• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.5
• /
• pp.653-662
• /
• 1999

In this paper, subharmonically injection locked oscillator(SILO) was designed and measured. SILO with series feedback was designed using Two Signal Method(TSM). The free-running oscillator frequency was 9.4 GHz with 6 dBm output power. In case of injection, the multiplied injected signal locked the free-running frequency. The locked signal output power was higher than any other spurious response at least 40 dB. The locking range was 220MHz (second subharmonic locking), 100 MHz(4th subharmonic locking), and phase noise was -111 dBc/Hz, -104 dBc/Hz at 100kHz offset, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.4B
• /
• pp.406-409
• /
• 2001

본 논문에서는 IMT-2000 대역에서 전방급전 전력증폭기의 선형성을 개선하여 효율과 대역폭을 극대화 하기 위해 Photonic Bandgap(PBG), 전치왜곡, 2차고조파 튜닝 방식으 f동시에 주 증폭기에 적용하였다. 2차 하모닉 성분이 2차고조파 튜닝 방식에 의해 우수하게 제거되고, 3차 하모닉 성분이 전치왜곡 방식에 의해 제거되며 출력단위 PBG느 s고아대역 특성으로 4차 하모닉 이상까지 제거하는 우수한 특성을 보여주었다. 총체적으로 기존의 전방급전 전력증폭기보다 IMD가 최고 15dBc, 효율은 4%, 대역폭은 2배이상 확대됨으로 전력효율과 대역폭을 극대화시킬 수 있었다.

• Journal of Navigation and Port Research
• /
• v.46 no.6
• /
• pp.471-482
• /
• 2022

This study aims to investigate the characteristics of wave generation in a deep ocean engineering basin and to develop a meta-model of the transfer function of the wavemaker that reflects the geometric characteristics of the deep ocean engineering basin. To this end, the two-dimensional frequency domain boundary element method was applied to achieve an efficient analysis that reflects the geometric characteristics of the deep ocean engineering basin. The developed numerical method was validated through comparison with the analytical solution. Numerical analyses were conducted for the boundary value problem of the wavemaker according to various periods and the positions of the movable bottom. The numerical results were used to investigate the effect of the geometric characteristics of the deep ocean engineering basin on the transfer function of the wavemaker, and the effect of depth on wave generation was checked by changing the position of the movable bottom. To efficiently utilize the various results of the boundary element method, a meta-model, an approximate model of the transfer function of the wave maker, was developed using a thin plate spline interpolation model. The validity of the developed meta-model was confirmed through a comparison of the results of the model tests.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.78-84
• /
• 2013

The primary objective of the current work is to develop efficient numerical code to assess the resistance performance of the twin hull form. Resistance performance for the two different twin hull forms with asymmetric and symmetric mono hull using developed code are evaluated. Numerical calculations and model tests have been compared to validate a developed code used in the current work. Comparison were carried out through sinkages of the bow and stern, trim angle and wave-making resistance. Comparative analysis regarding hydrodynamic characteristic of different twin hull forms is worthy of application in the hull form development stage.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.4
• /
• pp.68-75
• /
• 2013

This paper investigates the characteristics of waves generated by a flap-type wave maker in a two-dimensional wave channel. Measurements are carried out for various water depths, wave heights, periods, and lengths capacitance-type wave height gages. The experimental results are shown to satisfy the dispersion relation of the linear wave theory. For waves with a small height and long period, the wave profiles agree well with those of the linear wave theory. However, as the wave height and period become higher and shorter, respectively, it is shown that the wave profiles measured in the present experiments are different from the linear wave profiles, and the measured wave heights are smaller than the target wave heights, which may be due to the non-linearity of the waves. As the wave progresses toward the channel end, the wave height gradually decreases. This reduction in the wave height along the wave channel is explained by the wave energy dissipation due to the friction of the side walls of the channel. The performance of the wave absorber in the channel is found to be acceptable from the results of the wave reflection tests.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.462-469
• /
• 2001

