• Journal of Korea Water Resources Association
• /
• v.33 no.4
• /
• pp.447-459
• /
• 2000

Since the development of water resources is getting more difficult than ever before because of human-sociological condition, it would be necessary to develop a practically applicable technique for the management of water resources based on demand-side concept that could reduce unusable release for more effective and appropriate allocation of limited water resources. The objective of the study is to develop an optimal reservoir system operation model for water supply and energy augmentation by the combination of water budget analysis method in downstream area by MIP technique. The applicable study of the developed model was carried out and water supply capability of Nakdong river basin was re-evaluated by the developed model. The model has been found successful to guarantee appropriate water supply to the basin by means of deficit-supply management method and also turned out to be more practical tool for an optimal reservoir system operation model than other existing models.

• Journal of the Korean Vacuum Society
• /
• v.11 no.2
• /
• pp.127-134
• /
• 2002

Recently, Plasma display panel(PDP) has been in the spotlight as one of the next generation flat-panel-display device. The luminance and luminous efficiency improvement is the hot issues for making a plasma display into a large flat panel device. In this paper, We suggest a new penning gas mixture, in order to find the optimum mixture gas in plasma display panel. The optimum gas composition has been found by the partial pressure of inert gases(such as Af and Kr added to matrix of He(70%)-Ne(27%)Xe(3%) and Ne(96%)-Xe(4%)). The influences of Ar or Kr addition to Ne(96%)-Xe(4%) and He(70%)-Ne(27%)-Xe(3%) mixture gases are experimentally investigated for AC Plasma Display Panel. When rare As(0.01%-0.03%) or Kr(0.01%-0.03%) is added Ne-Xe and He-Ne-Xe mixture gases, the luminance increases over 10%-20% and luminous efficiency increases over 10%-20% at 200 Torr. It is sure that luminance and efficiency are improved by Penning effect. Also, This influence of Penning effect is shown by increased wall charge(10%-25%). In addition to the result, firing voltage and minimum sustain voltage was approximately decreased by 2V-3V.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.274-274
• /
• 2011

백색 유기발광소자는 일반적으로 적색, 청색 및 녹색의 삼원색을 혼합하여 제작하거나 청색 유기발광소자의 빛을 일부 변환시켜 적색 혹은 녹색을 발생하여 백색을 발광하는 구조를 가진다. 백색을 구현하기 위한 삼원색 조합법은 소자의 구조가 복잡하고 제조단가가 상승하며 제작 된 백색 유기 발광 소자내의 발광 영역을 담당하는 물질의 빠른 열화 때문에 발광 스펙드럼에 변화가 생길 수 있다. 본 연구에서 제안하는 색변환 방법은 최적화된 청색 유기발광소자에서 발광된 빛을 색변환 무기물 형광체 층에 의해 재흡수하고 재발광하는 과정에 의해 빛이 발생되기 때문에 색변환 무기물 형광체 층을 사용한 유기발광소자는 구조가 단순하며 무기물 형광체가 외부노출에 안정하기 때문에 상대적으로 안정된 동작이 가능하다. 청색 유기 발광 소자의 효율이나 휘도를 개선하면 소자의 성능이 향상될 수 있는 구조적 장점이 있다. 그러나 기존에 일반적으로 제조하던 방법인 고상반응법에 의한 형광체입자의 크기는 ${\mu}m$ 이상이며 형태도 불규칙한 단점이 있다. 본 연구에서는 졸겔방법으로 녹색 무기물 형광체 $Zn_2SiO_4:Mn$를 제작하였고 청색 형광 유기 발광 소자에 적용하였다. X-선 회절측정 결과는 형성된 녹색 무기물 형광체내의 Zn 이온이 도핑된 Mn 이온에 대체되었음을 보여주었다. 제작된 진청색 형광 OLED의 전계발광 스펙트럼은 461nm에서 발광 스펙트럼을 나태내고 녹색 무기물 형광체는 470 nm에서 여기되어 Mn 이온의 $^4T_1-^6A_1$ 전이에 의하여 526 nm에서 발광을 한다. 이 과정에서 색변환층의 두께가 0.3 mm 이상일 때 461 nm의 발광스펙트럼의 세기가 급격히 줄어들었다. 이 결과는 제작된 녹색 무기물 형광체를 진청색 유기발광소자와 결합하고 색변환층의 두께를 변화하여 제작된 유기발광소자의 발광색을 조절할 수 있음을 보여주었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.4
• /
• pp.373-379
• /
• 2016

The thermal control device for the periodic working component combined solid-liquid phase change material (PCM) with heat pipes is designed and numerically studied. Due to high latent heat and retaining constant temperature during melting process the component peak temperature, not withstanding small radiator size, is reduced. The warm-up heater power consumption to keep the minimum allowed temperature is also cut down since the accumulated thermal energy is released through the solidification. The thermal buffer mass (TBM) made of Al can give the similar effect but the mass and power consumption of warm-up heater should increase compared to PCM. The amount of PCM can be optimized depending on the component heat dissipation and on/off duty time.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.12
• /
• pp.856-864
• /
• 2019

