• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.3
• /
• pp.135-140
• /
• 1988

This field experiment was carried out to determine the effects of cutting times (3,4 and 5 times $yr^{-1}$) and cutting heights (3, 6 and 9 cm) on the growth and dry matter(DM) yield of grasses grown under pine trees, and botanical composition of woodland pasture. The conditions of the experimental field was south direction with 30% of shade (ca. 70% of full sunlight). Annual DM yield was higher in the plots cut 4 times (6,097 kg) and 3 times (5,953 kg) than in 5 times (5,305 kg $ha^{-1}$). However, it ip considered that total nutrient yields may be not different among 3 treatments. The yield was significantly (P < 0.05) increased with higher cutting height, regardless of cutting time. The 9 cm of stubble height was very effective on both increasing DM production and seasonal distribution of DM. In botanical composition, 3 cm and 6 cm of cutting height accelerated the percentages of bareland and weeds, regardless of cutting time, particularly in summer season. However, 9 cm of stubble height maintained 80-85% of pasture grasses in all cutting times. In this experiment, therefore, cutting height was more important factor than annual cutting times for forage production and pasture longevity, and it is desirable to harvest 4-5 times per year (under this experimental field condition) with 9 cm of stubble height on woodland pasture.

• Journal of Korea Water Resources Association
• /
• v.38 no.11
• /
• pp.947-954
• /
• 2005

In this study, laboratory measurements are presented for run-up heights and overtopping of water waves on slopes of rubble-mound breakwaters armored with tetrapods. The effects of wave steepness, surf similarity and wave period on the run-up height and overtopping are investigated in detail. A measurements. A very reasonable agreement is observed. A slopes of breakwaters become milder, run-up heights become smaller. The overtopping rate also is considerably rate also is considerably affected by wave steepness and period.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2A
• /
• pp.391-399
• /
• 2006

Plate girders with variable depths have been often used at piers considering not only the economy but also an aesthetic aspect. Tapered plate girders exhibit more complicated behaviors than prismatic girders especially under shear. However, a comprehensive design method for the determination of the shear strength has yet to be developed mainly due to lack of study. In this study, investigated is the buckling and ultimate behaviors of tapered plate girders subjected to shear through finite element analyses. From the analysis results, a simple design formula is suggested for the evaluation of the shear strength of tapered plate girders.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.233-233
• /
• 2011

This study describes the characteristics of accretion and scour around artificial reefs in Korea. The survey for accretion and scour was made at a dice reef set consisting of 137 dice reefs. The volume of a dice reef unit is 8 $m^3$. The reef set was placed on the muddy sand at 21.6 m in November of 1999. Equipment used in the survey includes Side Scan Sonar, Multi Beam Echo Sounder, Sub-Bottom Profiler and water current meter. According to the results, the artificial reefs are heaped up at two to three times (4 m) the height of the dice reef. The maximum current around the artificial reefs was 81.5 cm/sec at the ebb tide and 72.7 cm/sec at the flood tide. Scour around artificial reefs occurs upstream to the flow while accretion is formed at wake zone in the downstream. The height of accretion ranges from 2.4 to 3.0 m. The crest of the accretion is formed at the distance of about 10 m from the edge of the reef. The slope of accretion is formed steeply at the vicinity of the reef which is at right angles to the direction of main current, and grows gently lower with the increased distance from the reef. Scour is continuously caused by upwelling from the reef set and by side currents that flow parallel to side of the accretion. Also, scour takes place on the deposited sediment rather than on the remaining bottom sediments. This means that, once fully formed, the depth of scour gully on both sides to the direction of main current hardly changes.

