• Journal of Forest and Environmental Science
• /
• v.20 no.1
• /
• pp.93-109
• /
• 2004

To provide the basic informations related to forest road construction of mountainous terrain, we analyzed changes of the road structure factors such as banking and cutting slope gradients, slope length, road width by the environmental factors such as locations, slope gradients, soil types, road position on physically stabilized forest roads constructed in Gangwon-do. All factors related to the road structures by locations were significant except for banking slope length. Road width, longitudinal gradients, banking and cutting slope length by slope gradients were not significantly different and banking slope gradients in the range less than $30^{\circ}$, from $30^{\circ}$ to $35^{\circ}$ and more than $40^{\circ}$ and cutting slope gradients were significantly different for all areas. Road width, longitudinal gradients, banking slope length by soil types were not significantly different and others were significantly different. All factors related to the road structures by road position were significant except for cutting slope gradients.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.159-166
• /
• 2009

On freeways, factors inducing traffic accidents consist of two major elements such as driver factors and road environment factors. Research have been done and shown that there would be relationship between design elements such as radius, slopes, superelevations, and observed speeds and accident rates. The present paper confirms that these elements are correlated with accident rates. Furthermore, the paper identifies standard deviation of these elements as the design consistency and compare them with reduction of accident rates. This type of work leads to identify the fact that standard deviations based design consistency are correlated with accident rates. The results of the paper may contribute to encourage the quantified use of design consistency during highway design.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.125-131
• /
• 2011

This research aims to investigate the cause of the occurrence of a weak road drainage section scientifically and specifically through a site survey for a poorly drained section occurring due to rainfalls during road operation. This paper deeply reviewed the existing research results and current situation data on the poorly drained sections accumulated in Korea Expressway Corporation in order to investigate the cause of the occurrence of a weak road drainage section, and deeply verified and analyzed the weak sections for the road surface drainage facilities and the other road drainage facilities by visiting the expressway controlled by the 6 local headquarters and 33 branches of Korea Expressway Corporation. As a result of site surveys for the weak road drainage sections, i) in a road surface section, occurrence of ponding in the road shoulder pavement due to slope changes, bad collection of water in the collecting well at a median strip, shortage of road shoulder dike height, and inferior construction, etc. was analyzed to be the main cause of the occurrence of poorly drained sections, and ii) in a road neighborhood section, the occurrence of pavement height difference in a main road and shoulder section due to inferior ditches on a slope and the bad drain age at the inlet and outlet of a culvert due to soil deposits, debris, etc. were analyzed to be the main cause of the occurrence of weak sections. Proposed as a plan to improve the poorly drainage section of road were i)calculation of capacity through material changes at the ditch, enhancement of vertical sections and hydraulic analysis in terms of construction and other aspects, ii)derivation of a combined slope considering a slope and a vertical linearity and maintenance of proper distance between drainage structures in a vertical concave section in terms of geometrical structure, and iii)calculation of the drainage facility installation interval using a minutely rainfall intensity formula and a non-uniform flow analysis technique in terms of hydraulics and hydrologics and prompt removal of rainfalls from the road surface according to a linear drainage method.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.63-72
• /
• 2007

The purpose of this study is to develop a traffic characteristic analysis, a correlation analysis with the variables of traffic characteristics, and accident estimation models while recognizing the seriousness of the traffic accidents. The analyses deal with the 181 4-legged signalized intersections that accounted for 1,183 out of 3,115 accidents in Cheongju in 2004. After measuring ADT, intersection area, average lane width, elevation, and other items as independent variables and the number of traffic accidents, the traffic accident rate (accidents per million entering vehicles) and equivalent property damage only (EPDO) figures as dependent variables which are estimated as influencing signalized intersection accidents, the estimation models are developed using correlation analysis and multiple regression analysis. In the analysis of the number of traffic accidents, the model indicates an $R^2$ of 0.612, and five independent variables are taken as significant factors. In the analysis of traffic accident rates, the model indicates an $R^2$ of 0.304 and five significant factors, including intersection area and ADT. Also, for the analysis or the EPDO numbers, which coincides with understanding the seriousness of the traffic accidents and the traffic characteristic analysis, the model indicates an $R^2$ of 0.559, and four independent variables (ADT, main street average lane width, elevation, and speed limit) as significant factors.

• Journal of Korean Society of Transportation
• /
• v.32 no.5
• /
• pp.473-486
• /
• 2014

This study aims to review whether climbing lane installment is needed by analyzing the impact that standard trucks have on traffic according to vertical alignment at SMART highway, and if climbing lanes are required to propose truck speed change curves based on slope length. We used VISSIM simulation model to obtain the speed change of the standard truck on uphill roads. The standard truck on climbing lanes was set for 100kg/kW (170lb/hp) with the entry speeds set and analyzed by 90, 100, and 110 km/h considering the future speed limit of trucks. The results of the research show that under SMART highway circumstance, the 1 and 2% vertical alignment is not needed at the climbing lane but 3% vertical alignment is necessary. In order to install the climbing lane at 3% vertical alignment, the speed change curve of truck depending on slope length of 90, 100, and 110km/h of entry speed is proposed.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.71-78
• /
• 2010

The road safety depend on many road factors like vertical alignment, horizontal alignment and road cross section angle. These data are hardly to get with drawings, and the real data are differ from drawings because of road pavement overlay, etc. To get these data, so many time and cost are needed, moreover it is dangerous work in heavy traffic road. In this study we obtained the road safety data with RoSSAV(Road Safety Survey & Analysis Vehicle) of Korea Institute of Construction Technology in accordance with traffic flow, and make analysis of road safety with the vertical alignment, horizontal alignment and road cross section angle data. We derived the safety improvement method in Young-dong accident prone spot and described detail method in this paper.

• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.925-936
• /
• 2003

The objective of this study is to suggest new drawing methods of isochrones using GIS. For this purpose the Unit Hydrograph (UH) of studied watershed for instantaneous rainfall suggested by Clark have been determined by routing the time-area curve through a single linear reservoir. To evaluate constructing methods of isochrones three methods has been examined; Channel Profile and Clark-kict method; Laurenson method; Average velocity method of S.C.S. Also, these methods have been recomposed by GIS in this study. To apply first method, spatial modeling, the vector based on the stream network and Route_System measuring a distance between points has been used. A raster based on the flow direction grid from burn DEM and the slope grid from original DEM has been applied for the second method. The third method has been applied by a raster based on the landuse grid and a velocity function expressed by slope. Results by these three methods have been evaluated with observed hydrograph, and the method using average velocity method of S.C.S shows more reasonable results comparatively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.509-516
• /
• 2020

Since the 1960s, many rivers have been polluted and destroyed due to river repair projects for economic development and the covering of small rivers due to urbanization. Many studies have analyzed rivers using measured river topographic factors, but surveying is not easy when the flow rate changes rapidly, such as during a flood. In addition, the previous research has been mainly about the cross section of a river, so information on the longitudinal profile is insufficient. This research used informational entropy theory to obtain an equation that can calculate the average river slope, river slope, and river longitudinal elevation for a river basin in real time. The applicability was analyzed through comparison with measured data of a river's characteristic factors obtained from a river plan. The parameters were calculated using informational entropy theory, nonlinear regression analysis, and actual data. The longitudinal elevation entropy equation for each stream was then calculated, and so was the average river slope. All of the values were over 0.96, so it seems that reliable results can be obtained when calculating river characteristic factors.

• Journal of Korean Society of Forest Science
• /
• v.89 no.1
• /
• pp.33-40
• /
• 2000

This study was carried out to evaluate the fill slope failure possibility of forest road in Metamorphic rock area using fuzzy theory which is non-linear model. The results were summarized as follows. The potential slope failure by nine factors was mainly occurred under the such conditions as the total road width ranging from 4m to 5m, longitudinal gradients below $2^{\circ}$, fill slope length greater than 8m, fill slope gradients steeper than $40^{\circ}$, road on ridge position, soil types with weathered rock, slope gradients steeper than $40^{\circ}$, aspect of NW, and longitudinal slope form in convexity. The weight of importance by factors on fill slope failure was ranked in the order of fill slope length, fill slope gradient, road position, soil type, aspect and longitudinal slope form. The analysis showed that the fill slope failure possibility was low with less than 0.485 of the fuzzy integral value and high with more than 0.620 of the value. And the discriminant accuracy was 74.6%. The analysis with six out of nine factors indicated that the possibility was low with less than 0.441 of the fuzzy integral value and high with more than 0.583 of the value. In this case, the discriminant accuracy was slightly increased to 78.0%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.436-436
• /
• 2018

하천의 조도계수는 하상 입자들의 크기 및 형상, 식생, 수로의 만곡 등 흐름특성에 영향을 주는 복합적인 경험적 매개변수이므로 그 값을 정확히 산정하는 것은 매우 어렵다(Chow, 1959). 제주도 산지하천은 하상이 매우 불규칙하고 조도계수의 불확실성으로 인해 정확한 홍수위, 홍수량 산정이 어렵다. 또한 하상경사가 매우 급하여 상류와 사류가 복합적으로 발생하므로 수치모의 시 수위차가 크게 발생할 우려가 있다. 따라서 현장실측 기반의 하천 조도계수 산정을 통한 홍수위, 홍수량 산정에 정확도를 향상시킬 필요가 있다. 이 연구에서는 제주도 북부지역의 건천(한천, 병문천, 독사천, 산지천)을 대상으로 하상재료를 직접 실측하여 하상 입경을 이용한 조도계수를 산정하였다. 실측 방법은 대상하천의 현장답사 및 현장조사를 사전에 실시하였으며, 하천의 종단 방향으로 1km 간격, 100개 이상의 하상재료를 표본으로 취하고 선격자법을 적용하였다. 대상하천 하류부의 좌안, 우안은 대부분 하천 정비에 의한 제방 구축이 되었으며, 상류부는 경사가 급한 암질로 구성되어 있으므로 하상을 중심으로 구성물질의 입경과 조고를 측정하여 상류 흐름의 영향범위를 고려한 조도계수를 산정하였다. 표본 측정시 점 사주, 여울, 웅덩이 등 국부적으로 하상재료의 변화가 심한 구역은 피하고 가급적 해당 구역에서 보편적으로 산재된 하상재료를 선택하였다. 향후 부정류 모형인 HEC-RAS를 이용하여 실측 유량과 수위를 적용한 조도계수를 산정한다면 보다 정밀한 조도계수를 산정할 것으로 판단된다.