The weapon-target assignment (WTA) problem is a matter of effectively allocating weapons to a number of threats. The WTA in a rapidly changing dynamic environment of engagement must take into account both of properties of the threat and the weapon and the effect of the previous decision. We propose a method of applying the Greedy Randomized Adaptive Search Procedure (GRASP) algorithm, a kind of meta-heuristic method, to derive optimal solution for a dynamic WTA problem. Firstly, we define a dynamic WTA problem and formulate a mathematical model for applying the algorithm. For the purpose of the assignment strategy, the objective function is defined and time-varying constraints are considered. The dynamic WTA problem is then solved by applying the GRASP algorithm. The optimal solution characteristics of the formalized dynamic WTA problem are analyzed through the simulation, and the algorithm performance is verified via the Monte-Carlo simulation.

• KSBB Journal
• /
• v.32 no.1
• /
• pp.16-21
• /
• 2017

The multiple sclerosis caused by multiple inflammatory disease or immune system disorder, is usually treated by interferon ${\beta}$ through adjusting the abnormal immune reactions. For high production of human interferon ${\beta}$ using recombinant E. coli, codon optimized and wild type genes were synthesized. When pET-15b or pET-21a vector was used as an expression vector with each gene, there was no target protein expression. When pQE30 vector was used as an expression vector, human interferon ${\beta}$ was expressed by recombinant E. coli XL1-blue and E. coli JM109. Using the codon optimized gene, the expression of human interferon ${\beta}$ was slightly increased as compared to that from wild type gene. However, most of expressed human interferon ${\beta}$ was insoluble form.

• Journal of Service Research and Studies
• /
• v.9 no.4
• /
• pp.19-40
• /
• 2019

Mobility as a Service is a service conception to achieve the intelligent transportation system. Its aims to improve the travel experience. In one platform, it connects various transportation modes to offer service and users only need to pay in one time for the whole travel. But the single MaaS platform easily faces the problems such as low user traffic, low retention rate and the access to markets of the this service is still unfound. From the perspective of bicycle-sharing, this research makes the MaaS concept into bicycle-sharing to build a better service model. The bicycle-sharing combine with the MaaS concept is innovative in business model, travel model and service architecture. In addition, this research also tests users' expectations for service model. The research shows that MaaS-based bicycle-sharing could offer flexible and convenient travel experience in the aspects of combined transportation, travel, transfer and payment, and it also makes it possible to make travel services according to need, and sustainable transport.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.1 s.33
• /
• pp.201-208
• /
• 2005

Recently, the container terminal requires the study of method to increase efficiency through change of its operation method. Loading plan is a very important part to increase the efficiency of container terminal. Loading Plan is largely divided into two cases, deciding loading location and loading scheduling and this Paper proposes a more efficient method of container loading scheduling. Container loading scheduling is a problem of combination optimization to consider several items of loading location and operation equipments. etc. An existing method of cluster composition that decides the order of container loading scheduling has a restriction to increase the efficiency of work owing to rehandling problem. Therefore, we Propose a more efficient method of container loading scheduling which composes containers with identical attribution, based on ship loading list and yard map, into stack units of cluster, applying to hierarchical clustering method, and defines the restriction of working order. In this process, we can see a possible working path among clusters by defining the restriction of working order and search efficiency will be increased because of restricted search for working path.

• Elastomers and Composites
• /
• v.48 no.2
• /
• pp.133-140
• /
• 2013

Carbon fiber reinforced polymer (CFRP) composites consist of carbon fibers in a polymer matrix. Recently, CFRP composites having high thermal stability and low outgassing are finding their use in high performance materials for aerospace and electronics applications under high temperature and high vacuum conditions. Cyanate ester resin is one of the most suitable matrix resins for this purpose. In this study, proper combination of cyanate ester and catalyst, curing behavior, and cure cycle were determined by chemorheology. Optimum condition was found to be catalyst content of 100 ppm and curing temperature of $150^{\circ}C$. Thermal stability and outgassing of cured resin composition were analyzed and the results showed thermal decomposition temperature of $385^{\circ}C$ and total mass loss of 0.29%. The CFRP prepregs and subsequent composites were fabricated by predetermined resin composition and the cure condition. Tensile moduli of the composites were compared with theoretical models and the results were very consistent.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.4 s.74
• /
• pp.357-367
• /
• 2006

Drift design methods using resizing algorithms have been presented as a practical drift design method since the resizing algorithms proposed easily find drift contribution of each member, called member displacement participation factor, to lateral drift to be designed without calculation of sensitivity coefficient or re-analysis. Weight of material to be redistributed for minimization of the lateral drift is determined according to the member displacement participation factors. However, resizing algorithms based on energy theorem must consider loading conditions because they have different displacement contribution according to different loading conditions. Furthermore, to improve practicality of resizing algorithms, structural member grouping is required in application of resizing algorithms to drift control of high-rise buildings. In this study, three resizing algorithms on considering load condition and structural member grouping are developed and applied to drift design of a 20-story steel-frame shear-wall structure and a 50-story frame shear-wall system with outriggers.