• The Korean Journal of Nuclear Medicine
• /
• v.32 no.1
• /
• pp.81-88
• /
• 1998

The purpose of this study was to examine the radiolabeling and biodistribution of $^{188}Re(V)$-DMSA as a therapeutic cancer radiopharmaceutical. We made a DMSA kit($NaHCO_3$ 1.5 mg, meso-2,3-dimercaptosuccinic acid 1.0 mg, L(+)-ascorbic acid 0.7 mg, $SnCl_2{\cdot}2H_2O$ 0.34 mg, pH 2.9) for labeling with $^{188}Re$. In this kit, $^{188}ReO_4{^-}$ 5 mCi/2 ml added and boiled at $100^{\circ}C$ for 3 hr in water bath. The final pH adjusted to 7.5 with 7% $NaHCO_3$ solution. We checked the labelling efficacy with TLC-SG(n-butanol : acetic acid : $H_2O$ = 3 : 2 : 3) and examined the stability both in room temperature and in serum at $37^{\circ}C$. Biodistribution(1, 3, 13, 24, 48 hr) of $^{188}Re(V)$-DMSA compound was evaluated in Sarcoma 180 tumor-bearing mice. Each labeling efficiency and stability at room temperature for 48 hours was over 98% and 95%, respectively. The stability in serum were 82%(6 hr) and 85%(48 hr). Tumor uptake of $^{188}Re(V)$-DMSA in Sarcoma 180-bearing mice were $0.66{\pm}0.15%$(1 hr), $0.51{\pm}0.10%$(3 hr), $0.19{\pm}0.05%$(24 hr) and $0.13{\pm}0.02%$(48 hr). These result are consistent with those of $^{99m}Tc(V)$-DMSA which were reported previously. In conclusion, $^{188}Re(V)$-DMSA may be a useful therapeutic radiopharmaceutical for treating some cancers and metastatic bone lesion.

• Journal of Chest Surgery
• /
• v.43 no.6
• /
• pp.655-662
• /
• 2010

Background: Despite the rapid expansion of percutaneous endovascular repair, open surgical repair is still recognized as an option to achieve a cure. We retrospectively analyzed over a 6 year period the surgical outcomes, the complications and the mortality-related factors for patients with abdominal aortic aneurysms. Material and Method: We analyzed 36 patients who underwent surgery for abdominal aortic aneurysms between May 2001 and June 2005, and between April 2007 and November 2009. The indications for surgery were rupture, a maximal aortic diameter > 50 mm, and medically intractable hypertension or pain. Result: The mean patient age was $69.67{\pm}6.97$ years (range: 57 to 84 years). Thirty two patients (88.9%) were males and 4 patients (11.1%) were females. Extension to the iliac artery existed in 28 patients (77.8%). Thirteen patients (36.1%) had ruptured aortic aneurysms. The mean maximal diameter of the aorta was $73.7{\pm}13.3$ mm (60 to 100 mm). Surgery was performed by a midline laparotomy and 10 patients (27.8%) underwent emergency surgery. The mortality rate was 8.3%; the mortality rate for the patients with ruptured aneurysms was 23.1 % and the mortality rate for patients with unruptured aneurysms was 0%. The postoperative complications included wound infection (3 cases), sepsis (2 cases), renal failure (2 cases) and pneumonia (1 case). Unstable vital signs, pre-operative transfusion, ruptured aneurysm, emergency surgery, comorbidity (DM and syncope) and complications (sepsis and renal failure) were the statistically significant mortality-related factors (p < 0.05). Conclusion: Emergency surgery for ruptured aortic aneurysms continues to have high mortality, but the unruptured cases are repaired with relative safety. Even though endovascular aortic repair is the trend for abdominal aortic aneurysms, an elective operation of the unruptured aneurysms could decrease the procedure's morbidity and the inconvenient for repeat evaluation with good surgical results.

• Development and Reproduction
• /
• v.13 no.2
• /
• pp.105-114
• /
• 2009

Ethane 1,2-dimethane sulfonate (EDS) is a well-known alkylating agent used as selective Leydig cell (LC) toxicant to create a testicular dysfunction model. Previous studies including our own clearly demonstrated the dramatic weight loss of the androgen dependent accessory sex organs such as epididymis, seminal vesicle and prostate gland in this 'LC knock-out' rats. The present study was performed to evaluate the effect of EDS administration on histological changes of the epididymis, seminal vesicle and prostate in adult rats. Adult male Sprague-Dawley rats (350$\sim$400 g B.W.) were injected with a single dose of EDS (75 mg/kg, i.p.) and sacrificed on weeks 0, 1, 2, 3, 4, 5, 6 and 7. Tissue weights (testis, epididymis, seminal vesicle and prostate gland) were measured. The histological changes of tissue were observed by a light microscopy using hematoxylin & eosin staining. Weights of the reproductive and accessory organs progressively declined after the EDS treatments (weeks 1, 2 and 3). After this, the decrease was stopped, then gradually returned to the normal levels. There was a partial (about 60%) recovery of the epididymis weight during weeks $6{\sim}7$. The cross section of epididymis revealed an increase in thickness of the epithelium during weeks $1{\sim}3$. In contrast, considerable reduction of epithelial thickness in seminal vesicle was observed during same period. Similarly, a reduction in thickness of prostate epithelial layer was found during weeks $1{\sim}3$, then it was back to normal thickness after week 4. Taken together, the present study demonstrated that the temporally induced androgen-deficiency by EDS treatment could result the prominent alterations in histology of the accessory sex organs. Further studies on the physiological and molecular regulation of these androgen-sensitive organs using EDS model will be helpful to understand the normal and pathological development and differentiation mechanism of these organs.

