• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.584-591
• /
• 2020

Reliability is an important factor in weapons systems. Low reliability causes the weapons system to fail to function properly, which directly leads to the weakening of combat capability. This paper classifies the structure of the 5.56 mm rifle, which is currently used by the Korean army, into a total of seven assemblies and describes the eight functions necessary for the rifle to operate normally. In addition, the concept of reliability was defined as the MRBF, and the Poisson process model and TTT plot were explained as a reliability analysis theory for the repair function system. Next, the field-data obtained by defining failure as the replacement of parts other than periodic exchange of parts were refined, and the reliability was analyzed by entering the refined field operation specifications into the Minitab program. As a result, the reliability of the rifle was determined to be 251.73. The assembly parts that required improvement was identified as the barrel, lower body, and butt stock assembly, and 10 detailed parts needed to be improved. Finally, the limits of the reliability analysis using the field-data currently available for small caliber firearms were considered.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.1
• /
• pp.48-59
• /
• 1999

Objectives. This study was conducted to evaluate the association between upper extremity musculoskeletal symptoms and Rapid Upper Limb Assessment(RULA) in vehicle assembly line workers. The goal of this study is to show the feasibility of RULA as a checklist for work related musculoskeletal symptoms (WMSDs) in Korean workers. Methods. The total number of 199 people from the department of assembly and 115 people from the department of Quality Control(QC) in automotive plant were subjects for this cross sectional study. A standard symptom questionnaire survey has been used for the individual characteristics, work history, musculosketal symptoms and non-occupational covariates. The data were obtained by applying one-on-one interview for the all subjects. RULA has been applied for ergonomic work posture analysis and the primary ergonomic risk sure was computed by RULA method. Association between upper extremity musculoskeletal symptoms and RULA were assessed by multiple logistic regression analysis. Results. A total of 314 workers was examined. The prevalence of musculoskeletal symptoms by NIOSH case definition was 62.4%. The distribution of musculoskeletal symptoms by the part of the body turned out to be following; back:41.4%, neck: 32.8%, shoulder: 26.4%, arm: 10.5% and hand:29.3%. The relationship of the individual RULA scores were statistically significant for the prevalence of musculoskeletal symptoms. As the result of the multiple logistic regressioin analysis, grand final score (OR=2.250 95% CI: 1.402-3.612) was associated with musculoskeletal symptoms in any part of the body.; upper arm score(OR=1.786 95% CI: 1.036-3.079) and posture score A(OR=1.634 95% CI: 1.016-2.626) in neck; muscel use score(OR=3.076 95% CI:1.782-5.310) and posture score A(OR=1.798 95% CI: 1.072-3.017) in shoulder; upper arm score(OR=1.715 95% CI: 1.083-2.715) and muscel use score(OR=2.057 95% CI:1.303-3.248) in neck & shoulder; muscle use score(OR=10.662 95% CI: 3.180-35.742) in arm; writst/wist score(OR=2.068 95% CI: 1.130-3.786) and muscle use score(OR=2.215 95% CI: 1.284-3.819) in hand & wrist.; muscle use score of trunk (OR=2.601 95% CI: 1.147-5.901) in back. Conclusions. Musculoskeletal symptoms of the extremities were strongly associated with individual RULA body score. These results show that RULA can be used as a useful assessment tool for the evaluation of musculoskeletal loading which is known to contribute to work-related musculoskeletal disorders. RULA also can be used as a screening tool or incorporated into a wider ergonomic assessment of epidemiological, physical, mental, environmental and organizational factors. As shown in this study, complement of the analysis system for the other risk factors and characterizing between the upper limb and back part will be needed for future work.