In this paper, local oscillator in K band using low frequency noise upconversion gain anaylsis was designed and measured. We extended Two Signal Method(TSM) to estimate upconversion gain and resulting phase noise. To confirm the validity of the proposed method, a free-running oscillator which had low upconversion gain was designed. The measured oscillation frequency was 23.42 GHz and phase noise at 1 MHz of offset was -105.2 dBc/Hz. Also, this oscillator was operated for subharmonic injection locked osci1lator(SILO). In this case, SILO showed ideal frequency multiplier phase noise characteristics at low subharmonic injection power level.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.5
• /
• pp.381-388
• /
• 2014

Our aim was to simulate ocean waves in a small-size wave flume and observe the motion of a cylindrical floating body placed in an offshore environment. To precisely visualize the oscillation of the body, a set of light-emitting diode illuminators and high-speed charge-coupled device camera were installed in the flume. Spectral analysis was performed of the movement of the floating body. The wave generator and absorbers worked well to simulate stable regular waves. As the period of the oncoming waves changed, the movement of the floating body substantially differed when tethered to a tension-leg mooring cable. In particular, when connected to the tension-leg mooring cable, the natural frequency of the floating body suddenly appeared at 0.391 Hz as the wave period was increased.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.1
• /
• pp.28-33
• /
• 1996

This experiment was carried out at National Crop Experiment Station in 1994 to obtain basic information of growth characters and yield of rice under various seeding methods in direct seeding on dry paddy. Hwaseongbyeo sown on April 27 by flat drill seeding, high ridged drill seeding and hill seeding under different seed conditions, soil convering after seeding and irrigation methods. Nitrogen applied 150kg /ha by 3 times split application at rate of 40:30:30％ (basal: 5th leaf stage:panicle initiation stage). Seedling stands were higher in flushed irrigation water after seeding than in irrigation at 3rd leaf stage, and it also was higher in high ridged drill seedings than in flat drill seedings. Days for seedling stand, heading date were shorten 6~10 days, 2~3 days by flushed irrigation water after seeding, respectively. Number of tiller was more in high ridged drill seedings than conventional seedling method(Flat drill seeding ＋ intact seed ＋ soil covering after seeding ＋ irrigation at 3rd leaf stage after seedling stand) at early growth stage, but the most tiller number was highest in developed seeding method(Flat drill seeding ＋ soaked seed ＋ non soil covering after seeding ＋ fulshed irrigation water after seeding) at heading stage among used seeding methods. Lodging index was slightly high in high ridged drill seeding and conventional seeding. Field lodging was degree 1 in high ridged drill seedings and developed seeding, Milled rice yield in developed seeding was increased 7％ compaired with conventional seeding(5.35t /ha).

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.209-210
• /
• 2015

High Voltage Direct Current(HVDC) System용 AC 필터는 특정 고조파 영역에서 낮은 임피던스를 제공하여 AC 계통으로 유입되는 고조파를 억제시킴과 동시에 무효전력의 공급원으로서의 역할도 수행한다. 대부분의 전류형 HVDC System은 12개의 Pulse로 동작하기 때문에 $12n{\pm}1$차의 특성고조파를 발생시키는데 HVDC System에서는 이러한 특성고조파들을 저감시키기 위한 Harmonic AC Filter가 주로 사용된다. 본 논문에서는 HVDC System용 AC 필터를 설계할 때 고조파 저감을 고려한 다목적 최적화 알고리즘을 제시함으로써, 향후 시스템의 안전성과 효율성 측면에서 기여할 수 있는 실제 HVDC System용 AC 필터 설계 적용에 큰 도움이 될 것으로 기대된다.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.216-218
• /
• 2006

본 논문에서는 연료전지용 듀얼 부스트 컨버터의 전압제어루프의 피드백 루프에 디지털 필터를 도입하여 부하에 의해 발생하는 출력전압의 저고조파 리플성분을 제거한 측정값을 사용함으로써 입력전류의 저고조파 리플을 제거하고, 전류제어루프에 predictive deadbeat 제어기법을 적용하여 제어주기와 제어알고리듬 계산에 의한 시간적 지연에 의해 발생되는 동적응답특성의 저하를 최소화한다. 센서를 사용하는 대신 연료전지 스택에 공급되는 수소와 공기의 압력과 스택의 출력전류에 결정되는 연료전지의 전압-전류 특성곡선을 이용하여 부스터 컨버터의 입력전압을 계산하고 전류를 제어함으로써 연료전지 시스템의 성능을 최적화한다.