• Parasites, Hosts and Diseases
• /
• v.21 no.2
• /
• pp.241-245
• /
• 1983

PraziquantEI ($Distocide^{\circledR}$), the KcrEan product, was tEstEd for its safety and Efficacy in treatmEnt of Clonorchis sinensiJ infccticn during the period from April to SeptembEr, 1983 in Korea. A total of 55 egg positive cases were selected and treated with the regimen of 25 mg/kg t.i.d. for 1 day (total 75 mg/kg). The follow-up stool examination was done in 47 cases by cellophane thir;k smear and Stoll's egg counting techniques. The 8 uncured cases were treated again with the same regimen. The laboratory tests for blood picture and liver function were done in 27 cases and compared before and after the treatment. The results obtainEd are as follows: 1. After single course treatment, the cure and egg reduction rates were 83.0 and 99.1% respectively. With the second treatment, excellent results of 100% in both rates were obtained. 2. Several kinds of side effects such as dizziness, headache, etc. were complained by 29 cases (61.7 %), however, those were so mild and transient that no special treatment was necessary. 3. No significant change in laboratory findings was recognizable before and after the treatment. From the above results, it is concluded that $Distocide^{\circledR}$ is as effective and safe as $Biltricide^{\circledR}$ and highly recommendable in treatment of C. sinensis infection.

• Pediatric Infection and Vaccine
• /
• v.23 no.2
• /
• pp.128-136
• /
• 2016

Purpose: This study was done to define clinical characteristics of fever without localizing signs (FWLS) in infants younger than 100 days of age with a goal of providing baseline data to establish a new diagnostic paradigm in the future. Methods: We reviewed medical records of 183 patients who admitted to Daegu Catholic University Medical Center for FWLS younger than 100 days of age from January 2013 to September 2015 retrospectively. Demographic, clinical features and laboratory findings were analyzed. Patients were divided into serious bacterial infection (SBI) and non-SBI groups, and then were compared between two groups to find risk factors for SBI. Results: Among 183 patients, lumbar puncture was performed in 98.9% and CSF pleocytosis was present in 35.9%. Sterile CSF pleocytosis was found in 43% of urinary tract infection (UTI) patients. None had concomitant bacterial meningitis in patients with UTI. As final diagnosis, febrile syndrome without source (25.7%) was most common. Among SBI, UTI was most common (99%). Birth weight, ESR, and CRP were significantly higher in SBI group compared to non-SBI group. Male sex (OR 4.93, 95% CI 1.60-15.24) and pyuria (OR 18.88, 95% CI 6.76-52.76) were identified as risk factors for SBI. Presence of sibling (OR 0.30, 95% CI 0.11-0.83) was significantly lower in SBI group. Conclusions: Our results showed UTI was the most common SBI in young infants with FWLS. Though aseptic meningitis can be coexisting with UTI, lumbar puncture may not be necessary in all patients having UTI.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_1
• /
• pp.559-570
• /
• 2017

A partial least squares regression (PLSR) model was developed to map the internal soluble solids content (SSC) of apples using a ground-based hyperspectral scanner that could simultaneously acquire outdoor data and capture images of large quantities of apples. We evaluated the applicability of various preprocessing techniques to construct an optimal prediction model and calculated the optimal band through a variable importance in projection (VIP)score. From the 515 bands of hyperspectral images extracted at wavelengths of 360-1019 nm, 70 reflectance spectra of apples were extracted, and the SSC ($^{\circ}Brix$) was measured using a digital photometer. The optimal prediction model wasselected considering the root-mean-square error of cross-validation (RMSECV), root-mean-square error of prediction (RMSEP) and coefficient of determination of prediction $r_p^2$. As a result, multiplicative scatter correction (MSC)-based preprocessing methods were better than others. For example, when a combination of MSC and standard normal variate (SNV) was used, RMSECV and RMSEP were the lowest at 0.8551 and 0.8561 and $r_c^2$ and $r_p^2$ were the highest at 0.8533 and 0.6546; wavelength ranges of 360-380, 546-690, 760, 915, 931-939, 942, 953, 971, 978, 981, 988, and 992-1019 nm were most influential for SSC determination. The PLSR model with the spectral value of the corresponding region confirmed that the RMSEP decreased to 0.6841 and $r_p^2$ increased to 0.7795 as compared to the values of the entire wavelength band. In this study, we confirmed the feasibility of using a hyperspectral scanner image obtained from outdoors for the SSC measurement of apples. These results indicate that the application of field data and sensors could possibly expand in the future.

