• Clean Technology
• /
• v.6 no.1
• /
• pp.39-49
• /
• 2000

Ultra Rapid Coagulation (URC) can dramatically remove pollutants loaded in wastewater by adding weighted coagulation additives (WCA) and recycling sludge into the coagulation basin to increase settling velocity and surface adsorption ability of floc. Also settling chamber together with lamella plates offers the high rate settling velocity, which can economically treat a considerable amount of pollutants like as combined sewage overflow (CSO) during the heavy rainfall and reduce the pollutants load into the receiving water for securing water source. It was estimated optimal configuration of settling chamber by using fluent model and the possibilities of reusing the sludge generated in this system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.221-232
• /
• 1993

In this study, the period for stabilization in the case of recycling leachate was compared and analyzed with the case of non-cycle type, using lysimeters filled with municipal organic refuse. The lysimeters were operated with various detention time. In addition, the degree of stabilization was estimated by the way of measuring the quantity of gas from landfills. As the results, the recycle of leachate, which was modified as the neutral level of pH, accelerated the biological decomposition of organics with the raped growth of anaerobic bacteria in the system, and reduced the period for the stabilization. In the case of BOD and COD in leachate, COD. which had been originality similar to BOD, had increased more rapidly than BOD as time lapsed. Moreover, the quantity of gas from the recycle reactor was larger than from the non-cycle reactor. The shorter the detention time of leachate gas, the larger the quantity of gas produced in the lysimeters.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.4 s.47
• /
• pp.397-406
• /
• 2000

This study presents an effective optimal technique to control quantitatively lateral drift for tall steel braced frames subject to horizontal loads. In this paper, the displacement sensitivity depending on behavior characteristics of steel braced frames is established, and also the approximation concept that has the generality of the mathematical programming and can efficiently solve large scale problems is introduced. Especially, the commercially available standard steel sections are used for the discrete selection of member sizes. Three types of 12-story braced frames and a 30-story braced framework are presented to illustrate the features of the quantitative lateral drift control technique proposed in this study.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1016-1019
• /
• 2009

Detailed survey of the rock mass is essential for design, construction and maintenance of rock slope. However, geological survey of poor outcrops and various geophysical aids provides limited information for slope engineering. Remote measurement system for excavation surface (Surface Mapper) and projection s/w for borehole data (Fracjection) are developed for further support of slope surveying. The Surface Mapper measures orientation of joint, fault, foliation on excavated rock surface and database the measured data. The Fracjection projects measurements in boreholes, which are obtained by BIPS, Televideo and DOM operation, to any expected excavation space. These methods promise new approaches for surveying, designing, constructing and maintaining processes of slope.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.109-115
• /
• 2011

The ice tank is important facility to check the performance of the ship and offshore in ice condition before the construction. MOERI(Maritime & Ocean Engineering Research Institute) constructed ice model basin on the end of 2010. The ice technology to know the phenomena of ice near the ship and to estimate power of the ship in model scale is the main characteristic of the ice model basin. To achieve this goal in one ice sheet, making of test plan and feasibility check of test possibility have to review in the beginning stage of the every test. This paper describes the number of maximum resistance and self propulsion test in a sheet of level ice and proposes the methodology to optimize pack ice, rubble ice, brash ice and ice ridge test in MOERI ice tank. The feasibility of free running test to know maneuvering performance in ice field and some specific idea to measuring ice thickness and ice ridge shape was proposed.

• Journal of the Korean Society for information Management
• /
• v.41 no.2
• /
• pp.131-154
• /
• 2024

This study aims to check the effectiveness of 'diligent search' stipulated in Article 35-4 of the Copyright Act of Korea. 'Diligent search' is to identify the copyright holder and his or her contact information. But the process provided by the law includes many cases in which it is practically impossible to identify the relevant details, and includes unnecessary requirements. So it appears that improvement is needed. Based on this, it was proposed to improve the text of the Copyright Act (Article 35-4) and to abolish unnecessary provisions (Article 16-3 no.5~8) of the Enforcement Decree.

• 월간 기계설비
• /
• no.8 s.217
• /
• pp.41-51
• /
• 2008

지난 7월 1일부터 개정된 근로기준법령에 따라 상시근로자 20인 이상 사업장은 주40시간제가 적용 되고 있다. 주40시간제 적용은 지난 2004년 7월 1일 이후 사업장 규모에 따라 순차적으로 적용해 왔으며, 지난 7월 1일부터는 20명 이상 사업장까지 확대 적용한 것이다. 그러나 건설현장은 규모가 다른 하도급업체가 혼재하고 있어 주40시간제의 효과적인 적용 및 정착이 어려운 실정이다. 이러한 문제를 해결하기 위해 건설공사 규모에 따라 주당 근로시간을 통일적으로 적용하는 방안이 필요함에 따라 노동부는 건설공사 규모에 따라 주당 근로시간을 통일해 적용하는 '건설공사 등에 대한 근로시간 적용 특례(법 부칙 제5조의2, 영 부칙 제2조)'를 마련하고 관련 내용 및 문답풀이를 담은 업무처리지침을 발표했다. 근로기준법령은 지난 7월 1일부터 시행에 들어갔다.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.49
• /
• pp.111-137
• /
• 2011

UCP 600 Article 14(b), providing rules for the period of the examination of documents, is a radical reorganization of UCP Article 13(b). The provision changes the period of time to a maximum of five banking days instead of reasonable time. One of the critical problems giving rise to the difficulty in interpretation and application is the question of fact that there may be two possible conflicting options in determining the time of checking documents presented. The one doctrine is fixed time(safe harbor) standard, and the other is hidden reasonableness standard. This study analyzes which option should be adopted for the optimal application standard by welfare effect methodology using consumer surplus approach and suggests that safe harbor standard should be optimal solution to the determination of period of examination of documents presented in letter of credit regime.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.3 s.32
• /
• pp.391-400
• /
• 1997

The objective of this paper is to suggest formula of Concrete Filled Tube Beam-Column members maximum strength by using of numerical analysis and tests. The numerical analysis results are compared with test results for evaluating numerical analysis method. The formula of Limit State Design of Architectural Institute of KOREA is used for basic form of suggestion formula. In order to suggest formula, two methods are used. One is to use the coefficient, and the other is to use the amplified factor of material strength. The formula by two methods are compared with numerical analysis results.

• Journal of Korean Society of Water and Wastewater
• /
• v.8 no.3
• /
• pp.1-8
• /
• 1994

In the general process of design for aerobic digestion, the design for field plant of which inflow pattern is continuous inflow is performed using the results from lab scale batch reactor. However, the recent researchers reported that the general designs were performed as over-estimated, Therefore, in this study, laboratory batch experiments were carried out at $20^{\circ}C$ and pH 7.5 on the aerobic digestion of waste activated sludge at different solid levels. This treatise could consider the negligence about effective digestion periods the usage of VSS as solid concentration, and the effect of initial solid concentration of solid degration rate coefficient($k_d$) as reasons of the overestimated design, and showed the scheme of how to design for aerobic digestion from batch experiment.