• Korean small business review
• /
• v.40 no.3
• /
• pp.1-24
• /
• 2018

The purpose of this study is verifying with corporate financial data that the required investment amount flow shows a similar pattern as times passed, in new product development by start-up company. In the previous paper, the same authors proposed the required investment amount flow as a 'New Product Investment Curve (NPIC)'. In this study, we have studied further in various types of companies. The samples used are accounting data of 462 companies selected from 5,873 Korean companies which were finished external audit in 2015. The results of this study are as follows; The average investment period was 3 years for the listed companies, while 6 years for the unlisted companies. The investment payback period was 6 years for listed companies, while 17 years for unlisted companies. The investment payback period of the company supported by big affiliate company (We call 'greenhouse company') was 14~15 years, while 17 years for real venture companies. When we divide all companies into 4 groups in terms of R&D cost and variable cost ratio, NPIC explanatory power of 'high R&D and high variable cost ratio group (Automobile Assembly Business) is best. Among the eight investment cost indexes proposed to estimate the investment amount, the 'cash 1' (operating cash flow+fixed asset excluding land & building+intangible asset, deferred asset change)/year-end total assets) turned out to be the most effective index to estimate the investment flow patterns. The conclusion is that NPIC explanatory power is somewhat reduced when we estimate all companies together. However, if we estimate the sample companies by characteristics such as listed, unlisted, greenhouse, and venture company, the proposed NPIC was verified to be effective by showing the required investment amount pattern.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.184-192
• /
• 2001

In this paper, we analyze the result of the conduced emission and susceptibility tests performed on the KOMPSAT-I ETB Platform. The ETB platform consists of the EM (Engineering Model) boxes developed to perform the electrical functional test. During the conducted emission test, we measured the instant waveform in time domain when each switch was turn on, and spectrum of the noise in the frequency range of 10 Hz up to100 MHz fur the steady state of the ETB. During the conducted susceptibility test, no malfunction and no serious damage of the electronic box were observed when a simulated noise waveform was applied to the DC power bus. The simulated waveform was obtained by adding the 6 dB-system margin to the worst case waveform measured from the conducted emission. This test was performed as co-development of the KOMPSAT-I with TRW in USA.

• Resources Recycling
• /
• v.10 no.3
• /
• pp.14-22
• /
• 2001

For the recycle of coal fly ash generated from power stations, we developed an electrocyclone system which can separate unburned carbon form coal fly ash, based on the fact that coarse fly ash particles contain higher amount of unburned carbon and unburned carbon particles are charged positively, and pure ash particles are charged negatively on contacting each other. Additionally, guide vanes were installed in the cyclone to control the cut size. Two types of electrode, stick and grid type, were designed to investigate the effect of electrode type. Results show that by introducing an electric field inside the cyclone, the yield increases by 5 to 15e1o. But the content of unburned carbon in the clean ash does not change significantly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.239-245
• /
• 2018

The importance of reliability in the development of weapons systems and reliability tests has been emphasized recently. Therefore, this study evaluated a reliability test design method of a bladder type accumulator and proposed a process for reliability test design. To design the reliability test of the accumulator, the main failure modes and failure mechanisms were investigated, and the main stress factors were analyzed to select the appropriate acceleration model. A steady - state reliability test was designed according to the number of samples, and the reliability level and accelerated life test time were calculated according to the acceleration factor computed using the selected acceleration model.

• 한국해양학회지
• /
• v.21 no.4
• /
• pp.236-244
• /
• 1986

This study was carried out for appreciable information on the proper habitats and feeding modes of some dominant polychaetes in the continental shelf of the East Sea during April, 1985. Among 95 polychaete species, we select ed 9 dominant species in terms of their occurring frequency, abundance and population density. These are Terebellides stroemi, Chaetozone setosa, Magelona japonica, Ampharete arctica, Aglaophamus sinensis, Nothria holobranchiata, Lumbrineris japonica, Myriochele gracilis, Notoproctus pacificus. Major food item s of these species are centric diatoms and detritus. The feeding modes of the the m are mainly surtace or subsurface deposit feeding, though two specters, M.holobranchiata and L. japonica, could be assumed to be potential carnivores. To a certain degree, most deposit feeders in the coarse sediments showed selectivity in feeding and tube building. The feeding mode, gut content and the tube structure, and the distribution pattern of dominant polychaetes correspond well with the habitat tharacters, e.g.the bottom topography, the source of food and the sediment composition.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.345-348
• /
• 2008

