• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.6
• /
• pp.383-390
• /
• 2021

The experiments in coastal engineering are very complex and a lot of components should be concerned. The experience has an important role in the successful execution. Hydraulic model experiments have been improved with the development of the wave generator and the advanced measuring apparatus. The hydraulic experiments have the advantage, that is, the stability of coastal structures and the hydraulic characteristics could be observed more intuitively rather than the numerical modelings. However, different experimental results can be drawn depending on the model scale, facilities, apparatus, and experimenters. In this study, two-dimensional hydraulic experiments were performed to suggest the guide of the test wave(random wave) generation, which is the most basic and important factor for the model test. The techniques for generating the random waves with frequency energy spectrum and the range for the incident wave height [(H_S)_M/(H_S)_T = 1~1.05] were suggested. The proposed guide for the test wave generation will contribute to enhancing the reliability of the experimental results in coastal engineering.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.1
• /
• pp.112-118
• /
• 1987

This study was carried out to investigate the effects of early planting and polyethylene film (P.E) mulch on early maturing soybean of Korean native cultivar Kyeonggi No. 114 in the Kyeonggi area. It was planted four times at the ten days interval from April I to April 30 in 1985 and 1986. The average soil temperature was 1-5$^{\circ}C$ higher under the polyethylene film mulch condition than the conventional cultural practice condition. Soil moisture content also was higher under P.E mulch condition. Days to emergence was shortened 5-16 days and days to flowering was shortened 3-5 days. The fresh pod yield was increased 12% more at the planting date of April 1 and April 10. Income was increased 70, 83, more at the planting date of April 1 and April 10 under the polyethylene mm mulch conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.4
• /
• pp.428-436
• /
• 1995

The studies were conducted to escape for laber concentration during rice harvest and barley sowing through the scattering sowing before rice harvest(SS) compared to the drilling on high ridge(DS) of barley from 1990 to 1994. There were longer in plant height and more in tiller number under the SS than those under the DS of barley while cold-injured leaves of barley were inversely affected by two different sowing methods. The barley growth was more vigorous in the DS. There was similar at heading and maturing date. The grain yield of barley was lower in the SS by 20.6% which was resulted from the reduction of spike number per m$^2$ and number of grain per spike. There was not significant at growth and yield for sowing date before rice harvest. The variation of successive years on growth, yield and its components were higher in the SS than those in the DS.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.2
• /
• pp.157-168
• /
• 2009

In this paper, a photovoltaic system is designed with a step up chopper and single phase PWM(Pulse Width Modulation) voltage source inverter. Where proposed Synchronous signal and control signal was processed by one-chip microprocessor for stable modulation. The step up chopper operates in continuous mode by adjusting the duty ratio so that the photovoltaic system tracks the maximum power point of solar cell without any influence on the variation of insolation and temperature because solar cell has typical voltage and current dropping character. The single phase PWM voltage source the inverter using inverter consists of complex type of electric power converter to compensate for the defect, that is, solar cell cannot be developed continuously by connecting with the source of electric power for ordinary use. It can cause the effect of saving electric power. from 10 to 20[%]. The single phase PWM voltage source inverter operates in situation that its output voltage is in same phase with the utility voltage. In order to enhance the efficiency of photovoltaic cells, photovoltaic positioning system using sensor and microprocessor was design so that the fixed type of photovoltaic cells and photovoltaic positioning system were compared. In result, photovoltaic positioning system can improved 5% than fixed type of photovoltaic cells. In addition, I connected extra power to the system through operating the system voltage and inverter power in a synchronized way by extracting the system voltage so that the phase of the system and the phase of single-phase inverter of PWM voltage type can be synchronized. And, It controlled in order to provide stable pier to the load and the system through maintaining high lurer factor and low output power of harmonics.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3B
• /
• pp.289-301
• /
• 2009