• The Korean Journal of Malacology
• /
• v.7 no.1
• /
• pp.30-48
• /
• 1991

한국해역 종합 해양자원도 작성연구(남해)의 일환으로 저서생물 분포 연구를 위한 조사가 1990년 7월과 8월에 남해에 위치한 83개 조사정점에서 수행되었다. 각 정점에서 van Veen그랩으로 3회씩 채집된 저서 생물 표본 가운데 연체동물만을 선별 그들의 분포 양상을 파악하고자 종 동정과 함께 군집구조 분석을 하였다. 조사에서 채집된 연체동물은 모두 679개로 다섯개 강에 102종으로 동정되었으며, 이매패류가 출현종수(84.3%)에서나 출현개체수(92.3%)에 있어서 절대우점하였다. 전체 연체동물군집에서 우점하는 일곱 종(이매패류 여섯 종, 무판류 한 종)이 전체 출현개체수의 61.0%를 차지하였다. 남해의 연체동물은 종은 다양한 반면에 서식밀도나 생물량은 매우 빈약하였다. 출현종의 서식 유무에 따른 유사도로써 집괴분석한 결과 다섯개의 조사정점군으로 나누어지고, 이 들은 특징적인 분포 특성을 갖는 두 정점군과 혼합된 특성을 나타내는 세정점군으로 대별되었다. 전자의 두 정점군은 Raetellops Pulchella와 Periploma otohimeae로 대표되는 황해의 저층냉수의 영향을 받는 세립퇴적물 군집과 뚜렷한 대표종은 없지만 대마난류의 영향을 받는 이질성의 조립퇴넉물 군집으로 정의할 수 있었다. 대마난류의 영향을 받는 정점군의 군집은 황해저층냉수의 정점군에 비해 종 다양도는 높지만, 서식생물량은 현저히 적었다. 아울러 연체동물의 분포와 남해의 퇴적환경이나 수괴의 조성과 변화를 고려하여 남해에 서식하는 저서생물 군집에 있어서 네 개의 분포구역이 있을 것으로 추정하여 그 범위와 경계를 제안한다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.256-257
• /
• 2003

반도체 와이어 본딩(wire-bonding) 조립공정에 사용되는 검사용 현미경 광학계를 설계하였다. 이러한 와이어는 리드프레임에 대해 $\pm$ 1 mm의 단차를 가진다. 이 때 리드프레임은 6배로 관찰하며, 와이어 부분은 2배로 관찰하고자 한다. 그러나 와이어의 단차로 인해 물체거리가 변하게 되며, 일반 광학계로는 배율도 변하게 된다. 물체거리가 변해도 동일한 배율을 가지는 광학계를 설계하기 위해 유한 물점용 3군 줌 광학계를 목적에 맞게 변형시켰다. (중략)

• Journal of Preventive Medicine and Public Health
• /
• v.15 no.1
• /
• pp.33-46
• /
• 1982

In Korea BCG vaccination has been employed as the main control measure for tuberculosis since 1962. Recently, the protective efficacy of BCG against tuberculosis has been controversial worldwide. A case-control study was conducted to evaluate the efficacy of BCG in Korea which has a high prevalence of tuberculosis(2.5%). The study subjects were children under the age of 14 years who were hospitalized and diagnosed as tuberculosis in three general hospitals in Taegu City during last 6 years ($1975{\sim}1980$). Among 416 hospitalized tuberculous patients, 314 cases were confirmed as to the presence or absence of the BCG scar. A control group was selected from the same hospital patients of the same period as the cases. The control group was other than tuberculous patients whose distribution of age, sex and residence were the same as the cases. The results obtained are as follows: For all forms of tuberculosis, the relative risk and the protective efficacy of BCG were 3.5 and 71.8%. The efficacy was higher among female than among male (78.6% vs. 65.8%). The efficacy was higher among the one year and above than among less than 1 year of age. For tuberculous meningitis, the relative risk and the protective efficacy of BCG were 3.9 and 74.3 %. The efficacy was statistically significantly higher among female than among male (p<0.05). The relative risk and the protective efficacyt of BCG for uberculous meningitis combined with miliary tuberculosis and combined with pulmonary tuberculosis represented 6.9, 85.6%, and 7.4, 86.5%, respectively. On the other hand, the relative risk and the protective efficacy of BCG for miliary tuberculosis were 2.1 and 51.6%, and for pulmonary tuberculosis, 2.3 and 54.7%, respectively. From these results, it appears that BCG vaccination is an efficient preventive measure in Korea where tubercluosis is prevalent. Thus the routine BCG vaccination should be continued.