• Clinical and Experimental Pediatrics
• /
• v.45 no.6
• /
• pp.754-763
• /
• 2002

Purpose : The incidence of type 2 diabetes in children and adolescents has been reported to increase recently. The aim of this study is to investigate the clinical features of type 2 diabetes developing during childhood and adolescent period. Methods : The medical records of 33 patients with type 2 diabetes were reviewed. We analysed clinical manifestations, demographic data, and modes and responses of treatment. Results : Age at diagnosis was $13.4{\pm}1.8$ years. Seventy percent of patients revealed pubertal signs at diagnosis. Half of the patients had BMI more than $25kg/m^2$. Seventy-three percent of patients had family history of type 2 diabetes. Acanthosis nigricans were found in 18% of patients. Nineteen(57.6%) patients were diagnosed incidentally by random urine or blood glucose test without any typical diabetic symptom or sign. The modes of therapy to control hyperglycemia were insulin alone(75.8%), oral hypoglycemic agents alone(9.1%), insulin and oral hypoglycemia agents(9.1%), and only diet with exercise(6%). At the time of investigation, 45.5% of patients were not using insulin. The typical diabetic symptoms at diagnosis were more prevalent in patients who required insulin for more than two years than patients who did not(P<0.05). Conclusion : The development of type 2 diabetes in children and adolescents is possibly related to puberty, obesity, family history, and defects in insulin secretion rather than insulin resistance. Many children and adolescents with type 2 diabetes required insulin initially and some of them could discontinue. More than half of the patients were diagnosed as diabetes without any typical symptom or sign, which might be one of the predictive factors of the prolonged insulin requirement.

• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.28-33
• /
• 2007

We measured cloud points of Poly(methylmethacrylate) (PMMA) in various solvents using the high-pressure variable volume view cell apparatus. The solvents used for dissolving PMMA were chlorodifluoromethane (HCFC-22), dimethylether (DME), 1,1,1-trifluoroethane (HFC-143a), 1,1-difluoroethane (HFC-152a) and 1,1,1,2-tetrafluoroethane (HFC-134a), and the effect of $CO_2$ concentration on the phase behavior of $PMMA+HCFC-22+CO_2$ system and $PMMA+DME+CO_2$ system was observed. PMMA was dissolved well in HCFC-22 from about 340 K, 5MPa and in DME from about 300 K, 28MPa. However, PMMA was not dissolved at all up to 423.15 K, 160MPa in the other fluorine compound such as HFC-l43a, HFC-152a and HFC-134a. PMMA+HCFC-22, $PMMA+HCFC-22+CO_2$ and PMMA+DME systems exhibit the lower critical solution temperature (LCST) behavior, however, $PMMA+DME+CO_2$ system exhibits the upper critical solution temperature (UCST) behavior. In the $CO_2$ mixture, the cloud point pressure of PMMA was increased dramatically proportional to the amount of $CO_2$ added, and from this result, it was known that $CO_2$ could be used as an antisolvent for fabricating PMMA nano-particles. And the cloud point of PMMA could be controlled by changing the concentration of $CO_2$.

• Resources Recycling
• /
• v.9 no.4
• /
• pp.16-27
• /
• 2000

In order to produce raw material powder of advanced magnetic material by spray roasting process, newly modified spray roasting system was developed in this work. In this spray roasting system, raw material solution was effectively atomized and sprayed into the reaction furnace. Also, uniform temperature distribution inside reaction furnace made thermal decomposition process fully completed, and produced powder was effectively collected in cyclone and bag filter. This system equipped with apparatus which can purify hazard produced gas. In this study complex acid solution was prepared by dissolution of mill scale and ferro-Mn into the acid solution, and the pH of this complex acid solution was controlled about to 4. It was conformed that mill scale and ferro-Mn containing a lot of impurities such as $SiO_2$, P and Al could be used as raw material by reducing the impurities content of complex acid solution below 20 ppm. Complex oxide powder of Fe-Mn system was produced by spraying purified complex acid solution into the spray roaster through nozzle, and the variations of produced powder characters were studied by changing he reaction conditions such as reaction temperature, the injection velocity of solution and air, nozzle tip size and concentration of solution. The morphology of produced powder had spherical shape under the most experimental conditions, and concentration of solution. The morphology of produced powder has spherical shape under the most experimental conditions, and the composition and the particle size distribution were almost uniform, which tells the excellence of this spray roasting system. The grain size of most produced powder was below 100 nm. From the above results, it will be possible to produce ultra fine oxide powder from the chloride of Fe, Mn, Ni, Cu and rare earth by using this spray roasting system, and also to produce ultra fine pure metal powder by changing reaction atmosphere.