• Journal of environmental and Sanitary engineering
• /
• v.20 no.1 s.55
• /
• pp.64-75
• /
• 2005

The total production of food waste was about 11,398ton/day('03) in Korea. Also, food waste was treated by landfill, incineration, reuse and anaerobic digestion. The method of food waste treatment depended primarily on landfill. However, the method of landfill causing social problems was prevented to treat food waste in the first of January 2005.12) Thus, anaerobic digestion is an important method to treat food waste because of possibility of energy recovery as methane gas. In this study, the possibility of food waste treatment containing high organic material and low pH in the one stage anaerobic reactor to save cost and time and energy recovery using $CH_{4}$ gas by the hybrid anaerobic reactor (HAR) was measured. The HAR was designed by combing the merits of the anaerobic filter (AF) to minimize the microorganism shock when food waste of very low pH was injected and up-flow anaerobic sludge blanket (UASB) to prevent from plugging and channeling phenomena by large suspended solids when semi solids were injected. Granule was packed in the section of HAR. The purpose of the BMP experiment was to measure the amount of methane generated when organic material was resolved under anaerobic conditions, to grasp bio resolution of organic material. Total accumulated methane production per VS amount was $0.471(m^{3}/\cal{kg}\;VS)$. So, the value was about $81.2\%$ of theoretical methane production which was $0.58(m^{3}/\cal{kg}\;VS)$ by elementary analysis and organic matter removal velocity (K) was $0.18(d^{-1})$. From these results, food waste was treated by anaerobic treatment. From this study, $CH_{4}$ generation from food waste (11,398 ton/day) could be estimated. By using an energy conversion factor of Braun's study, $5.97KWh/m^{3}\;CH4,\;60\%\;of\;CH_{4}$ gas generation, the amount of total energy producing food waste is to 6,727MWh/day. It could be confirmed that energy recovery using $CH_{4}$ gas was possible. Above these results, food waste containing organic matters of high concentration could be treated in HRT 30 days under an anaerobic condition, using the hybrid anaerobic reactor and reuse of $CH_{4}$ gas was possible.

• Korean Security Journal
• /
• no.36
• /
• pp.349-386
• /
• 2013

This research analyzes and evaluates The Korean Security Industry Law(TKSIL) putting the regulation of the present government about the private security industry. It nowadays becomes the important axis of the police services offered in the aspect of 'the national life safety' in connection with 'the materialization of society which is safe from the crime'. TKSIL is one of the national administration strategies which Park Gun-hye government aims on supervision policy. After seeking out the core values of the private security industrial policy which sets up in order to approach the national life safety which Park Gun-hye government aims, we make some assessments of this revised security industry law systematically. Particularly all keynote of policy about the private security of the police tried to be confirmed and the desirable direction of policy tries to be presented as to the security industry law application and real operation. In the site of organized civil complaint, the revised security industry law was revised as the direction which intensifies the administrative regulation as to the partial regulation such as it established the reason of the introduction of the arrangement license system. And grounds for disqualification of security instructor and guard, and rules of punishment is intensified order to intercept previously illegal and violent act of the security company etc. However it has the feature that it accomplishes 'the law principle(principle of statute)' the substantial portion through the effort of them changing a lot the content for the form of the law when being the clauses of the fundamental human rights limit, although it has been prescribed in "the security industry law enforcement ordinance" or "the security industry law enforced regulation". The security industry law revised this time brought from the change of the sharp policy through the revision of 17 clauses or new establishment. It can divide into 4 categorizes. (1) strictness of punishment in the site of organized civil complaint (2) Intensification of throwing out for the violation person in the private security business market time-limitedly (3) Intensification of the legal guide supervision power of police (4) upstream of the capital, name tag attachment under compulsion and the limit about other equipment use etc. Essentially "the security industry law" cannot help regulating the national interference of the private security and regulation with this content. However as to this interference and regulation, the limit has to be possible within reasonable range. As the history proved, excessive regulation by the country is not only due to bring the distortion of the security system of nation but also provoke national social cost. It can't be disregards ever that it premises the harmony which appropriate as well as reasonable in the socio-economic dimension for drawing the best combination that all things which get the compulsory education, it limits the person providing the private security service to the corporation, or it limits to the certificate of qualification holder are the ultimate for 'the safety of the national life'.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.1
• /
• pp.1-12
• /
• 2010

