• 한국해안·해양공학회논문집
• /
• 제23권1호
• /
• pp.63-69
• /
• 2011

본 연구에서는 일정한 공극율을 갖는 투과성 그물망으로 이루어진 원통형 양식시설물에 작용하는 파랑하중을 고유함수전개법을 사용하여 해석하였다. 그물망에서의 경계조건식으로 그물망을 통과하는 속도값은 그물망 전후의 압력차에 선형적으로 비례한다는 Darcy의 법칙을 적용하였다. 그물망의 공극율 계수와 양식시설물의 잠긴 위치(부상식, 착저식)를 변화시키면서 양식시설물에 작용하는 파랑하중과 파도응답을 살펴보았다. 착저식 양식시설물에 작용하는 파랑하중이 부상식과 비교하여 크게 감소하며, 그물망의 공극율이 양식시설물의 파랑하중과 양식시설물 주변의 파형을 줄이는데 중요한 역할을 함을 밝혔다.

• 한국환경과학회지
• /
• 제15권7호
• /
• pp.677-688
• /
• 2006

Currently, the application of $TiO_2$ photocatalyst has been focused on purification and treatment of wastewater. However, the use of conventional $TiO_2$ slurry photocatalyst results in disadvantage of stirring during the reaction and of separation after the reaction. And the usage of artificial UV lamp has made the cost of photocatalyst treatment system high. Consequently, we studied that solar light/$TiO_2$ film system was designed and developed in order to examine disinfection characteristics of sewage wastewater treatment. The optimum conditions for disinfection such as solar light intensity, characteristic of sewage wastewater, amounts of $TiO_2$ and comparison of solar ligth/$TiO_2$ systems with UV light/$TiO_2$ system was examined. The results are as follows: (1) photocatalytic disinfection process with solar light in the presence of $TiO_2$ film more effectively killed total coliform (TC) than solar light or $TiO_2$ film absorption only. (2) The survival ratio of TC and residual ratio of organic material (BOD, CODcr) decreased with remain resistant material. (3) The survival ratio of TC and residual ratio of organic material (BOD, CODcr) decreased with the increase of amounts of $TiO_2$. (4) TC survival ratio decreased linearly with increasing UV light intensity. (5) The disinfection effect of solar light/$TiO_2$ slurry system decreased more than UV light/$TiO_2$ film systems. (6) The disinfection reaction followed first-order kinetics. We suggest that solar light instead of using artificial UV light was conducted to investigate the applicability of alternative energy source in the disinfection of TC and the degradation of organic material.

• 한국환경과학회지
• /
• 제23권5호
• /
• pp.943-962
• /
• 2014

Industrial gas drying, dilute gas mixtures purification, air fractionation, hydrogen production from steam reformers and petroleum refinery off-gases, etc are conducted by using adsorptive separation technology. The pressure swing adsorption (PSA) has certain advantages over the other methods, such as absorption and membrane, that are a low energy requirement and cost-effectiveness. A key component of PSA systems is adsorbents that should be highly selective to a gas being separated from its mixture streams and have isotherms suitable for the operation principle. The six standard types of isotherms have been examined in this review, and among them the best behavior in the adsorption of $CO_2$ as a function of pressure was proposed in aspects of maximizing a working capacity upon excursion between adsorption and desorption cycles. Zeolites and molecular sieves are historically typical adsorbents for such PSA applications in gas and related industries, and their physicochemical features, e.g., framework, channel structure, pore size, Si-to-Al ratio (SAR), and specific surface area, are strongly associated with the extent of $CO_2$ adsorption at given conditions and those points have been extensively described with literature data. A great body of data of $CO_2$ adsorption on the nanoporous zeolitic materials have been collected according to pressure ranges adsorbed, and these isotherms have been discussed to get an insight into a better $CO_2$ adsorbent for PSA processes.

• 한국실내디자인학회논문집
• /
• 제15권5호
• /
• pp.120-129
• /
• 2006

Apartments have become the most popular type of residential building in Korea since the 1960s. The dwelling space should be designed to accomodate various life styles or changing needs of family members. This research is conducted to analyze flexible interior space types of apartments and to improve the architectural planning and design of apartments that can satisfy various needs of residents. In this study, apartments of 10 - 90 pyeongs built in the region of Seoul, between 1998 and 2007, are investigated in terms of the unit plan, the number of open sides, and a distribution of flexible apartment types for each year, Apartments with flexible space are classified into 10 different types, including a flexible type between bedrooms, a flexible type between a bedroom and the livingroom, and a flexible type between the dinning room and the livingroom. According to the composition of unit plans, apartments are also differentiated as a single-corridor type, a double-corridor type, a stairway type, a hall type, and a combination type. According to these classifications, the characteristics of desirable unit plans were analyzed. The results of the analysis showed that, as the unit size of apartments get bigger, the ratio of width/depth of the front side unit plan is increased. This result reflects a trend of high-rise apartments which have an increased number of front-side bays and a shorter depth for better penetration of daylight. In addition, a hall type is found to have a wider front side and shorter depth. According to open sides, a flexible type of the livingroom and the dinning room/kitchen (L-D.K) is found to be most common for the front/back open space, and the livingroom is usually placed on the front/side open space. To meet the changing needs of residents, more research should be conducted on flexible dwelling space.

