• Title/Summary/Keyword: 조성 후처리

Search Result 1,006, Processing Time 0.046 seconds

$CO_2$ 분리용 Polyetherimide Hollow Fiber Membrane의 제조 및 투과특성

  • 박유인;이규호
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 1993.04a
    • /
    • pp.36-37
    • /
    • 1993
  • 상전이 공정에 의해 제조된 기체분리용 중공사막은 1차적으로 방사원액의 조성과 내.외부응고제의 조성, 중공사 방사조건 그리고 후처리 과정에 의해서 전체적인 구조가 결정되어진다. 특히 기체 분리에 이용되는 Nonprous Membrane의 경우 Dense Skin의 Thickness와 Pinhole의 유무에 따라 투과성과 선택성에 커다란 영향을 미친다. 따라서 최근에는 Dense Skin의 초박막화와 Pinhole이 없는 비대칭막 제조등 폭넓은 연구가 이루어지고 있다. 본 연구에서는 CO$_2$ Gas 분리용 Polyetherimide 중공사막을 제조하여, 중공사막 제조조건과 후처리 조건에 따른 $CO_2/N_2$ Gas의 분리계수를 측정하였다.

  • PDF

Postprocessing for Tonality and Repeatability, and Average Neural Networks for Training Multiple Songs in Automatic Composition (자동작곡에서 조성과 반복구성을 위한 후처리 방법 및 다수 곡 학습을 위한 평균 신경망 방법)

  • Kim, Kyunghwan;Jung, Sung Hoon
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.26 no.6
    • /
    • pp.445-451
    • /
    • 2016
  • This paper introduces a postprocessing method, an iteration method for melody, and an average neural network method for learning a large number of songs in order to improve musically insufficient parts in automatic composition using existing artificial neural network. The melody of songs composed by artificial neural networks is produced according to the melodies of trained songs, so it can not be a specific tonality and it is difficult to have a repetitive composition. In order to solve these problems, we propose a postprocessing method that converts the melody composed by artificial neural networks into a melody having a specific tonality according to music theory and an iteration method for melody by iteratively composing measure divisions of artificial neural networks. In addition, the existing training method of many songs has some disadvantages. To solve this problem, we adopt an average neural network that is made by averaging the weights of artificial neural networks trained each song. From some experiments, it was confirmed that the proposed method solves the existing problems.

Analysis of Efficiencies in pro environmental constructed Wetlands for Treating sewage treatment effluent (친환경 인공습지 조성을 통한 하수처리 방류수 재처리 효과분석)

  • Lim, Gun Muk;Park, So Mi;Ha, Eun Jung;Lee, Jong Jin
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.220-220
    • /
    • 2020
  • 영산강수계는 상류에 4개의 농업용 댐이 위치하여 환경대응용수 확보 및 하천유지유량이 절대적으로 부족하고, 갈수기 하천 유량의 약 67 %가 광주 제 1, 2 하수처리장 방류수가 차지하고 있어 하천의 수질과 수생태계를 위협하고 있다. 이에 최근에는 오염된 하천의 건강성을 회복하기 위한 방법으로 수생태계의 정화능력을 활용한 인공습지가 각광받고 있다. 영산강 유역에서도 자연의 정화능력을 활용하여 하천 오염원을 저감시키기 위한 사업의 일환으로 2016년 광주 제 2 하수처리장 방류구에 서창오미공원 습지를 조성하였다. 이 습지는 유입량이 적어 정상적 기능이 어려운 기존 습지를 재조성한 것으로 하수처리장 방류수 약 5만 ㎥/day을 습지로 유입시켜 수질정화용 식재식물을 이용하여 하수처리장 방류수 수질을 개선한 사업이다. 2016~2017년 모니터링 결과, 습지 유입 전·후 BOD는 평균 33.5 %, 최대 73.1 % 저감 되었으며, T-P 또한 평균 59.3 %, 최대 91.6 % 저감 되었다. 그러나 습지는 운영기간 경과 시 퇴적물 축적, 고사체로 인한 T-P 용출 등으로 인하여 처리수의 수질이 더 악화될 우려가 있기 때문에 습지 조성 후 지속적인 유지관리와 모니터링이 필요하다. 그 예로 하수처리장 방류수와 비점오염원 처리를 위해 주암호에 조성된 인공습지의 경우, 2001년 준공 후 지속적인 관리 및 모니터링을 통하여 약 17년이 지난 2018년에도 BOD 49.3 % T-N 65.1 %, T-P 19.2 % 로 저감되어 오염원 및 영양염류 제거에 큰 효과가 있는 것으로 나타났다. 따라서 본 조사에서는 서창오미공원과 주암호 인공습지 운영 결과를 토대로 습지 모니터링의 중요성과 적정 운영 방안을 제시하고자 하며, 영산강 하천의 점·비점오염원 저감을 위한 신규 인공습지 조성 사업에 기초자료로 활용하고자 한다.