According to the capacity design concept which forms the basis of the current steel seismic codes, the braces in concentrically braced frames (CBFs) should dissipate seismic energy through cyclic tension yielding and cyclic compression buckling while the beams and the columns should remain elastic. Brace buckling in inverted V-braced frames induces unbalanced vertical forces which, in turn, impose the additional beam moments and column axial forces. However, due to difficulty in predicting the location of buckling stories, the most conservative approach implied in the design code is to estimate the column axial forces by adding all the unbalanced vertical forces in the upper stories. One alternative approach, less conservative and recommended by the current code, is to estimate the column axial forces based on the amplified seismic load expected at the mechanism-level response. Both are either too conservative or lacking technical foundation. In this paper, three combination rules for a rational estimation of the column axial forces were proposed. The idea central to the three methods is to detect the stories of high buckling potential based on pushover analysis and dynamic behavior. The unbalanced vertical forces in the stories detected as high buckling potential are summed in a linear manner while those in other stories are combined by following the SRSS(square root of sum of squares) rule. The accuracy and design advantage of the three methods were validated by comparing extensive inelastic dynamic analysis results. The mode-shape based method(MSBM), which is both simple and accurate, is recommended as the method of choice for practicing engineers among the three.

• Journal of Technology Innovation
• /
• v.19 no.1
• /
• pp.111-144
• /
• 2011

This study is to confirm the core factors of innovative capabilities and technological entrepreneurship affecting the performance of technology management and business management of small and medium-sized enterprises (SMEs). Through the consideration about the complex natures of technological innovation affecting by multidimensional factors, this study designs the research model that innovative capabilities, the performances of technology and business management are arranged in accordance with the innovation process; input-output-outcome. To meet this research purpose, the hypothesis are set up based on the previous research studies and the research samples are selected from members of the Innovative Business (INNO-BIZ) Association, located in Seoul and Geyonggi province. As a result of regression analysis to the responses gathered from 360 firms, the performance of business management is influenced positively by the technology superiority, market growth and business profitability which are the dominant factors of performance of technology management. In addition, three sub-variables of innovative capabilities such as R&D, strategic planning and learning capability, have positive effects on both the managerial performances. Innovativeness and progressiveness of technological entrepreneurship affect both the performances positively. Moreover, the co-relation between technological entrepreneurship of an innovation leader and innovative capabilities of organizational members are identified. Lastly, technological entrepreneurship has the mediating effect on the path of leading innovative capabilities to the managerial performances. In conclusion, the research results imply that technological innovation-type firms should periodically evaluate the performance of technology management which are the output of technological innovations and the reinvestment for ultimate business success. And improving and developing innovative capabilities and technological entrepreneurship is required to continuously and consistently investing and supporting resources on technological innovations at the firm-and government-level. It is considered that these are the crucial methods for securing the technologically competitive advantage of SMEs with less resources and narrow innovation range.

