. A non-parametric approach, K-means for longitudinal data(KML) algorithm, was conducted using 9-year longitudinal data from Seoul Education Longitudinal Study (2010-2018). Findings indicated that a pattern presenting a higher awareness of ICT literacy and frequency of computer use showed better academic achievements and was likely to prefer to choose engineering-related majors.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.153-162
• /
• 2005

This study is carried out to evaluate the sight distance change due to construction errors of vertical crest curves. Various design speeds and grades as well as various size of construction errors are incorporated in this study. After showing theoretical methodology numerical results are compared and analysed for the given ranges of parameters. New vertical curve change rate(m/%) is suggested to guarantee minimum sight distance under construction errors. As to the results, the reduction of sight distance are $2.8{\sim}21.3m$ at 120km/h, $2.0{\sim}15.1m$ at 100km/h, $1.4{\sim}10.6m$ at 80km/h, $1.0{\sim}7.5m$ at 60km/h $0.5{\sim}3.9m$ at 40km/h. Vortical curve change rates need to be increased about $6{\sim}25%$ to provide minimum stopping sight distance according to design speed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.469-472
• /
• 2000

인터넷 사용자의 급속한 증가와 전자 상거래의 발전은 다양한 시스템 및 네트워크의 설계 및 관리를 매우 복잡하게 변화시켰다. 본 연구에서는 인터넷/ 인트라넷과 같은 분산 망에서의 서비스 보장을 위해 종단 시스템(End-to-End System)에서의 QoS(Quality of Service) 지원과 QoS 제어 메커니즘을 분석하여 분산 망에서의 종단 사용자(End-User)를 위한 QoS 정책 관리 구조를 제안하였다. 이 구조는 종단 호스트 모델과 네트워크 모델의 통합 지원 구조로 구성되며, 각 모델의 해당 자원에 대한 서비스를 구분하여 사용자 정책을 관리하며, 분산 망에 대해서는 단위 네트워크의 QoS 관리 서버를 통하여 종단 시스템간의 QoS 정책을 관리하게 된다. 본 논문에서 제안한 구조는 분산 망에서의 종단 사용자 정책을 관리하는데 있어 응용 서비스 고유의 특성을 보장하며 사용자 정책에 따른 서비스 자원을 통합 관리할 수 있다.