• Title/Summary/Keyword: 조성시험

Search Result 1,894, Processing Time 0.029 seconds

The establishment of the statistics modeling for the effective utilization of the clinical trials information (임상시험정보의 효율적인 활용을 위한 통계모델링 구축)

  • Kim, Dong-seon;Cho, Sung-Je
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2010.11a
    • /
    • pp.161-164
    • /
    • 2010
  • 식품의약품안전청은 산발적으로 흩어져 있던 임상시험 관련 정보를 통합하여 서비스하기 위한 방안으로 임상시험정보방을 개설하게 되었다. 임상시험승인현황 등 원시자료는 종이형태로 생산, 관리된다. 이를 통계자료로 활용하기 위해서 식품의약품안전청의 관련 시스템인 KiFDA 시스템에 입력을 하게 된다. 이 시스템에 입력된 데이터는 실시간으로 임상시험관련 웹서비스 시스템에 구축된다. 이때에 실시간 통계정보의 정확성이 무엇보다 중요하다. KiFDA 시스템의 데이터베이스의 실시기관명과 임상시험계획승인제도(IND) 승인리스트 원본의 실시기관명이 틀린 것도 있었다. 이는 동일한 실시기관도 화면에서는 서로 다른 실시기관으로 보일 수 있다는 것을 의미한다. 결국 통계자료가 부정확하게 표출되는 데는 이런 원인들이 있었던 것이다. 본 논문에서는 기존의 문제점을 개선하기위해 임상시험정보방의 효율적인 통계모델링을 설계하여 물리적 데이터베이스를 구축하였다.

Solderability Evaluation of Sn-0.3Ag-0.7Cu Solder Alloy with Different Flux Activity and In Addition (플럭스 활성도 및 In 첨가에 따른 Sn-0.3Ag-0.7Cu 조성 솔더의 solderability 변화)

  • Yu, A-Mi;Lee, Chang-U;Kim, Jeong-Han;Kim, Mok-Sun;Lee, Jong-Hyeon
    • Proceedings of the KWS Conference
    • /
    • 2007.11a
    • /
    • pp.211-214
    • /
    • 2007
  • Sn-0.3Ag-0.7Cu 조성의 젖음 특성과 반응 특성을 Sn-1.0Ag-0.5Cu 및 Sn-3.0Ag-0.5Cu 합금의 결과와 비교, 분석하였다. 또한 Sn-0.3Ag-0.7Cu 조성의 용융 및 응고 특성을 DSC로 측정하고, 인장시험을 통한 stress-strain curve를 관찰하였다. 아울러 할로겐 함유량이 많은 플럭스를 사용하여 Sn-0.3Ag-0.7Cu 조성의 젖음 특성을 향상 시킬 수 있는지를 조사하였으며, Sn-0.3Ag-0.7Cu 조성에 미량의 In을 첨가하여 젖음 특성의 개선 정도를 분석하였다. 그 결과 할로겐 함유량이 높은 플럭스를 사용한 경우보다 미량의 In을 첨가한 경우에서 wettability의 향상을 보다 효과적으로 유도할 수 있음을 관찰할 수 있었다.

  • PDF

EPMA Analysis of Inter-reaction Layer in Irradiated U3Si-Al Fuels (EPMA를 이용한 U3Si/Al 조사 핵연료의 반응층 분석)

  • Jung, Yang-Hong;Yoo, Byung-Ok;Kim, Hee-Moon;Park, Jong-Man;Kim, Myung-Han
    • Analytical Science and Technology
    • /
    • v.17 no.4
    • /
    • pp.355-362
    • /
    • 2004
  • Fission products and Inter reaction layer of $U_3Si-Al$ dispersion fuel, irradiated in HANARO research reactor with 121 kW/m of maximum liner power and 63 at% of average burn-up, was characterization by EPMA (Electron Probe Micro Analyzer). The fuel punching system developed by Irradiated Materials Examination Facility (IMEF) has used to make these samples for the EPMA. With this system a very small and thin specimen which is 1.57 mm in diameter and 2 mm in thickness respectively has been fabricated to protect the EPMA operator from high radioactive fuel and to mini-mize the equivalent dose rate less than 150 mSv/h. EPMA was performed to observe layers of sectional, Inter-reaction and oxide with specimens of cutting and polished. Stoichiometry in the Inter-reaction layer with $16{\mu}m$ of thickness was $U_{2.84}$ Si $Al_{14}$ with calibration of $UO_2$ and $U_{3.24}$ Si $Al_{14.1}$ with calibration of standard specimen. metallic precipitates in this layer were not observed using fission products examination.