• Journal of Technology Innovation
• /
• v.26 no.3
• /
• pp.37-68
• /
• 2018

Since the 20th century, automobiles, which are the most common means of transportation, have been evolving as the use of electronic control devices and automotive semiconductors increases dramatically. Automotive semiconductors are a key component in automotive electronic control devices and are used to provide stability, efficiency of fuel use, and stability of operation to consumers. For example, automotive semiconductors include engines control, technologies for managing electric motors, transmission control units, hybrid vehicle control, start/stop systems, electronic motor control, automotive radar and LIDAR, smart head lamps, head-up displays, lane keeping systems. As such, semiconductors are being applied to almost all electronic control devices that make up an automobile, and they are creating more effects than simply combining mechanical devices. Since automotive semiconductors have a high data rate basically, a microprocessor unit is being used instead of a micro control unit. For example, semiconductors based on ARM processors are being used in telematics, audio/video multi-medias and navigation. Automotive semiconductors require characteristics such as high reliability, durability and long-term supply, considering the period of use of the automobile for more than 10 years. The reliability of automotive semiconductors is directly linked to the safety of automobiles. The semiconductor industry uses JEDEC and AEC standards to evaluate the reliability of automotive semiconductors. In addition, the life expectancy of the product is estimated at the early stage of development and at the early stage of mass production by using the reliability test method and results that are presented as standard in the automobile industry. However, there are limitations in predicting the failure rate caused by various parameters such as customer's various conditions of use and usage time. To overcome these limitations, much research has been done in academia and industry. Among them, researches using data mining techniques have been carried out in many semiconductor fields, but application and research on automotive semiconductors have not yet been studied. In this regard, this study investigates the relationship between data generated during semiconductor assembly and package test process by using data mining technique, and uses data mining technique suitable for predicting potential failure rate using customer bad data.

• Korean Journal of Veterinary Research
• /
• v.32 no.2
• /
• pp.175-179
• /
• 1992

To develope the methods for isolation and enumeration of lymphocyte subpopulations in pigs, we carried out the rosette-assay using sheep erythrocytes(SRBC) and Korean native goat erythrocytes(GRBC) as a target cells. To enumerate T lymphocytes, E-rosette methods were applied with RBC treated with various concentration of polymers such as Aet and Dex, singly or in combination. And to enumerate B lymphocytes, EAand EAC-rosette assay was adopted. The results were as follows; 1. E-RFR with polymer-untreated SRBC and GRBC was $32.9{\pm}7.9%$ and $31.3{\pm}9.4%$, respectively. On the other hand, RFR with 0.1M Aet plus 8% Dex treated SRBC and GRBC was increased about two-fold($67.8{\pm}7.4%$ and $69.8{\pm}8.5%$), respectively. 2. EA-RFR with SRBC and GRBC were $ 39.1{\pm}10.2%$ and $32.6{\pm}6.1%$, respectively. 3. EAC-RFR with SRBC and GRBC were $27.6{\pm}7.0%$ arld $21.0{\pm}3.2%$, respectively. These results showed that both SRBC and GRBC could be recommanded as a binding cells for rosetteassay to isolate of lymphocyte-subpopulations in pigs.

• Journal of Chest Surgery
• /
• v.37 no.9
• /
• pp.781-786
• /
• 2004

None of the currently available strategies for diagnosis and management of the pleural effusion are ideal. We tried to evaluate the validity of VEGF in differential diagnosis of the pleural effusion and find out if VEGF were correlated with the established markers. Material and Method: 35 patients with pleural effusion were divided into malignant effusion (n=10), benign effusion (n=5), infectious effusion (n=10), and pneumothorax (n=10), respectively. The pleural fluids from each group were examined for differential cell count, chemistry (glucose, protein, LDH, and ADA), and VEGF. Result: Glucose level was lower in infectious effusion compared with benign effusion (60.5$\pm$36.09 mg/dL vs. 162.0$\pm$19.80 mg/dL, p=0.011). ADA level in infectious effusion was higher compared with malignant effusion (87.9$\pm$42.62 IU/L vs. 27.7$\pm$31.04 IU/L, p=0.024). Malignant effusion (p=0.026) and infectious effusion (p=0.048) showed significantly higher level of VEGF than that of pneumothorax. VEGF level was substantially higher in malignant effusion compared with benign effusion (364.38$\pm$433.83 pg/dL vs. 53.3$\pm$22.20 pg/dL, p=NS). The pleural VEGF level did not correlate with the other markers. Conclusion: The measuring pleural VEGF may be helpful in diagnosing malignant and infectious pleural effusion that increase angiogenesis and vascular permeability, but it can not discriminate between the two. The pleural VEGF may not be correlated with the established markers. The measurement of pleural VEGF might discriminate between malignant and benign effusion.