  • PDF

Effects of Sodding and Seeding Time and Rate of Seed Mixture on the Establishment of Cool-Season Turfgrasses (한지형 잔디의 조성시기, 초종 혼합 비율이 잔디 피복에 미치는 영향)

  • Shim Gyu Yul;Kim Chang Soo;Lee Seong Ho;Joo Young Kyoo
    • Asian Journal of Turfgrass Science
    • /
    • v.18 no.4
    • /
    • pp.179-191
    • /
    • 2004
  • This study was conducted to find out the effect of sodding and seeding time and rate of seed mixtures on the establishment of cool-season turfgrasses by evaluating the turf coverage rates for two years. In fall planting, the required establishment period of full coverage($100\%$) was 1.5 months with a rolled turf sodding(Kentucky bluegrass $100\%$, Kentucky bluegrass $80\%$+perennial ryegrass $20\%$). The $100\%$ turf establishment was achieved in 7 months with Perennial ryegrass $100\%$, and 7.5 months by seeding with Kentucky bluegrass $100\%$(KB 100), Kentucky bluegrass $80\%$+perennial ryegrass $20\%$(KB80+PR20), Kentucky bluegrass $70\%$+perennial ryegrass $30\%$(KB70+PR30). In spring planting, the establishment periods far sod with KB 100 or KB80+PR20 were taken one month. However, in the case of seeding, the establishment periods were 3 months, 3.5 months, 3.5 months and 4 months with PR100, KB80+PR20, KB70+PR30, and KB 100, respectively Comparing the turf establishment vigor between fall and spring planting, the vigor was higher In spring planting than in fall planting in both sodding and . seeding. In the case of spring planting, the most proper time for turf establishment was tested on April, May, and June trials. The effect was significant in establishment vigor. The result showed highest on April planting. On May and June trials, establishment vigors were decreased gradually As the mixture rate of PR increased, ryegrass, establishment vigor was decreased with the rates. These results indicated that perennial ryegrass has relatively less tolerant to summer heat than Kentucky bluegrass. Number of shoots in 95 days after seeding was higher in KB100 by 16,600 per $m^2$ than in PR100 by 12,400 per $m^2$, while the lowest number showed in KB50+PR50 by 3,300 per $m^2$. Those in KB80:PR20, KB70:PR30 were 6,700 and 4,900 per $m^2$, respectively. The ratios of tillers according to mixture rates between Kentucky bluegrass and perennial ryegrass were KB80:PR20=87:13, KB70:PR30=78:22, and KB50:PR50=48:52. According to results in this study, Ideal seeding time might be spring (April) than in fall (September), and proper mixture rate was $80\%$ of Kentucky bluegrass with $20\%$ of perennial ryegrass.

Effects of Ar gas composition on the surface properties of AISI316L stainless steel during low temperature plasma nitriding after low temperature plasma carburizing (AISI316L stainless steel에 저온 프라즈마 침탄처리 후 질화처리 시 Ar 가스조성이 표면특성에 미치는 영향)

  • Jeong, Gwang-Ho;Lee, In-Seop
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2007.11a
    • /
    • pp.159-160
    • /
    • 2007
  • 저온 플라즈마 침탄 처리 후 연속적인 공정으로 저온 플라즈마 질화를 실시하여 내식성과 표면경도를 향상시키는 처리에서 질화처리 시 Ar 가스가 표면특성에 미치는 영향을 조사 하였다. 모든 시편의 경도가 미처리재 보다 약4배 증가하였으며, Ar가스의 양이 증가할수록 N의 침투깊이가 깊어졌다. 전체 경화증의 두께는 거의 일정하였고, 경화층은 모재보다 내식성이 증가되어 단면조직사진에서 밝게 나타났다.

