• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.9
• /
• pp.178-185
• /
• 1994

This study describes a software-based conrol methodology eliminating low-frequency harmonics from a 3.phi. phase-controlled converter. The converter topology used in the study is capable of the phase current lagging and dealying with respect to the phase voltage. Low order harmonics are eliminated in the dc output voltage by introducing notches. The good agreements between the simulation and experimental resuls show the validity of the proposed scheme. The use of the software-based control scheme results in a simple and flexible realization of the system.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.2
• /
• pp.228-239
• /
• 1992

The purpose of the present research is to develop an efficient numerical method for the calculation of potential flow and predict the wave-making resistance for the application to ship design of tuna purse seiner. The paper deals with the numerical calculation of potential flow around the series 60 with forward velocity by the new slender ship theory. This new slender ship theory is based on the asymptotic expression of the Kelvin-source, distributed over the small matrix at each transverse section so as to satisfy the approximate hull boundary condition due to the assumption of slender body. Some numerical results for series 60, C sub(b) =0.6, hull are presented in this paper. The wave pattern and wave resistance are computed at two Froude numbers, 0.267 and 0.304. These results are better than those of Michell's thin ship theory in comparison with measured results. However, it costs much time to compute not only wave resistance but also wave pattern over some range of Froude numbers. More improvements are strongly desired in the numerical procedure.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.2
• /
• pp.10-14
• /
• 1980

In this paper, the second harmonic distortion of the DH L.D. is analyzed using dynamic and static rate equations. In this analysis the modulation current Jm is changed by varang the iinjection current with the relation of where m stands for modulation index. It is showed that relative harmonic distortion ( ) has a peak exactly at the threshold current. It is also confirmed that this method is simople and more accurate than previously reported methods in the decision of the threshold current.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.43-45
• /
• 1995

In accordance with the development of switching devices, the voltage and current signal have involved the time harmonics. But most power meter is designed to operate in sinusoidal signal. Therefore, this paper evaluate the operating state and characteristic of power meter under the voltage and current included the time harmonics, analysing the results which are obtained by means of theorical analysis and an experiment of several instruments for power measuring.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.798-799
• /
• 2015

본 논문에서는 영구자석의 형상을 변화시켜 표면 부착형 동기 전동기(Surface Permanent Magnet Synchronous Motor, SPMSM)의 토크리플을 저감하였다. 교류전동기의 경우 공극에 자속이 정현적으로 분포할수록 역기전력 파형이 정현파에 가까워지고, 토크리플이 작아진다. 위의 조건을 바탕으로, 자석의 사용 양을 동일하게 유지하면서 공간고조파를 최소화하기 위해 공극에 자속이 정현적으로 분포할 수 있도록 자석 형상에 모깎기를 적용하여 SPMSM의 최적설계를 진행하였다. 2D 유한요소해석법(Finite Element Method)을 이용하여 각 형상별 토크, 역기전력 등의 모터의 기본 특성들을 해석하여 영구자석 형상이 SPMSM의 성능에 어떠한 영향을 미치는지 분석하였다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.754-755
• /
• 2015

초고속 전동기의 경우 시스템의 경량화, 소형화를 가능하게 함으로써 에너지 변환 효율을 크게 증가시킬 수 있어 여러 산업 분야에서의 적용이 점차 증가되고 있다. 하지만 초고속 전동기의 회전자에 쓰이는 희토류 영구자석은 높은 가격과 원료 수급의 불안정성으로 인해 대량 생산에 큰 걸림돌로 작용하고 있다. 따라서 본 논문에서는 저렴한 가격과 재료 수급이 용이한 페라이트 영구자석을 이용한 7.5kW, 60000rpm급 초고속 전동기를 제시하였으며, 공간 고조파법을 사용하여 자계 특성 해석을 수행하였다. 해석 결과의 타당성은 유한요소해석 결과와의 비교를 통해 타당성을 입증하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.630-633
• /
• 2008

A particle method has been developed for analyzing the motion of 2-D floating body in waves. The particle method is based on the MPS(Moving Particle Semi-implicit) method suggested by Koshizuka et al. (1996), and the flow motion coupled with the motion of floating body can be simulated. The wavemaker and wave absorber are installed at the inflow and outflow boundaries in a computational domain, respectively. The motion characteristics of a floating body is investigated numerically under the various computational conditions.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.1E
• /
• pp.37-44
• /
• 1994

A method for measuring the loudspeaker distortions at low frequencies without an anechoic is proposed. This method is based on the fact that the n-th harmonic distortion outside the enclosure is boosted by 40log n dB compared to that inside the enclosure. The applicable frequency range is extended by cancelling the effect of standing wave inside the enclosure. Causes of measurement error are also analyzed.

• Journal of Navigation and Port Research
• /
• v.28 no.5
• /
• pp.353-358
• /
• 2004

A transient irregular wave was designed based on ISSC spectrum The designed wave was generated in the towing tank and ,the roll motion of a model was measured A method to predict the maximum roll motion, expected in the short-term sea state, was investigated with comparison of the theoretical and experimental results.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.546-550
• /
• 2002

본 논문에서는 다이오드 정류기에 단상인버터와 변압기를 이용하여 영상고조파 전류를 주입함으로서 순수한 정현파 입력전류를 얻을 수 있는 새로운 방식의 고조파 저감기술을 제안한다. 본 방식은 주 전력의 흐름에 직렬로 스위칭소자가 연결되지 않아 전력손실이 적으며 보조회로로서 사용된 변압기의 턴비를 조정하면 인버터 스위치의 전류정격을 작게 구현할 수 있다. 본 방식의 타당성을 실험을 통하여 입증하였다.