• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.363-364
• /
• 2012

• 드라이브 ㆍ 컨트롤
• /
• 제4권1호
• /
• pp.16-22
• /
• 2007

• 한국자동차공학회논문집
• /
• 제21권5호
• /
• pp.25-33
• /
• 2013

All-wheel steering (AWS) system is applied to articulated vehicles to reduce turning radius. The swing-out suppression algorithm is applied to AWS ECU, a key component of AWS system. The swing-out suppression algorithm applied to AWS ECU has a problem when velocity of vehicle is changed. In this paper, new algorithm based on moving distance that solve velocity problem is proposed. The HILS simulation and the test articulated bus is used to validate algorithm.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.31-37
• /
• 2018

In order to improve stability and controllability of SUV vehicle, Integrated Dynamics Control system with Steering system (IDCS) was developed. Eight degree of freedom vehicle model and front and rear steering system model were used to design IDCS system. It also employs Fuzzy logic control method to design integrate control system. The performance of IDCS was evaluated with two road conditions and several driving conditions. The result shows that SUV vehicle with IDCS tracked the reference yaw rate under all tested conditions. IDCS reduced the body slip angle also. It represents IDCS improves vehicle stability and steerability.

• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.87-96
• /
• 1996

The proportional pressure control valve(PCV) is an essential component in the open loop controlled rear wheel steering gear of the four wheel steering(4WS) system on the passenger car. The valve should have versatile functions and higher performance. But, it is hard to find the proportional pressure control valve suitable for the 4WS system. In this paper, the determination of the valve parameters was studied by the stability discrimination and the characteristic analysis for the purpose of the development of a new PCV for the 4WS. The mathematical model of the valve was derived from the valve-cylinder system and the programme for numerical computation was developed. The transfer function of the system was obtained from the mathematical model. The characteristics of the valve were inspected through the experiment and compared to those obtained by numerical method. And then the stability discrimination of the system was done by root locus and the analysis of characteristics was done by the developed programme. From the experiment and the analysis of characteristics was done by the developed programme. From the experiment and the inspection, the appropriation of mathematical model and the usefulness of the programme were confirmed. And the parameters which might affect the performance of the valve can be determined by considering the stability discrimination, the characteristics analysis and required functions.

• 전자공학회논문지
• /
• 제53권5호
• /
• pp.37-46
• /
• 2016

본 논문에서는 고가의 위상천이기를 대체하여 로트만 렌즈 안테나를 이용한 2.442GHz 대역의 빔 조향 시스템을 제안한다. 본 빔 조향 시스템의 구성요소는 로트만 렌즈, 송신 안테나, 빔을 스위칭하기 위한 스위치 박스로 구성되어 있다. 초기 설계조건을 설정하고 요구조건에 맞춰 설계 및 제작하였다. 그 결과, 고가의 위상천이기를 대체한 로트만 렌즈의 사용으로 무반사실에서 빔이 조향됨을 알 수 있었다. 성능 검증을 통해 실시간 빔 수신 표시 장치인 정류안테나의 LED를 켬으로써 시각적으로 빔의 조향을 확인하였다.

• 오토저널
• /
• 제2권2호
• /
• pp.21-24
• /
• 1980

차량의 제동장치는 제동시 차량의 조향안정성을 유지하면서 최소한의 제동거리를 확보하는 장 치라 할 수 있다. 제동시 차량의 조향안정성 유지와 최소제동거리를 확보하기 위해서는 차량의 적절한 제동능력에 필요한 전제동토오크를 전후륜의 제동장치에 적당하게 배분시켜야 한다. 그러나 차량의 각차륜의 하중 상태는 여러 가지 적재상태와 제동시중량이동 등에 따라 변하게 되므로 고정된 제동장치로서는 전후륜의 제동토오크를 가변시킬 수 없어 설계시 빈도가 높은 조건에 맞추어 제동장치의 구성부품을 확정할 수밖에 없다. 차량에 따라서는 축하중상태의 변 화가 큰 경우와 공용화를 위하여 여러 모델의 차량에 동일제동 장치를 적용하려고 할 경우에 문제점이 따르기 마련이다. 본고에서는 제동장치의 전후륜의 제동토오크 배분에 대하여 고찰하여 설계개념을 파악하고자 한다.

• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.48-55
• /
• 2010

We have development the steering angle sensor using not only detecting parts but also integrating technique with semiconductors for automobile applications. The performance design and analysis of the steering angle sensor for intelligent vehicles is complicated due to variety of parameters. In this study, the performance characteristics of the angle sensor were analyzed using test rig. By means of magnetic induction technique, these new the steering angle sensors showed excellent magnetic characteristics. The detection range of steering angle sensor obtained was ${\pm}800^{\circ}$, the maximum non-linearity is 0.744% Full Span and the temperature range was $-40^{\circ}C{\sim}+125^{\circ}C$. With this conclusive, the inductive angle sensor was quite satisfactory for many applications in intelligent vehicles.

• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.186-193
• /
• 2014

On-center handling feel indices are the important numerical factors that meaning performance of manuability and stability felt by drivers. They should be considered to suspension design. The major factor that affect to these indices is the shape of assist torque curve. This paper presents the variables that meaning the shape of the assist torque curve and analyze the effect of each variables. And using interaction formulas, it is proposed that the method to extract the variables that satisfy the goal indices. The result of simulation that applied assist torque curve extracted by the method demonstrate the capability of this method with error under 8%.

• 한국자동차공학회논문집
• /
• 제20권2호
• /
• pp.15-20
• /
• 2012

This study is to propose and develop an integrated dynamics control system to improve and enhance the lateral stability and handling performance. To achieve this target, we integrate an AFS and a 4WS systems with a fuzzy logic controller. The IDCS determines active additional steering angle of front wheel and controls the steering angle of rear wheel. The results show that the IDCS improves the lateral stability and controllability on dry asphalt and snow paved road when double lane change and step steering inputs are applied. Yaw rate of the IDCS vehicle tracks reference yaw rate very well and body slip angle is reduced about by 50%. Response time of the IDCS vehicle is also decreased.