Effects of Feeding Mugwort Powder on Meat Composition and Sensory Characteristics in Gilt (인진쑥 첨가 비육돈의 식육 성분 조성 및 관능적 특성에 미치는 영향)

  • Kim, Il-Suk;Jin, Sang-Keun;Kang, Suk-Nam
    • Food Science of Animal Resources
    • /
    • v.29 no.1
    • /
    • pp.68-74
    • /
    • 2009
  • This study was conducted to determine the effects of mugwort powder on meat compositions (proximate analysis, meat cholesterol, fatty and amino acid composition) and sensory characteristics in finishing pigs ($LY{\times}D$). Each $20{\times}3$ pigs (75 kg) were randomly allotted to three treatments. Mugwort powder was added for 0 (C), 0.5 (T1), 1.0 (T2), or 1.5% (T3) in basal diet, respectively for 50 days. Moisture, protein, ash, and cholesterol were not significantly different between the samples, however, the compositions of fat in T2 and T3 were significantly lower than the control (p<0.05). The amino acid composition did not differ significantly in the samples. The total sum of saturated fatty acid (SFA) and unsaturated fatty acid (UFA) did not differ significantly in the samples. The compositions of linoleic acid, linolenic acid, essential fatty acid (EFA) and polyunsaturated fatty acid (PUFA) were lowest significantly in T3, however, monounsaturated fatty acid (MUFA) were highest in T3 (p<0.05). The fatty acid compositions of arachidonic acid, EFA and PUFA were highest significantly in T2 (p<0.05). There were no significant differences in the sensory characteristics of fresh and cooked meats in the samples.

Effect of Shading Condition to Fatty Acid Composition of Seeds in Safflower (잇꽃 종자의 지방산 조성에 대한 차광조건의 영향)

  • Jung-Seob Moon;Gue-Saeng Yeom;Song-Hee, Ahn;Se-Hyun Ki;Dong-Chun Jung
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2020.08a
    • /
    • pp.65-65
    • /
    • 2020
  • 우리나라의 잇꽃 재배는 2010년 39ha 수준이 재배되다가 2014년에는 76ha 까지 확대되었으나 점차 감소하는 추세를 보이고 있으며 2018년에는 55ha가 재배되고 있는 것으로 보고되었고 주산지는 전라남도와 경상북도로 알려져 있다. 잇꽃(Carthamus tinctorius L.)은 국화과에 속하는 두해살이 초본 식물로 한자명은 홍화(紅花), 영명으로는 Safflower를 사용하고 있다. 우리나라에서 잇꽃 이용은 잇꽃 종실을 위주로 이용되고 있으나 일본의 경우 잇꽃의 경관적 가치를 활용하여 산형현(山形縣)에서는 홍화축제가 매년 개최되고 있으며, 미국 등에서는 잇꽃의 저온 압착유가 기능성 건강식품류로 판매되고 있다. 본 연구는 차광 조건에 따른 잇꽃의 개화특성 및 종자의 지방산 조성을 조사하여 일조시수가 짧은 준고랭지에서 잇꽃의 적응성을 평가하기 위해 수행되었다. 차광조건별로 개화기의 엽면적을 조사한 결과 30% 차광조건에서 9041.0mm2로 무차광에 비해 높아지는 양상을 보였고 50% 이상의 차광에서는 유의하게 낮아지는 경향을 나타냈다. 식물체의 초장은 50% 차광에서 낮아지는 양상이었으며, 주경의 착엽수는 30%와 70% 차광조건에서 18.3매/주 이상으로 증가되는 경향을 보였다. 화서별 착화수에서는 1차 화경 및 2차 화경 모두에서 30% 차광조건에서 착화수가 높은 경향을 나타냈으며 70% 차광조건에서는 2차화경 착화수가 유의하게 낮아지는 경향을 보였다. 차광 조건별로 잇꽃의 개화단계를 비교한 결과 동일한 조사시기에 무차광에서는 개화 3단계의 만개기까지 도달한 비율이 51.6%로 높았으나 50% 이상 차광에서는 11.1%로 낮아 개화가 지연되는 결과를 보였다. 차광조건에 따른 종자의 100립중은 무차광에서 4.9g의로 유의하게 높았으며 차광 비율이 높아질수록 낮아지는 양상이었고 단윔녀적당 종자 수량에서도 무차광이 201.1kg/10a를 보인 반면70% 차광에서는 86.6kg/10a의 낮은 수량을 보였다. 잇꽃 종자의지방산 조성에서 조지방 함량은 18.1~18.6% 범위로 차광조건에 따른 유의한 차이는 없었으며 palmitic acid의 함량은 무차광에서 5.35%로 높았으나, oleic acid의 함량은 30% 차광조건에서 10.2%로 무차광에 비해 높아지는 양상을 나타냈으며 linoleic acid는 50% 차광조건에서 83.6%로 가장 높은 비율을 보였다.