  • PDF

Characterization of OCC pulp after fractionation and mechanical treatment (분급 및 기계적 처리에 의한 OCC 펄프의 특성)

  • 이학래;강태영;서만석;허용대;류정용
    • Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
    • /
    • 2002.05a
    • /
    • pp.17-17
    • /
    • 2002
  • 국내 제지 산업에서 큰 비중을 차지하고 있는 골판지 원지는 주로 국내에서 발생되는고지를 원료로 생산되고있다. 2001년 제지 통계에 따르면 우리나라의 고지재활용율은 세계 최고 수준으로 지류 재활용 비율이 약 72%에 달하며 그중 국산 폐지사용량은 해마다 꾸준히 증가하여 2001년 62%에 이르렀다. 하지만 고지의 재활용율이 증가함에 따라 많은 기술적, 품질적 문제가야기되어 강도저하, 공정 및 품질 저하가 날로 심각해지고있는 것이 현실이다. 본 연구에서는 국내 골판지 원지의 해섬특성을 알아보고 조성이 상이한 원료 물질의 해섬특성 곡선을 조사한 후 골판지 원지의 원료로 가장 널리 사용되고 있는 KOCC의 물성개선 가능성을모색하기 위해 분급 및 기계적 처리를 적용하고 도입 효과를 살펴보았다. 다양한 조성으로 구성된 OCC 고지의 해리에 따른 해섬 현상을 살펴보기 위해 각각의 원지와 조성이 상이한 원료물질의 해섬 특성 곡선을 조사하였다. 저농도 해리기를 이용하여 농도와 revolution의 변수를 주어 해리를 실시하고 스크린을 이용하며 미해리분을 측정하여 해섬 특성 곡선을 평가하였다. 또한 가장 널리 사용되고 있는 원료인 KOCC의 분급에 의한 물성 개선 가능성을 모색하기 위해 실험실적인 모텔링에 의한 분급과 기계적인 처리를 실시하여 물성을 평가하였다. 모델링은 UKP와 KOCC 100%인 골판지 원지를 이용하였으며 압축강도, 인장강도, 파열강도를 측정하였다. 현장에서의 적용가능성을 살펴보기 위해 현장에서의 Multi fractor를 이용하여 분급된 지료를 채취하여 물리적인 처리를 가한 후 수초하여 물성을 평가하였다. 그 결과 분급 및 기계적인 처리에 의한 펄프의 특성은 단섬유의 재활용에 대한 고려가 있을 경우 물성개선을 위한 해결방법으로 활용될 수 있다고 판단되었다.

  • PDF

Combustion Characteristics of Fire Retardants Treated Wood (I) (난연처리 목재의 연소특성 분석(I))

  • Son, Dong Won;Kang, Mee Ran
    • Journal of the Korean Wood Science and Technology
    • /
    • v.43 no.1
    • /
    • pp.96-103
    • /
    • 2015
  • The aim of this paper is to analyze combustion characteristics of treated woods by fire retardants which are prepared by several borate and phosphate compound solutions. The combustion characteristics for flame retardant treated wood were carried out using thermogravimetric analysis (TGA) to measure their combustion heat and flame retardant test using cone-calorimeter. The result of TGA and flame retardant test showed that single chemical solution affected the char forming and flame delay. The mixed retardants solutions was believed to be related to the efficacy and property of single chemical. The retention value and concentration of the retardants also affected the performance of fire retardant treated woods. The fire retardants FR1 and FR2 satisfied the requirement of The 3 Grade of Korean building codes.

Study on SF6/O2 Plasmas for Copper Surface Characteristics (SF6/O2 플라즈마를 이용한 구리 표면 처리 후 표면 Corrosion 특성 연구)

  • Im, No-Min;Lee, Jun-Myeong;Lee, Jae-Min;Lee, Byeong-Jun;Gwon, Gwang-Ho
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2015.11a
    • /
    • pp.333-333
    • /
    • 2015
  • 본 연구에서는 디스플레이 패널 식각에 있어서 전극인 구리 박막 표면에 $SF_6/O_2$ 플라즈마 사용 시 발생되는 Corrosion 현상을 분석하기 위해 $SF_6/O_2$ 가스의 조성비를 변화하며 실험을 진행하였다. 유도결합 $SF_6/O_2$ 플라즈마를 이중 랭뮤어 탐침과 광 분광법을 이용한 플라즈마 진단을 통해 $SF_6/O_2$의 조성비의 변화에 따른 플라즈마 상태를 분석하고, $SF_6/O_2$ 플라즈마 조성비를 변화시켜 구리 박막의 표면을 처리한 후 발생되는 Corrosion과 Corrosion이 구리에 미치는 영향을 조사하기 위해 XPS, SEM, 4 point probe 등을 이용하였다.

  • PDF