• 대기
• /
• 제27권3호
• /
• pp.331-344
• /
• 2017

Solar energy is calculated using high-resolution digital elevation model (DEM). In focus on Seoul metropolitan area, correction coefficients of direct and diffuse solar energy with the topographic effect are calculated from DEM with 1720, 900, 450, 90 and 30 spatial resolutions ($m{\times}m$), respectively. The solar energy on the real surface with high-resolution is corrected using by the correction coefficients with topographic effect from the solar energy on horizontal surface with lower resolution. Consequently, the solar energy on the real surface is more detailed distribution than those of horizontal surface. In particular, the topographic effect in the winter is larger than summer because of larger solar zenith angle in winter. In Seoul metropolitan area, the monthly mean topographic effects are more than 200% in winter and within 40% in summer. And annual topographic effects are negative role with more than -60% and positive role with below 40%, respectively. As a result, topographic effect on real surface is not a negligible factor when calculating and analyzing solar energy using regional and global models.

• 대기
• /
• 제27권4호
• /
• pp.385-398
• /
• 2017

Numerical weather prediction experiments were carried out by applying topographic effects to reduce or enhance the solar radiation by terrain. In this study, x and ${\kappa}({\phi}_o,\;{\theta}_o)$ are precalculated for topographic effect on high resolution numerical weather prediction (NWP) with 1 km spatial resolution, and meteorological variables are analyzed through the numerical experiments. For the numerical simulations, cases were selected in winter (CASE 1) and summer (CASE 2). In the CASE 2, topographic effect was observed on the southward surface to enhance the solar energy reaching the surface, and enhance surface temperature and temperature at 2 m. Especially, the surface temperature is changed sensitively due to the change of the solar energy on the surface, but the change of the precipitation is difficult to match of topographic effect. As a result of the verification using Korea Meteorological Administration (KMA) Automated Weather System (AWS) data on Seoul metropolitan area, the topographic effect is very weak in the winter case. In the CASE 1, the improvement of accuracy was numerically confirmed by decreasing the bias and RMSE (Root mean square error) of temperature at 2 m, wind speed at 10 m and relative humidity. However, the accuracy of rainfall prediction (Threat score (TS), BIAS, equitable threat score (ETS)) with topographic effect is decreased compared to without topographic effect. It is analyzed that the topographic effect improves the solar radiation on surface and affect the enhancements of surface temperature, 2 meter temperature, wind speed, and PBL height.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.414-414
• /
• 2013

InGaAlAs/InP은 $1.3{\sim}1.55{\mu}m$ 레이저 다이오드 응용을 위한 InGaAsP/InP를 대체하기 위한 물질로 많은 관심을 받아왔다. 디지털 합금 InGaAlAs 다중양자우물(multiple quantum wells: MQWs) 시료는 MBE (molecular beam epitaxy) 장비를 이용하여 n-InP 기판 위에 성장하였다. 양자우물과 장벽은 각각 (InGaAs)0.8(InAlAs)0.2와 (InGaAs)0.4(InAlAs)0.6 SPSs (short-period superlattices)로 $510^{\circ}C$에서 성장하였다. 발광특성을 향상시키기 위하여 질소분위기에서 $700^{\circ}C$ $750^{\circ}C$ 또는 $800^{\circ}C$에서 30초간 열처리(rapid thermal annealing: RTA)하였다. RTA 온도에 따른 디지털 합금 InGaAlAs MQWs의 발광특성을 분석하기 위해 PL (photoluminescence)과 TRPL(time-resolved PL)을 이용하였다. RTA 온도에 따른 InGaAlAs MQWs 시료의 발광 메카니즘 및 운반자 동력학을 연구하기 위하여 발광파장 및 온도에 따른 TRPL을 측정하였다. 저온(10 K)에서 PL 피크는 RTA 온도를 $700^{\circ}C$에서 $750^{\circ}C$로 증가하였을 때 1,242 nm에서 1,245 nm로 장파장 영역으로 이동하였다가 $800^{\circ}C$에서 열처리하였을 때 단파장 영역으로 이동하여 1,239 nm에서 나타났다. 또한 PL 세기는 RTA 온도를 증가함에 따라 증가함을 보이다가 RTA 온도를 $800^{\circ}C$로 증가하였을 때 PL 세기는 감소하였다. 발광소자 개발을 위한 InAlGaAs MQWs 시료의 최적의 열처리 조건을 이러한 PL과 TRPL 결과로부터 결정할 수 있다.