• Asia Marketing Journal
• /
• v.14 no.1
• /
• pp.25-51
• /
• 2012

Researches about the relationship between SST(Self Service Technology) and TRI(Technology Readiness Index) have been carried out after TRI was developed by Parasuraman and his colleagues(2000). We hypothesize Consumer Readiness can also influence consumer's motivation, attitude, and intent to use SST. Currently, there has been no research on this subject. In this study, we investigated the relationship between TR, Consumer Readiness and SST Core Attitudinal Model which Dabholkar & Bagozzi(1994) proposed. The researchers also investigated moderating effects of consumer traits and situational factors to verify the acceptance of such forms of service delivery by all kinds of consumers and under different situational contexts. Self consciousness, the need for interaction with an employee, and the technology anxiety were used as consumer trait variables. Perceived waiting time and perceived crowding were used as situational variables. 380 questionnaires were distributed to a sample group of people in their 20's and 30's, and the data were analyzed with structural equation model using AMOS 18.0 program. All of Cronbach's alpha values representing reliabilities were satisfactory. The values of Composite Reliability(CR) and Average Variance Extracted(AVE) also showed the above criteria, thus providing evidence of convergent validity. To confirm discriminant validity among the constructs, confirmatory factor analysis and correlations among all the variables were examined. The results were satisfactory. The results of this study are summarized as follows. 1. Optimism and innovativeness of TR partially influenced the motivation to use SST. People who tend to be optimistic use SST because of ease of use and fun. The innovative however, usually use SST due to its performance. However, consumer readiness of role clarity, ability and self-efficacy influence all the components of motivation to use SST, ease of use, performance and fun. The relative effect of consumer readiness on the motivation to use SST was much stronger and more significant than that of TR. No other previous studies have examined the effects of Consumer Readiness on SST usage motivation, attitude and intention. It is academically meaningful that the researchers verified that Consumer Readiness is the important precedent construct influencing the self service technology core Attitudinal Model. Our findings suggest that marketers should consider fun and ease of use attributes to promote the use of self service technology. In addition, the SST usage frequency will rise rapidly when role clarity, ability, and self-efficacy which anybody can easily handle SST is assured. If the SST usage rate is increased, waiting times for customers could be decreased. Shorter waiting time could lead to higher customer satisfaction. It may also result in making a long-term profit owing to the reduced number of employees. Thus, presentation of using SST by employees or videos showing how to use it will promote the usage attitude and intent. 2. In SST core attitudinal model, performance and fun factors among SST usage motivation affected attitudes of using SST. The attitude of using SST highly influenced intent to use SST. This result is consistent with previous researches that dealt with the relationship between motivation, attitude and intention. Expectation of using SST could result in good performance just like the effect of ordering menu to service employees and to have fun since fun during its use could promote more SST usage rate. 3. In the relationship among motivation, attitude and intent in SST core attitudinal model, the moderating effect of consumer traits(self-consciousness, need for interaction with service employees and technology anxiety) and situational factors(perceived crowding and perceived waiting time) were tested. The results also supported the hypothesized moderating effects except perceived crowding. The highly self-conscious tended to form attitudes to use SST because of its fun compared to those who were less self-conscious because of its performance. People who had a high need for interaction with service employees tended to use SST for its performance. This result indicates that if ordering results are assured, SST is easily accessible to even consumers who have a high need for interaction with a service employee. When SST is easy to use, attitudes strengthen intent among people who had a high level of anxiety of technology. People who had low technology anxiety formed attitudes to use SST because of its performance. Service firms must ensure their self service technology is designed to be easy to use for those who have a high level of technology anxiety. Shorter perceived waiting times strengthened the attitude to use self service technology because of its fun. If the fun aspect is assured, people willing to use self service technology even perceive waiting time to be shorter than it actually is. Greater perceived waiting times form higher level of intent to use self service technology than those of shorter perceived waiting times. This implies that people view self service technology as a faster alternative to ordering service employees. The fun aspect of self service technology will attract a higher rate of usage for self service technology. 4. It has been proven that ease of use, performance and fun aspects are very important factors in motivation to form attitudes and intent to use self service technology regardless of the amount of perceived waiting time, self-consciousness, need for interaction with service employees, and technology anxiety. Service firms must consider these motivation aspects(ease of use, performance and fun)strongly in their promotion to use self service technology. Ease of use, assuring absolute performance compared to interaction with service employees', and adding a fun aspect will positively strengthen consumers' attitudes and intent to use self service technology. Summarizing the moderating effects, fun is the most valuable factor triggering SST usage attitude and intention. Therefore, designing self service technology to be fun will be the key to its success. This study focused on the touch screen self service technology in fast food restaurant. Although it has its limits due to the fact that it is hard to generalize the results to any other self service technology, the conceptual framework of this study can be applied to future research of any other service site.