• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1259-1266
• /
• 2022

Recently, due to the specialization of structural design standards and evaluation methods, the classification rules are being integrated. A good example is the common international rules (CSR). However, detailed regulations are presented only for the cargo hold area where the longitudinal load is greatly applied, and no specific evaluation guidelines exist for the bow and stern structures. Structural design of the mentioned area is carried out depending on the design experience of the shipbuilder, and because no clear standard exists even in the classification, determining the root cause is difficult even if a structural damage problem occurs. In this study, an engineering-based solution was presented to identify the root cause of representative cases of buckling damage that occurs mainly in the stern. Buckling may occur at the panel wall owing to hull girder bending moment acting on the stern structure, and the plate thickness must be increased or vertical stiffeners must be added to increase the buckling rigidity. For structural strength verification based on finite element analysis modeling, reasonable solutions for load conditions, boundary conditions, modeling methods, and evaluation criteria were presented. This result is expected to be helpful in examining the structural strength of the stern part of similar carriers in the future.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1371-1375
• /
• 2005

The paper has analyzed the influence of tire design variable on the tire Force and Moment (F&M) characteristics, especially by the belt angle, the Plysteer Residual Aligning Torque (PRAT) which is considered as one of the causing factors for the vehicle pull. To validate the tire FE model, the tire stiffness and the PRAT which can be derived from the simulation data have been compared with the experimental data of test machine. In addition to PRAT characteristic, the tire stiffness and cornering characteristics due to the belt angle have been investigated. The effects of drum's curvature on the PRAT have been also investigated using the tire FE model and the usefulness of the current drum type F&M test machine can be confirmed.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.3022-3024
• /
• 2005

연성 PCB(flexible printed circuit board)는 현재 노트북 PC와 디지털 카메라등에 적용되며, 굴곡성이 강하고 소형화 및 조립에 용이하여 주로 기판 사이나주기판과 외부 커넥터사이에 데이터의 전송매체로써 널리 사용되는 핵심부품이다. 근래에 개발되는 PCB 기반의 고성능 신호처리회로들은 데이터 전송율이 수백 MHz에서 수 GHz에 이르고 있으며, 신호선과 유전체, 접지판의 구조적 특성에 따라서, 반사 효과와 같은 신호무결성 문제들이 파생되어 신호의 최대성능을 제한하게된다. 이에 따라 적절한 임피던스 제어를 통하여 고성능신호들의 왜곡을 상쇄시키는 기술이 중요하게 되었다. 본 논문에서는 연성 PCB 전송라인을 위한 임피던스 모델을 대상으로 각 모델의 주요 특징 및 정확성을 분석하였다. 연성 PCB의 전송라인은 보통 전통적인 마이크로스트립 라인의 특성 임피던스 모델에 비해 신호선의 너비가 크며, 이를 반영한 개선된 수학적 임피던스 모델들이 제안되어 있다. 따라서 본 논문은 기존의 마이크로스트립 전송라인과 연성 PCB 전송라인에 적합한 수학적 모델들을 이용하여 신호 무결성 문제를 모의할 수 있는 CAE(computer-aided engineering) 도구의 임피던스 측정 결과를 비교 및 분석하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.112-126
• /
• 1993

In this paper, unified requirements of IACS on longitudinal strength of ships are investigated using nonlinear wave loads analyses under short term irregular waves. Also, analyses on IACS wave data were carried out for the purpose of presenting the guideline for future use. While keeping theoretical consistensy, the rule requirements for horizontal shear force, bending moment and torsional moment are newly proposed for the ships of large deck openings bases on the calculation results for 17 sample ships. The requirements for side shell hydrodynamic pressure are also presented. All the calculated results are compared with other Societies and present KR rules. These formula will be checked when corresponding requirements of structural scantling are determined.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.2 s.179
• /
• pp.104-112
• /
• 2006

The influence of tire belt angle on the Plysteer Residual Aligning Torque(PRAT) and the cornering stiffness by the FEM has been studied. The PRAT is a performance factor of the tire about vehicle pull, and the cornering stiffness has relation to vehicle steering response of outdoor test. To validate FE model for analysis, simulation data for both the static stiffness(vertical, lateral) and the PRAT have been compared with the experimental data. In addition to the characteristics of the PRAT and the cornering stiffness due to the tire belt angle, rolling and cornering contact characteristics have been studied. The tendency of the PRAT and the cornering stiffness due to the belt angle can be used as a guide line for the tire design in relation to vehicle pull and vehicle steering response.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.345-347
• /
• 2003