• 한국해안해양공학회지
• /
• 제16권2호
• /
• pp.83-91
• /
• 2004

수면 위에 고정된 수평막에 의한 파랑제어성능을 선형포텐셜이론을 사용하여 해석하였다. 고유함수 전개법을 적용하기 위하여 유체영역을 수평막이 없는 영역과 있는 영역으로 나누고 두 영역이 만나는 경계면에서 각 영역의 해를 정합 시켜 완전한 해를 구하였다. 본 해석방법은 Cho and Kim(1998)과 같이 경계치문제를 회절과 방사문제로 나누어 풀지 않고 산란문제를 직접 풀어 동일한 해를 구하는 해석방법이다. 개발된 해석모델을 검증하기 위하여 2차원 조파수조(36m${\times}$0.91m${\times}$1.22m)에서 모형실험을 수행하였다. 해석결과와 모형실험결과는 정성적으로 잘 일치하고 있음을 확인하였다. 수평막의 길이와 초기장력 그리고 입사파의 주파수를 바꿔가면서 반사율과 투과율을 살펴보았다.

• 한국환경농학회지
• /
• 제17권4호
• /
• pp.306-311
• /
• 1998

Effects of soluble silicon and surfactants on the development of powdery mildew of cucumber were tested for environmentally safe powdery mildew control. Tested soluble silicon was potassium silicate$(K_2SiO_3)$ and tested commercial surfactants were Jeonchakje, Silhouette, Kaba, and Tween 20. Tested concentrations were 2, 4, 8, 16mM for the soluble silicon, 0.5 and 1.0% for Tween 20, 0.05 and 0.1% for both Jeonchakje and Kaba, and 0.03 and 0.07% for Silhouette. Water dilutions of tested materials were sprayed on cucumber (Cucumis sativus) leaves once a week for 4 weeks. From 3 days after the second spray, the diseased area and the numbers of fungal colony were measured from the treated leaves for 6 times at 3-4 days interval. Powdery mildew was less severe on treated cucumber compared to distilled water-treated cucumber (check). In all treatments, diseased area index was proportional to the number of the fungal colony. At the end of investigation, there was severe powdery mildew on check cucumbers. Average 30% of a leaf was colonized by powdery mildew fungus and the average number of the fungal colony per leaf reached to more than 70. On the other hand, none of the treated cucumber suffered severe powdery mildew. The treatments including 8 and 16mM of soluble silicon, doubled concentration of Kaba, and 0.5 and 1.0% of Tween 20 showed more than 80% of control effect compared to water-treated cucumber. In addition, no phytotoxicity was found. Potassium silicate and Tween 20 showed the possibility to replace chemical pesticides for the control of powdery mildew.

• 한국해양환경ㆍ에너지학회지
• /
• 제2권1호
• /
• pp.40-48
• /
• 1999

해양공학과 관련된 모형실험을 위하여 많이 사용되고 있는 조파수조(2차원수조, 장수조, 사각수조)에 소파장치는 필수적인 장치이다. 본 논문에서는 새로운 개념의 소파장치의 소파성능을 실험을 통하여 살펴보았다. 새로 고안된 소파장치는 소파성능이 우수하고 가볍기 때문에 설치가 용이하다. 또한 넓은 설치공간이 필요치 않아 수조공간 활용에 있어 효과적이며 조파기로부터 발생된 파장에 큰 영향을 받지 않기 때문에 아주 큰 장파만 피한다면 거의 완벽하게 파를 소멸시킬 수 있는 장점을 가지고 있다. 본 소파장치는 일정한 크기의 구멍이 균일하게 배열된 타공판을 입사파의 진행방향과 수평으로 수면밑에 잠기게 설치한 형태로 파가 수평형 타공판을 통과하면서 타공판의 구멍을 통하여 강한 제트 흐름이 형성되면서 파 에너지가 소멸되는 특징을 가지고 있다. 모형실험 결과 수평형 타공판의 소파성능은 타공판의 잠긴 깊이와 판의 전체면적과 뚫린 부분의 면적의 비로 표현되는 공극율에 밀접한 관련이 있으며, 각각의 값은 최대 소파성능을 발휘하는 최적의 값을 가지고 있음을 규명하였다. 수평형 타공판의 앞쪽을 뒤쪽보다 약간 기울게 설치하는 방법도 특정한 주파수 범위내에서는 수평형에 비하여 우수한 소파성능을 보이며, 이때 타공판의 경사각도도 소파장치 성능을 결정하는데 중요한 변수임을 밝혔다.