Recently, demand is caused that new building environment of value added rising demand on the lines of becoming bigger, manhattanize of structure and becoming high standard of structure in a construction site and influx of advanced foreign nation technique. To satisfy these requirements for alternative, structures applied to the PSC, PC is increasing. Double Tee Slab is possible for long length structure and applied to the method of construction. When assembling Double Tee Slab produced by the factory in the field, becamed carry-out topping concrete in upper, but occurred crack to slab line. There is no structural problem to crack occurred in upper, waterproof in maintenance and repair of structure due to a conservative cause several problems.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.135-145
• /
• 2000

Manufacturing Message Specification (MMS) is designed as a communication standard protocol, ISO/IEC 9506, on factory automation for messaging between heterogeneous programmable unit controller, PLC, NC, Robot, of different vendors on the networks. MMS is also a standard protocol of OSI reference model application layer, In this paper, we show an implementation of MMS over TCP/IP using ANSI-C programming language on the unix environment, and make java classification using java native interface (NJI) with MMS library. The use of java classification provides a basic environment ot overcome a difficult programming with different MMS application programming interface (MMS-I) which requires a siklled programming technique of graphic user interface (GUI). In this paper, we implement a MMS application program of the automated assembly model for printed circuit board based on WWW which shows the operation, control and monitoring of real manufacturing device (RMD) with web browser providing users for consistent user interface.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.351-357
• /
• 2006

Recently there is increasing the flow of hazardous chemical substances caused by industrial waste waters into a main river. It is needed to make the high treatment in drinking water treatment plants for reducing a health risk. Therefore, the monitoring of trace hazardous chemical substances by the industrial waste water inflow is available increasing economical efficiency of river management as well as reduction of risk. In this study, the most important substance among numerical and quantitative trace hazardous chemicals is Hexachlorobutadiene in an effluent of industrial wastes. However all items of GroupII which was included with semiconductor, electricity/electron and metal assemble was not detected. It means that we must consider the characteristics and behavior of load pollutants to water resources to select monitoring items. That was called 'preparatory monitoring'. We can reduce an economical consumption as well as risks from these pollutants using the preparatory monitoring.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.39-46
• /
• 2013

This study aims to develop a plastic aspheric lens for a 13-megapixel mobile phone camera by injection-compression molding. A mold for injection-compression molding experiments was fabricated with a movable upper plate and four springs. During cavity filling for an aspheric lens with a thickness ratio of 2, a weldline was formed under conventional injection molding, whereas no weldline was formed under injection-compression molding with a compression stroke of 0.3 mm. The flow patterns were in good agreement with the simulation results. The birefringence decreased as the compression stroke increased, and the birefringence produced by injection-compression molding was very low and more uniform compared with that produced by injection molding. In addition, the bulk birefringence of an assembly composed of four plastic lenses was significantly affected by the orientation of the lenses to be mounted.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.26 no.2
• /
• pp.135-144
• /
• 2021

End-member (EM) analysis of grain-size distribution data for detrital fractions of IODP Site U1430 core sediments from the South Korea Plateau (East Sea) identified 4 EMs grain-size populations (EM) which represent either Asian dusts (Hwangsa) or volcanic ashes. The two EMs representing volcanic ashes consist of fine and coarse glass shards with various morphologies and constitute 0-82% of the total grain-size distributions. The 33% mixing percentage of volcanic ash EMs seems appropriate for a cut-off value for discrimination of grain-size data influenced by volcanic ash input from those dominated by Hwangsa.