• Product Safety
• /
• s.196
• /
• pp.70-77
• /
• 2010

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.390-397
• /
• 2012

According to sailing condition, an exciting force for luminairie of naval vessels was measured and analyzed. A naval combat service support boat and P${\bigcirc}{\bigcirc}$(patrol killer guided missile) were selected as a target naval vessel. Due to their small size and fast speed, they received excessive vibration than other bigger naval vessels like destroyer. The vibration of luminairie was measured on their cruising and maximum speed. This could analyze exciting force for luminairie of naval vessels. Using this analyzed data, the validity of military standard for naval vessel was verified.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.25-28
• /
• 2008

수은이 함유된 방전등과 같은 조명기구의 사용이 제한되는 특수구역의 산업용 조명설비로 200 W 이상의 높은 소비전력의 백열등기구들이 사용되고 있다. 인공광원으로 백열전구는 매우 낮은 발광효율로 전력소모가 많고, 높은 방사열로 인해 화재의 염려가 있어 램프보호유리구를 장착하므로 낮은 조명률로 광 손실이 높게 발생한다. 또한 산업지역 내에서는 일반적으로 각종 전동기 및 공기조화 설비의 가동으로 진동이 심하며 여기에 백열전구 사용 시 당초 예상되는 수명보다 더욱 단축되고 있다. 이러한 지역에 설치된 백열등을 조명등기구 효율(Luminaire Efficacy)이 높은 친환경 에너지 절감형 차세대 광원인 LED조명등으로 대체하여 산업설비 지역 내 공급되는 조명용 소비전력을 크게 줄여 에너지 절약효과를 높임과 동시에 양호한 조명율의 LED광원을 사용함으로써 조명환경 개선에 따른 작업능률을 높이기 위해 특수지역의 산업용 LED조명등을 개발하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.485-490
• /
• 2012

In this paper, driver circuit of LED lights for ships is designed and implemented to replace conventional lights with filament which have short life time due to vibration of ships. The driver of LED module is switching circuit without transformer to reduce volume and cost. As switch circuit controls input 220 VAC with PWM, LED module is reliably driven. Power factor is improved by using valley-fill PFC compensation circuit which is handled to pulse current of switching circuit. Serial-parallel LED circuit is applied to reduce change period of lights of long-term navigation ships. Array of serial-parallel can operate even if some of LEDs is damaged. It is suitable for ships that power consumption and power factor of lights including developed drive circuit have 39Watt and 0.925 respectively.

• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.211-219
• /
• 2011

The illumination has a meaning of making surroundings brighter. Also, the illumination is a piece of equipment designed to decorate interior space. But the cover materials and designs of the lamp are not variously, in comparison with those of advanced nations. Consequently, this research introduces new styles of the indirect ceramic lamp. The soil is used for making covers of lamps to differ from existing similar lamps. Also, designs of traditional Korean image are used in the part of the cover. The structural part of new illuminating system will be introduced as well. The ceramic lamp with high quality will help to develop a new interior product and it will suffice the demand class who prefers quality goods. With the ceramic covered lamps, the growth of ceramic industrial development will be expected.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.1
• /
• pp.68-75
• /
• 2003

본 논문에서는 파랑, 녹색, 호박색 빨강색, 백색 등 고휘도 5mm LED(light emitting diode)의 기본적인 분광분포(SED: spectral energy distribution) 특성을 분석하였으며, LED램프의 중요한 광학 특성인 광속, 효율 피크 파장$({\lambda}p)$, 가중치 평균 파장, 반치폭(FWHM, $\Delta\lambda$), 색도좌표, 주 파장, 자극순도(Pe)와 휘도순도(Pc) 등을 측정 및 실험하였다. 제시된 LED램프의 특성 데이터는 앞으로 LED램프를 사용한 새로운 조명등기구를 개발하는데 많은 도움을 줄 것이며, 이러한 측정 데이터들은 조명용 광원으로서 LED램프의 사용 대체 가능성을 나타낸다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.127-135
• /
• 2010

A study on that LED in 36[W] class replaces broadcast illuminator to save energy and improve the quality of film because tungsten halogen illuminators are too hot and spending lots of electrical capacity at the time of camera shooting. And the following result was obtained .36[w] LED lighting fixture's illuminance is lower than 1[kw] halogen Light but object's illuminance became higher, and at the image be showed very bright and softly.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.693-695
• /
• 2010

3~5W의 출력을 내는 MR16 LED 조명기구는 저 전력, 긴 수명으로 인해 에너지 문제를 해결하기 위한 중요한 요소로 작용한다. 반면에 정션 온도 상승으로 인해 수명이 급격히 단축하는 문제점이 발생하므로 방열 문제를 해결하는 것이 무엇보다 중요하다. 본 연구에서는 단일 고출력 LED 패키지를 이용한 MR16 조명등의 개발을 위해 1차원 열저항 해석 및 3차원 CFD 해석을 수행하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.145-148
• /
• 2009

It is sharply decreasing from several hundred[lx] to 1.0[lx] when it turn on the emergency lamps. The sharply decreasing illuminance makes peoples to have dark adaptation for long time. And they were with fear and confused. It also causes secondary accidents by people who take a mistake. This paper studied the combination style emergency lighting fixture to improve a problem of dark adaptations. But it was made an assumption that same conditions of battery capacity and a number of emergency lamps.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.541-545
• /
• 2009

This study evaluated the contact resistance, insulation resistance, withstand voltage characteristics and insertion force, etc., of the wire connector used inside an integrated LITE WAY lighting fixture developed for efficient installation. Since the connector connecting the lighting fixture's internal wires is housed, it is easily connected and separated and has a structure enabling a close-fitting connection. The temperature and time applied to the high temperature characteristics test of the connector are $105^{\circ}C$ and 16 hours, respectively. The measured contact resistance of the high temperature tested connector was 3.258 mV/A, and its measured insulation resistance was greater than $10\;G{\Omega}$ All specimens demonstrated uniform insulation characteristics, which could be seen to be in good condition. From the withstand voltage test results found before and after performing the high temperature operation test on the connector for cable connection, it was confirmed that the withstand voltage characteristics between all terminals were good. The insertion force of the connector connecting the internal wiring averaged 9.67 kgf. It was observed that the insertion force between the plug housing and the female terminal, and that between the plug housing and the male terminal, were 0.680 kgf and 1.27 kgf on average, respectively.