• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.456-458
• /
• 2008

RV 차량의 쿠션 패널을 생산하여 조립하는 공정은 작업자의 오류로 인한 불량이 많이 발생된다. 본 연구에서는 이러한 불량을 제거하기 위한 화상검사장치를 개발함을 목적으로 한다. 이러한 장치개발은 쿠션패널 고정용 지그, 카메라 인식영역, 이송을 위한 X-Y테이블, 카메라 모듈, 제어기 로 구성되어진다. 본 논문에서 제안한 화상검사장치를 설계하고 화상인식 프로그램을 통해 불량을 판정하여 화상검사 시스템의 타당성을 검증하였다.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.3
• /
• pp.189-200
• /
• 2003

This paper introduces the development of a three-dimensional jig design system for automotive body welding assembly. Recently, three-dimensional CAD systems have been introduced in the jig design area, because they reduce errors in design process and the design result can be used readily for virtual manufacturing simulation. However, to facilitate three-dimensional jig design, it is essential to customize three-dimensional CAD system for this specific design area. To accomplish this object, we first standardized the parts and units in a jig assembly, and then built the standard part library. We also developed the dedicated 3D design capabilities of jig units and a jig base. By using this system, design can be performed more intuitively, and verification and simulation of design results can be done more easily. The proposed system has been implemented using the UG/Open API of the Unigraphics system.

• Korean Journal of Optics and Photonics
• /
• v.28 no.3
• /
• pp.108-115
• /
• 2017

We report the assembly procedure and performance evaluation of a visible and near-infrared spectrometer in the wavelength region of 400-900 nm, which is later to be combined with fore-optics (a telescope) to form a f/2.5 imaging spectrometer with a field of view of ${\pm}7.68^{\circ}$. The detector at the final image plane is a $640{\times}480$ charge-coupled device with a $24{\mu}m$ pixel size. The spectrometer is in an Offner relay configuration consisting of two concentric, spherical mirrors, the secondary of which is replaced by a convex grating mirror. A double-pass test method with an interferometer is often applied in the assembly process of precision optics, but was excluded from our study due to a large residual wavefront error (WFE) in optical design of 210 nm ($0.35{\lambda}$ at 600 nm) root-mean-square (RMS). This results in a single-path test method with a Shack-Hartmann sensor. The final assembly was tested to have a RMS WFE increase of less than 90 nm over the entire field of view, a keystone of 0.08 pixels, a smile of 1.13 pixels and a spectral resolution of 4.32 nm. During the procedure, we confirmed the validity of using a Shack-Hartmann wavefront sensor to monitor alignment in the assembly of an Offner-like spectrometer.

• Mineral and Industry
• /
• v.28
• /
• pp.1-13
• /
• 2015

In this study, it was carried out separation process research and development to be able to produce high-grade tungsten concentrate form tungsten taken form Mongolia. In order to reduce treatment cost and increase separation efficiency the jig separation at first was applied for recovering the concentrate. Which reground would make the degree of liberation increase. Which was treated by shaking table to reject the gangue minerals from the first concentrate. Because the heavier product contains not only ferberite but also cassiterite, the product was treated by further dry magnetic separation to obtain the ferberite concentrate. Finally, the high-grade ferberite concentrate of 67.63% $WO_3$ could be obtained with recovery of 86.07% through the separation process developed in this study.

• Mineral and Industry
• /
• v.26
• /
• pp.13-21
• /
• 2013

This study is carried out experiments on various factors for improving the grade of low grade scheelite by Knelson concentrator prior to the main beneficiation process. Even though there are several gravity separators such as Jig, Spirals and etc. for rougher concentrate, the KC3 Knelson Concentrator was adopted to get better separation efficiency and beneficiating effects for pre-concentration of the low grade scheelite ore. The feed samples was prepared to minus 1mm in size by crushing and grinding. The important factors in the KC3 Knelson Concentrator test were examined in terms of the variations such as number of treatment, feed rate, rotation speed of bowl(G force), water flow rate, pre-removal of magnetic minerals, feed size and feed grade. According to the result of experiment, it shows that the important technical variations are limited in terms of number of treatment, feed rate, feed size and feed grade. The final result shows that the KC3 Knelson Concentrator obtains the scheelite pre-concentrate of about $3%WO_3$ grade and 90% recovery, respectively, from the feed containing about $0.8-1.0%WO_3$ grade.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.76-84
• /
• 2012

In this paper, two kinds of E-plane microstrip-to-waveguide transitions are optimally designed and fabricated for combining output power from multiple small-power amplifiers in a WR-28 waveguide because conventional K connectors cause unnecessary insertion loss and adaptor loss. The transition design is based on target specifications such as a center frequency of 35 GHz, bandwidth of ${\pm}500MHz$, 0.1 dB insertion loss and 20 dB return loss. Performance variation caused by mechanical tolerance and assembly deviation is fully evaluated by three dimensional electromagnetic simulation. The fabricated back-to-back transitions with 16 mm and 26.57 mm interstage microstrip lines show insertion loss per transition of ~0.1 dB at 35 GHz and average 0.2 dB over full Ka band. Also the back-to-back transition shows return loss greater than 15 dB, which implies that the transition itself has return loss better than 20 dB.