• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.299-302
• /
• 2009

이 논문에서는 라인 트레이스 차량의 주행 제어를 위한 퍼지 제어기를 설계하였다. 라인을 감지하는 센서들의 감지 상태에 따라 센서값을 산출하고 이 센서값은 조향각 제어 퍼지 규칙의 입력으로 사용되어 조향각을 제어값으로 산출한다. 또한 산출된 조향각은 다시 모터속력 제어 퍼지 규칙의 입력으로 사용되어 주행 속도 결정을 위한 모터속력을 제어값으로 산출하게 된다. 제안한 퍼지 제어 기법을 이용하여 조향각만을 제어한 경우와 조향각과 모터속력을 함께 제어한 경우를 각각 실험한 결과, 모터속력을 함께 제어한 경우가 트랙을 이탈하지 않으면서 더욱 빠르게 주행함으로써 제안한 기법에 효과적임을 보였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2289-2294
• /
• 2009

In this paper, we proposed a fuzzy controller for racing of a line trace vehicle. Sensor values are computed by statuses of line detecting sensors attached to the line trace vehicle and these sensor values are used for fuzzy inference rules of steering angle control to decide steering angle as output. The decided steering angle is also used for fuzzy inference rules of motor speed control to decide motor speed as output. We experimented and analyzed two proposed methods - one is fuzzy control of steering angle only and the other is fuzzy control of both steering angle and motor speed. In the experiment, we verified that the second proposed method was more efficient in racing speed.

• Journal of the KSME
• /
• v.33 no.10
• /
• pp.856-860
• /
• 1993

차량의 조종안정성을 해석하기 위해서는 차륜과 현가장치에 의한 비선형성과 조향장치의 동특성 등을 고려한 3차원 차량 모델을 이용하여 정상상태와 과도상태에서의 조향입력에 대한 차량 주 행역학을 해석하여야 한다. 승차감, 조향성능, 주행안정성 등의 동적성능과 현가장치의 특성관 계를 규명하기위하여 3차원 차량모델에 의한 해석과 설계변수에의 민감도 해석을 수행할 필요가 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.2
• /
• pp.180-187
• /
• 2010

In this paper, a GNSS-based AGV system was designed, and steering tested on a golf cart using electric wires in order to confirm the control efficiency of the low speed vehicle which used only position information of GNSS. After analyzed the existing AGVs system, we developed controller and steering algorithm using GNSS based position information. To analyze the performance of the developed controller and steering algorithm, straight-type and circle-type trajectory test are executed. The results show that steering performance of GNSS-based AGV system is ${\pm}\;0.2m$ for a reference trajectory.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.6
• /
• pp.731-738
• /
• 2013

This paper describes a fault-tolerant driving control strategy for an independent steer-by-wire system in sixwheel-drive/six-wheel-steering vehicles. An algorithm has been designed to realize vehicle maneuverability that is as close as possible to that of non-faulty vehicles by inducing high slip ratio of the wheel through a faulty steer-by-wire system in order to reduce the lateral tire force, which is resistant to the yaw motion. Considering the transition of the longitudinal tire force of a wheel with a faulty steer-by-wire component, the longitudinal tire forces are optimally distributed to the other wheels. Fault-tolerant driving performance has been investigated via computer simulations. Simulation studies show that the proposed algorithm can significantly improve the maneuverability of a vehicle with a faulty steer-by-wire system as compared to the optimal traction distribution method.

• Journal of the korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.55-63
• /
• 1996

자율주행 차량이란 목적지를 입력하면 운전자의 도움없이 자율적으로 주행환경을 인식하면서 주어진 목적지까지 안전하고 신속하게 스스로 주행할 수 있는 차량을 말한다. 차량이 자율주행을 하기 위한 가장 중요한 요소는 주행로의 경계를 인식하고 정확한 조향 각도를 구하는 일이다. 이의 잘못된 인식과 잘못된 계산은 차량으로 말미암아 많은 물적, 인적손실을 가져올 수 있다. 본 연구에서는 주위환경을 인식하는데 차량의 전방에 CCD 카메라를 부착하여, 이를 통해 얻어진 도로의 영상으로부터 도로 경계의 인식 방법과 핸들의 조향 각도를 계산하는 방법론을 제시하고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.347-348
• /
• 2011

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.39-43
• /
• 2016

In this paper, we propose PID gain auto tuning method in steering type mobile robot. PID controller gain select method are various methods. Ziegler-Nichols step tuning method is one method tuning in PID controller. Use step tuning method find a the first gain and did experiment in steering mobile robot. and Make a new the second gains from the first gains. After appling the second gain in PID controller, Where perform observe for convergence time and stabilization error. Experiments result the second gain are useful in real steering mobile robot system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.1
• /
• pp.27-32
• /
• 2002

This paper describes a fuzzy steering controller for an outdoor autonomous mobile robot using MR(magneto-resistive) sensor. Using the magnetic field difference values(dBy, dBz) obtained from the MR sensor, we designed fuzzy logic controller for driving the robot on the road center and proposed a method to eliminate the Earth magnetic field. To develop an autonomous mobile robot simulation program, we have done modeling MR sensor, mobile robot and coordinate transformation. A computer simulation of the robot including mobile robot dynamics and steering was used to verify the driving performance of the mobile robot controller using the fuzzy logic. So, we confirmed the robustness of the proposed fuzzy controller by computer simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.7
• /
• pp.769-776
• /
• 2003

This paper presents analysis and design of microstrip Rotman lens operating over wide band and wide steering angle by the contour integral method along with the segmentation method. All mutual coupling, internal reflections between ports and the discontinuity at every junction are taken into account. Equally spaced ports are designed and realized, which make suppress output ripple through the array ports. Impedance matching and mutual coupling between ports are analyzed and optimized using 12 input and 12 output exponential tapers. The measured results of fabricated lens show ${\pm}$ 1.8 dB insertion loss deviation over 6∼18 GHz wide frequency range and beam steering accuracy less than 1$^{\circ}$over ${\pm}$53$^{\circ}$angle and agrees well with the analysis results.