In this work, wave run-up heights and resultant wave forces on a vertical revetment due to tsunami (solitary wave) are investigated numerically using a numerical wave tank model called CADMAS-SURF (CDIT, 2001. Research and Development of Numerical Wave Channel (CADMAS-SURF). CDIT library, No. 12, Japan.), which is based on a 2-D Navier-Stokes solver, coupled to a volume of fluid (VOF) method. The third order approximate solution (Fenton, 1972. A ninth-order solution for the solitary wave. J. of Fluid Mech., Vol. 53, No.2, pp.257-271) is used to generate solitary waves and implemented in original CADMAS-SURF code. Numerical results of the wave profiles and forces are in good agreements with available experimental data. Using the numerical results, the regression curves determined from the least-square analysis are proposed, which can be used to determine the maximum wave run-up height and force on a vertical revetment due to tsunami. In addition, the capability of CADMAS-SURF is demonstrated for tsunami wave forces acting on an onshore structure using various configuration computations including the variations of the crown heights of the vertical wall and the position of the onshore structure. Based on the numerical results such as water level, velocity field and wave force, the direct effects of tsunami on an onshore structure are discussed.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.4
• /
• pp.303-308
• /
• 2016

This study was carried out to determine the effects of application levels of fertilizer and sowing methods on yields and nutritive values of Italian ryegrass (IRG) in early spring. Five fertilizer levels were used: Treatment 1, 100-80-80 kg/ha; Treatment 2, 120-100-100 kg/ha; Treatment 3, 140-120-120 kg/ha; Treatment 4, 160-140-140 kg/ha; Treatment 5, 140-120-120 kg/ha of $N-P_2O_5-K_2O$ with silicate fertilizer 200 kg/ha. Dry matter (DM) yield was 8,330 kg/ha in Treatment 5, 7,686 kg/ha in Treatment 4, and 7,347 kg/ha in Treatment 3. There was no significant difference in total digestible nutrients (TDN) content. The content of crude protein was the highest in Treatment 5. Dry matter ratio was the lowest in Treatment 5. In Treatment 3, DM yield was 7,347 kg/ha, when total amounts of fertilizers were applied at one time. However, DM yield was 7,405 kg/ha, when 50% of pre-planting fertilizer and 50% of supplementary fertilizer were applied at different time. There was no significant difference between total application and split application of fertilizers. However, DM yield was 9,469 kg/ha in application treatment with 100 kg/ha of additional urea at three to four leaf stages of IRG. Regarding DM yield by sowing methods of IRG, the following order was found: drill seeding (8,176 kg/ha) > rotary-broadcast seeding-stamping (7,957 kg/ha) > rotary-broadcast seeding (7,810 kg/ha) > broadcast seeding (7,347 kg/ha) > broadcast seeding-rotary (7,034 kg/ha). DM yield (59.57%) was the lowest in broadcast seeding-rotary. Crude protein content was the highest with rotary work but the lowest with broadcast seeding.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.2
• /
• pp.125-130
• /
• 2005

This study was conducted from March 16 to July 6 in 2004 at Jeju Island to investigate the influences of sowing dates(on March 16, March 26, April 5, April 15 and April 25) on creeping bentgrass vegetation. The result obtained were summarized as follows; Plant height was 22.7 cm at March 16 planting. It was longest but after that planting, plant height gradually shorted. Then it was shortest at April 25 planting(16.6 cm). Root length and Minolta SPAD-502 chlorophyll reading value were directly proportional plant height response. Leave and root weight were greatest at March 16 planting. It were 1,373 kg /10a and 2,374 kg /10a, respectively. These weight decreased gradually as planting was delayed from March 16 to April 25. Degree land cover and density of creeping bentgrass were $98.0\%$ and $99.3\%$, respectively, at March 16. After that planting they were decreased ($97.5\%$, $98.7\%$). But degree land cover and density of weed tended to increased gradually as the planting was delayed. The number of weed species were increased from March 16 to April 25. It showed increase that Poa annua, Stellaria media and Chenopodium album var. centrorubrum(at March 16 planting), Poa annua, Digitaria adscendens and Chenopodium album var. centrorubrum(at March 26 planting), Digitaria adscendens, Chenepodium album var. centrorubrum and Stellaria media(at April 5 planting), Digitaria adscendens, Stellaria media and Chenopodium album var. centrorubrum(at April 15 planting), Digitaria adscendens, Polygonum hydropiper, Chenopodium album var. centrorubrum(at April 25 planting). Based on the these findings, optimum sowing date for growth of creeping bentgrass seems to be about early seeding in atmospheric phenomena and volcanic ash soils of Jeju island.