• Asian Journal of Turfgrass Science
• /
• v.24 no.1
• /
• pp.16-23
• /
• 2010

Mowing is an important practice in golf course management. Mowing interval and height can affect net photosynthesis of turfgrass and finally shoot density, tillering, rooting and regrowth of turfgrass. The objectives of this study were to investigate the regrowth rate of zoysiagrass shoot under different mowing height for determination of proper mowing frequency. Recommended mowing interval were calculated by a rule that no more than 33% of the above ground height be removed in a single mowing. Daily shoot growth of zoysiagrass at 10 mm mowing height were 2.1~4.7 mm (July), 1.9~2.9 mm (August), 0.9~1.5 mm (September), and 0.6 mm (October). These results indicate that recommended mowing interval were 1.1~2.3 day for July, 1.7~2.4 day for August, 3.5~5.4 day for September, and 8.5 day for October, respectively. Daily shoot growth of zoysiagrass at 15 to 17 mm mowing height were 4.0~5.3 mm (July), 2.9~4.5 mm (August), 1.4~3.7 mm (September), and 1.3 mm (October). These results indicate that recommended mowing interval were 1.4~1.9 day for July, 1.7~2.5 day for August, 2.3~6.3 day for September, and 6.8 day for October, respectively. Daily shoot growth of zoysiagrass at 18 to 21 mm mowing height were 3.5~4.7 mm (July), 2.9~4.9 mm (August), and 1.5~1.8 mm (September). These results indicate that recommended mowing interval were 1.9~2.6 day for July, 1.8~3.1 day for August, and 5.9~7.0 day for September, respectively. Daily shoot growth of zoysiagrass at 50 mm mowing height were 4.6~4.9 mm (July), 5.0~6.5 mm (August), and 2.5~4.7 mm (September). These results indicate that recommended mowing interval were 5.1~5.4 day for July, 3.9~5.0 day for August, and 5.3~9.8 day for September, respectively.

• Korean journal of applied entomology
• /
• v.20 no.2 s.47
• /
• pp.71-75
• /
• 1981

The percentage of lesion height vs. plant height was higher in Yushin than Jinheung within the same nitrogen level. The infection occurred at the same level of waterline and the symptoms developed with the same speed for two varieties, but the damage was greater in Yushin as the symptoms reached faster to the top due to the short length of the 1st and 2nd internodes from the top.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.09a
• /
• pp.10-17
• /
• 2010

우리나라는 육지와 바다에서 서로 다른 높이기준면을 사용하고 있으므로 국가공간정보의 활용도 제고를 위해서도 높이기준의 일원화를 필요로 하고 있다. 본 연구에서는 수직기준면에 대한 검토와 표준화 방향조사, 국제기구 활동연계를 통한 향후 발전방향을 제시하였다. 그 결과 외국의 경우처럼 지구타원체와 지오이드면의 차이를 데이터베이스하고 보정시스템을 구축할 필요가 있으며, 앞으로 S-100에 대처하기 위하여 해양데이터에 대한 SDI표준안 연구가 시급함을 보여주고 있다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.386-391
• /
• 1996

동경전력(주)가 도쿄만 근처에 건설한 높이-직경비가 비교적 큰 지진시험모델(TEPSCO모델)에 수행한 강제진동시험결과와 시험모델의 지진응답을 해석하고 분석하였다. 재료시험과 지반조사 결과를 이용하여 예측해석모델을 만들었고, 시험시에 계측된 측정치를 반영하여 예측해석모델을 수정하여 예측후상관해석모델을 작성하였다. 해석은 진동수영역과 시간영역에서 각각 이루어졌다. 연구결과로 TEPSCOT모델의 경우는 부지와 시험모델의 형상특성으로 인하여 지반의 재료감쇠비가 동적응답에 미치는 영향이 지배적이었음을 알 수 있었다.

• 한국IT서비스학회:학술대회논문집
• /
• 2008.11a
• /
• pp.411-414
• /
• 2008

해상사고로 인한 송전선로의 보호를 위해 Scan Laser Range Finder를 사용하여 해상에서의 일정한 높이에서 수평으로 레이저빔을 조사한 후 높이 기준을 넘는 선박을 검지하여 좌표와 속도를 측정하여 경보방송 및 무선 통신으로 회항을 유도하여 송전선을 감시 및 보호하는 기술개발로 산업 현장에서의 적응력을 높이는데 기여할수 있을것으로 보인다.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.606-611
• /
• 1999

To identify irradiated foods, studies have been carried out with electron spin resonance (ESR) spectroscopy on bone containing foods, such as chicken, pork, and beef. Bones cleaned, pieced and dried were irradiated with doses of 0, 1, 3, 5 kGys using a $Co^{60}$ irradiator. The bones were placed in a resonant quartz tube with an internal diameter of about 4.0 mm within the Bruker Win-ESR spectrometer, and the intensity of the ESR signal could be quantified by double integration of the first derivative spectrum. The irradiated bone presented an asymmetric absorption in shape, different from that of an unirradiated one. It could be possible to detect at doses lower than 1 kGy below the dose employed commercially (3 kGy) in the case of irradiated chicken bone. The signal intensity was greatest in the beef bone, intermediate in the pork bone and lowest in the chicken bone; it was normally lower for smaller animals than for larger species, and small variations were observed between samples of the same species. The intensity of the signal induced in bones increased linearly with irradiation doses in the range of 1.0 kGy to 5.0 kGy, and it was possible to distinguish between samples given low and high doses of irradiation. The signal stability for 6 weeks made them ideal for the quick and easy identification of irradiated meats.