  • PDF

Cavitation Erosion Behavior in Seawater of Gray Cast Iron Treated by High Hardness Electroless Nickel Plating (고경도 무전해 니켈도금된 회주철의 해수 내 캐비테이션 침식 손상 거동)

  • Park, Il-Cho;Kim, Seong-Jong
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2017.05a
    • /
    • pp.119.2-119.2
    • /
    • 2017
  • 무전해 니켈도금은 전기 공급 없이 환원재의 화학반응에 의해 도금이 진행되며, 복잡한 형상의 제품에도 균일한 도금 층을 형성시킬 수 있어 널리 적용되는 기술이다. 특히, 전기 니켈도금 층에 비해 무전해 니켈도금 층의 내식성과 내마모성이 우수하여 산업현장에서 가장 많이 사용되고 있다. 그러나 해양환경에서 빠른 유속 변화에 의해 발생되는 캐비테이션-침식 방지를 위한 무전해 니켈도금의 적용은 전무한 실정이다. 따라서 본 연구에서는 회주철의 캐비테이션-침식 방지를 위해 최적의 무전해 니켈도금 조건을 규명하고, 그 캐비테이션 저항성을 평가하고자 하였다. 무전해 니켈코팅을 위한 모재는 gray cast iron (FC250)을 $19.5mm{\times}19.5mm{\times}5mm$의 크기로 제작하였다. 회주철의 인장강도는 $330N/mm^2$이며, 그 성분 조성(wt.%)은 3.23 C, 1.64 Si, 0.84 Mn, 0.016 P, 0.013 S 그리고 나머지는 Fe이다. 시험편은 SiC 페이퍼 grit #1200까지 연마하였으며, 시험편의 표면 거칠기(centre line average, Ra)는 $1.6-2.1{\mu}m$ 범위 내로 제작하였다. 연마된 시험편은 증류수(distilled water) 세척 후 hot air로 건조하였다. 무전해 도금 전 시험편은 탈지를 위해 아세톤 용액(room temperature, RT)에서 3분간 초음파 세척하고, $90^{\circ}C$의 알카리 수용액으로 5분간 세척하였다. 그리고 표면활성화를 위한 산세척(acid pickling)은 5% sulfuric acid 용액에서 30초 동안 실시하였다. 무전해 Ni-P(electroless nickel, EN) 도금 전과 모든 과정마다 증류수로 시험편을 철저하게 세척하였다. EN 도금을 위한 도금욕(the bath)은 기존 문헌 연구를 통해 조성성분, 도금조건 및 변수들(the parameters)의 적절한 범위를 결정하였다. 도금조로 500mL 비커를 사용하였으며, 모든 시험편은 2시간 동안 EN deposition을 실시하였다. 캐비테이션 실험 결과 EN 도금의 표면경도가 증가함에 따라 캐비테이션 저항성도 현저하게 향상되었다.

  • PDF

A Design and Implementation of Web-based Test System using Computer-adaptive Test Algorithm (컴퓨터 적응형 알고리즘을 이용한 웹기반 시험 시스템 설계 및 구축)

  • Cho, Sung Ho
    • The Journal of Korean Association of Computer Education
    • /
    • v.7 no.6
    • /
    • pp.69-76
    • /
    • 2004
  • E-learning is the application of e-business technology and services to teaching and learning. It use of new multimedia technologies and Internet to improved the quality of learning by facilitating access to remote resources and services. In this paper, we show a web-based test system, which is carefully designed and implemented based on the real TOEFL CBT. The system consists of a contents delivery mechanism, computer-adaptive test algorithm, and review engine. In this papepr, we describe design and implementing issues of web-based test systems.