• Current Research on Agriculture and Life Sciences
• /
• v.17
• /
• pp.21-29
• /
• 1999

This study was carried out to determine the promising method for the production of mother bulbs using garlic bulbs at the experimental field of Ange high school, Eusung in Korea from 1996 to 1998. The bulbs and bulbils were taken from a local cultivar 'Eusung' garlic. The growth of bulbil and yield potential were compared with different harvesting times and cultivation methods of bulbil. The harvesting time of bulbils which were capable of producing the mother bulbs was ranged from 15 days to 30 days after the emergence of flower stalks. The best results based on the yield and number of bulbs were obtained from the bulbils sampled at the just before garlic harvesting, 30 days after flower-stalk emergence. The mulching with transparent polyethylene(PE) film in bulbil cultivation was more effective for the plant growth and bulb formation than that with black PE film. The PE mulching from 30 days after seeding of bulbils to 30 days (late-April) before bulb harvesting was the moot effective for the increase of bulb yield. In the cultivation of garlic bulbils, application of lime (150 kg/10a) and compost (3,000 kg/10a) without any chemical fertilizers produced more bulbs in comparison with the standard level of fertilizer (N - $P_2O_5$ - $K_2O$ - compost - lime = 24.8 - 8.0 - 19.2 - 3,000 - 150 kg/10a). It was determined that the involucre seeding and assemble seeding of bulbils was effective and labour-saving methods for the production of mother bulbs from garlic bulbils. Input of labour force for the involucre seeding was decreased up to 61% as compared with the conventional drill seeding of bulbils. Mean yield from the cultivation of bulbil-derived single cloves was remarkably increased up to 95% in comparison with that of the common cloves. The larger size of single clove produced more yields, and the optimum planting density of single clove was $20{\times}10cm$. The cloves differentiated directly from bulbil showed to have higher yield potential than that from common cloves.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.2
• /
• pp.131-136
• /
• 1985

The calculation of the resulting fluid motion is an important problem of ship hydrodynamics. For a partially immersed body the condition of constant pressure at the free surface can be linearized. The resulting linear boundary-value problem for the velocity potential is the Neumann-Kelvin problem. The two-dimensional Neumann-Kelvin problem is studied for the half-immersed circular cylinder by Ursell. Maruo introduced a slender body approach to simplify the Neumann-Kelvin problem in such a way that the integral equation which determines the singularity distribution over the hull surface can be solved by a marching procedure of step by step integration starting at bow. In the present pater for the two-dimensional Neumann-Kelvin problem, it has been suggested that any solution of the problem must have singularities in the corners between the body surface and free surface. There can be infinitely many solutions depending on the singularities in the coroners.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.2
• /
• pp.123-130
• /
• 2002

A field experiment was carried out to determine the effect of application level of animal manure on the nitrate nitrogen concentration, sugar content and animal intake of forage sorghum $\times$ sudangrass hybrid (Sorghum bicolor (L.) Moench, cv. Pionee. 988) in 1995. The application amount of animal manure were 50, 100 and 150MT in cattle manure, 20, 40 and 80MT in swine manure, and 10, 20 and 40MT/ha in poultry manure. Non-application plot(control) was involved. The nitrate nitrogen concentration was increased with increasing of application level of animal manure(P<0.05). Average nitrate nitrogen concentration was 397, 512, and 609mg/kg at low, medium and high application level of animal manure. The nitrate nitrogen concentration by plant height was 438mg/kg at 50~60m of plant height, 454mg at 100~120cm, and 418mg at 200~220cm. The nitrate nitrogen concentration of stems was 376mg, and significantly higher than that(135mg) of leaves(P<0.05) regardless of animal manure type, and lower parts of stems and leaves were significantly higher than those of upper parts of plants(P<0.05). Average nitrate nitrogen concentration of leaves was 151mg at lower, and 58mg at upper parts of plants, and the concentration of stems was 357mg at lower, 511mg at middle, and 610mg at upper parts of plants. The sugar contents of sorghum $\times$ sudangrass hybrid was decreased with increasing of application level of animal manure(P<0.05). Average sugar content was 4.9, 4.4, and 4.3。 at low, medium and high application level of animal manure. The sugar content by plant height was 3.9。 at 50~60 and 100~120cm of plant height, and 6.1。 at 200~220cm of plant height. Animal intake of sorghum $\times$ sudangrass hybrid was decreased greatly with increasing of application level of animal manure. Average intake was 73.9, 55.7, and 52.3% at low, medium and high application level of animal manure. The intake by animal manure type was 73.7% in cattle, 59.7% in swine and 62.5% in poultry manure.