본 논문에서는 디지털 보호 계전기에 쓰이는 필터 중에서 최소 자승 알고리즘을 이용한 고성능 FIR 필터를 설계하였다. 기존의 DFT필터와 MATLAB 시뮬레이션을 이용하여 비교하였으며 FIR 필터의 VHDL모델 및 합성에 중점을 두었다. FIR 필터는 기본적으로 유한개의 임펄스 응답이 이루어지기 때문에 기타 다른 필터에 비하여 안정도가 높으며 선형적인 위상을 가지기 때문에 차단 주파수 대역의 왜곡현상을 없앨 수 있는 장점을 가지고 있다. 여러 가지 알고리즘으로 구현한 FIR 필터를 시뮬레이션 한 결과 최소 자승 알고리즘이 가장 우수한 결과를 나타내었다. 기본적으로 디지털 보호 계전기에서 디지털 필터의 기능은 사고 전압, 전류로부터 60Hz의 기본파 추출 CT, PT 왜곡 및 DC offset을 제거하는데 있다. 본 논문에서는 이러한 기능을 가지면서 샘플링 주파수와 차수를 같게 하여 FIR 필터와 DFT 필터의 주파수 응답과 연 산 속도를 비교 하였다. 본 논문에서 설계된 최소 자승 알고리즘을 이용한 FIR 필터는 같은 조건의 DFT필터에 비해 1고조파와 2고조파의 차이가 10db 이상 더 우수 하였으며 연산 속도 또한 2배 이상 좋은 결과를 보였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.6
• /
• pp.81-86
• /
• 2006

Routing signal lines in PCB, line shapes would be straight or bent. time-domain and frequency-domain evaluation of the signal property and interference are archived by precise Modeling of differential signal line. Some of CAD tools can extract equivalent circuit model parameters. but it takes a long time and heavy loads. This paper introduces a basic RLC equivalent circuit model parameter extraction technique for bent differential structures using genetic algorithm by this technique, we can model equivalent circuit of bent differential structures more faster.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.3
• /
• pp.100-115
• /
• 1993

In this paper, the extent of use of three kinds of the existing idealized structural units, namely the idealized beam-column unit, the idealized unstiffened plate unit and the idealized stiffened plate unit, is expanded to deal with the excessive tension-deformation effects, in which a simplified mechanical model for the stress-strain relation of steel members under tensile load is suggested. The 1/3-scale hull model for a leander class frigate under sagging moment tested by Dow is analyzed, and it is shown that the excessive tension-de-formation is a significant factor affecting the progressive collapse behavior, particularly in the post-collapse range.

• Journal of Digital Convergence
• /
• v.13 no.8
• /
• pp.1-8
• /
• 2015

This paper focuses on analyzing Korean language learning effect through the STEAM class using a robot which is targeted on multicultural elementary school students. For the purpose of it, the degree of difficulty and interest of how students feel has been measured. By using the programing tool of Korean language entering base, they learn the programming commands like as variable, data type, branching statement, loop statement, etc in Korean, the effect of Korean learning has been measured. It has been examined two interviews at the beginning and the end of the second semester to measure the effect of Korean language learning. As a result of this research, It can be realized that multicultural children who have similar linguistic characteristics and cultural sphere understood Korean language easily when they take the Korean language class by utilizing a robot, and the class had an effect on the acquisition of Korean language for multicultural children.

• Microbiology and Biotechnology Letters
• /
• v.18 no.4
• /
• pp.437-441
• /
• 1990

For the genetic development of more powerful antagonistic Pseudomom - YPL-1 as a biocontxol agent against soilborne plant pathogenic Fuaarium solani causing root rot of many important crops, mutants improving the productivity of chitinase were obtained by mutation with UV radiation or NTG treatment, P. stutzeri YPL-M26 (UV mutant) and P. stutzeri YPL-MI78 (NTG mutant) could improve the productivity of chitinase by 2.5 and 2.0 times, and its antifungal activity by 1.7 and 1.5 times, respectively. The antifungal mechanism of P. stutzeri YPL-M26 was caused by lysis of the fungal cell wall by hydrolytic enzymes such as chitinase. The antifungal activity of crude chitinase of P. stutzeri YPLM26 on the mycelial growth of F. solani was observed to be much higher than that of the original strain. The enzymes produced by P. stutzeri YPL-M26 were the same as the original strain in enzymatic properties such as optimal pH and temperature.