  • PDF

저방사화 Cr-Mn-W-V계 스테인리스강의 미세 조직 특성 및 부식 저항성에 미치는 질소첨가와 시효 열처리의 영향

  • 장현영;박용수;김영식
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1995.05a
    • /
    • pp.784-789
    • /
    • 1995
  • 핵융합로 제1벽재로서 주목받고 있는 저방사화 Fe-Cr-Mn-W계 오스테나이트 스테인리스강에 소량의 V을 첨가하고 그 기본 조성에 시그마상의 생성억제와 합금의 고온강도 향상에 효과가 있는 질소함량을 변화시켜 전보에서 보고한 소둔열처리의 영향에 이어 미세 조직 특성 및 부식 저항성에 미치는 시효열처리의 영향을 살펴보았다. 부식저항성 평가를 위해서는 양극분극시험, 침지시험 수소취성 시험을 행하였으며, 석출상의 생성양상을 살펴보기 위해서는 광학현미경 관찰, 자성측정, EPR시험 및 경도시험을 행하였다. 시험결과, 질소의 함량이 증가할수록 시그마상의 석출이 억제되는 것을 알 수 있었으며, 시효시 실험합금의 부식저항성은 주로 $600^{\circ}C$부근에서 오스테나이트상의 입계에 석출하는 크롬탄화물과 50$0^{\circ}C$부터 비교적 넓은 온도 구간에 걸쳐 페라이트상으로부터 석출 변태되는 시그마상에 의해 지배되고 있음을 알 수 있었다.

  • PDF

Differences in Root Growth Characteristics of Creeping Bentgrass and Kentucky Bluegrass Sod (크리핑 벤트그래스와 켄터키 블루그래스 뗏장의 뿌리생육 특성 차이)

  • Woo, Jong-Goo;Lee, Dong-Ik;Lee, Song-Ho
    • Asian Journal of Turfgrass Science
    • /
    • v.21 no.1
    • /
    • pp.23-37
    • /
    • 2007
  • This study was carried out to investigate the characteristics of root growth in Kentucky bluegrass sod(KBS) and creeping bentgrass sod(BGS) transplanted in summer(August 9) and fall(September 19), respectively. Hydroponic system was also used to observe rooting development in the study. Root development differed in KBS by transplanting time. It reached to more than 5 cm after 100 days In summer and 50 days in fall. However, BGS's root grew over 6cm after 40 days, regardless of the season. There was no significant differences in BGS, regardless of any cutting treatment. In the case of KBS, it was best with sod culled with 0.5cm deep and 1.5cm long. But it grew beyond 5 cm in root growth under any treatment after 40 days in transplanting. In a hydroponic study, BGS produced root over 100cm for 80 days through a summer season. However, the root of KBS did only grow in condition below $20^{\circ}C$. These results indicated that root growth characteristics were variable in BGS and KBS. It was considered that rooting development of BGS might be improved with sufficient irrigation in summer, and KBS grows well in lower temperature of $10{\sim}18^{\circ}C$, as compared with BGS. As to establishing the lawn with a sodding method, it should be careful in transplanting time, especially KBS.

Deduction of Best Design Factor of Riparian Buffer Zone for Reduction of Non-Point Pollutants (비점오염 부하 저감을 위한 수변완충지대의 최적 인자 도출을 위한 연구)

  • Kim, Sung-Won;Choi, I-Song;Jung, Sang-Jun;Woo, Hyo-Seop;Oh, Jong-Min
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2007.05a
    • /
    • pp.1788-1792
    • /
    • 2007
  • 한강 "수변구역"에서 비점오염물질의 공공수역 유입을 억제하기 위한 다양한 방법들 중에서 보편적이고 자연친화적인 방법은 다양한 생물의 서식공간이며, 동시에 본류로 유입되는 과정에서 수질을 정화시키는 수질개선 공간인 수변완충구역, 또는 지대를 설정하여 관리하는 것이다. 그러나 이러한 수변완충지대 효과 분석 및 설정에 관한 연구는 국내에서 아직 수행되지 않았다. 본 연구의 목적은 수변구역의 자정능력을 높이는 것은 물론 그 밖의 하천 연안에서 비점오염물질의 차단과 처리능력을 증진시키고 수변 생태계의 서식처 보전 및 복원을 위해서 수변완충지대의 수질정화 기술개발과 생물다양성을 창출하는 수변완충지대 조성 기법을 개발하는데 있다. 본 연구에서는 기존 수변완충지의 추가적인 조성과 보완, 시험완충지 생태구조 및 기능 기초조사, 시험완충지 오염부하 저감효과의 실험 및 분석, 수변완충지대 설치 구상 등의 연구를 수행하여 수변완충지대 조성 시 설정 폭을 산정할 수 있게 하였다. 수행 지역은 한강수계 지역으로 남한강 수변인 경기도 양평군 병산리에서 실시하였으며, 잔디와 갈대, 갯버들, 혼합지역, 자연그대로의 상태(대조지역)의 5 구역으로 구분하였고, 거리별, 깊이별 샘플을 채취하여 유입수에 대한 오염물질 제거효율을 도출하고, 이를 이용하여 수변완충지대의 설계 시 필요한 유역의 폭, 면적, 길이 등과 같은 설계인자를 도출할 수 있도록 하였다.

  • PDF