• Journal of the Korean earth science society
• /
• v.31 no.7
• /
• pp.708-719
• /
• 2010

The Gochang-gun Dongho macro-tide pocket-type beach, located on the southwestern coast of Korea, is investigated in terms of the seasonal variations of surface sediment and sedimentary environment. Surface sediments of 45 sites in four seasons (May 2006-February 2007) are sampled across three survey lines (15 sites in each survey line). The surface sediments of the Dongho Beach are mainly composed of fine to coarse sands, and the ratio of fine sand is the largest. The average of grain size is the coarsest in the summer. The spatial distribution of surface sediments shows a coast-parallel band of fine and medium sands during three seasons of spring, fall, and winter, whereas medium sands dominated in the northern part of the study area during the summer. These results suggest that a tide is more effective than a wave in the surface sediments of the Dongho Beach during the summer.

• Journal of the Korean earth science society
• /
• v.33 no.6
• /
• pp.497-509
• /
• 2012

The Gochanggun Kwangseungri macro-tide open-coast beach, located in the southwestern coast of Korea, was investigated in terms of the seasonal variations of surface sediment facies and sedimentary environment. Surface sediments of 45 sites in four seasons (May 2006 - February 2007) were sampled along three survey lines (15 sites in each survey line). The surface sediments of the Kwangseungri Beach are mainly composed of fine-grained sands, and its mean grain size is the coarsest in winter. Mud facies partly exists in summer, whereas it is nearly absent in winter. The spatial distribution of surface sediments shows a coast-parallel band of fine and medium sands during spring, fall, and winter. In the northern part, the study area is dominated by fine sands during summer, whereas by coarse sands during winter. These results can be interpreted that tide is more effective than wave on the surface sediment distribution of the Kwangseungri Beach during the summer season.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.62-69
• /
• 2023

Re-damage is frequently occurring for various reasons, including material factors, external factors, and factors caused by poor construction in concrete cross-section restoration work, so it is necessary to identify the cause and improve it. Cement-based materials are the most commonly used maintenance materials for concrete structures, and in particular, additional cross-sectional restoration work may be carried out due to re-damage such as cracks and excitement due to dry contraction of the repair material. In this study, a basic study was conducted to identify the characteristics of concrete while diversifying the maximum dimensions and assembly rate of thick aggregates to examine the effects of using thick aggregates in repair materials. As a result, the slump of concrete increased as the maximum size of thick aggregates increased, and the amount of air content was measured 1.88 to 2.35 times higher in the mixing using aggregates with a maximum aggregate size of 5 mm or more compared to the mixing group with a maximum aggregate size of 10 mm or more. It was found that compressive strength was greatly affected by the performance rate of thick aggregates. The compressive strength was measured the highest in the mixture using thick aggregates with the highest performance rate of 20 mm, and the compressive strength of the mixture with the lowest performance rate was more than 45%. As a result of the dry shrinkage measurement, the dry shrinkage was the lowest as the performance rate of the thick aggregate increased according to the change in the maximum dimensions and assembly rate of the thick aggregate, and the lowest performance rate was the largest in the mix. Through this study, it was confirmed that adjusting the particle size by diversifying the maximum dimensions and assembly rate of thick aggregates used in concrete structure repair materials can improve strength and workability and reduce dry shrinkage.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.133-143
• /
• 2000

목 적: 통상적인 근관성형 과정에서 근관형태의 직선화 경향을 발견할수 있으며 그 결과 만곡이 심한 근관에서 이상적인 근관 형태를 얻기가 어려움으로 인해 이를 극복하기 위한 많은 기구들과 근관 성형법들이 개선되었고 소개되었다. 본 연구에서는 수통형 Stainless Steel K-file, Niti 엔진 구동형 Profile .04와 Quantec LX file를 이용하여 만곡 근관의 성형 후 최종 근관 형태를 비교하고 평가하고자 한다. 방 법: 본 실험은 Bramante등의 방법을 변형하여 술 전의 근관 형태와 술 후의 근관 형태를 비교하였다. Schneider의 방법에 따라 $12^{\circ}$에서 $68^{\circ}$ 이내에 만독도를 가진 45개의 발거된 상하악 대구치의 근심근관들을 선택하여 15개씩 3개의 군으로 나누고 알루미늄으로 제작된 mold에 투명한 교정용 레진으로 매몰하였다. 근첨에서 2.5, 5, 8mm 지점에서 절단하고 각 mold에 재조립한 후 다음과 같이 근관 성형을 시행하였다. 제 1 군은 SS K-file를 이용하여 Step-back 방법; 제 2 군은 NiTi 엔진 구동형인 Profile .04 ; 제 3 군은 NiTi 엔진 구동형인 Quantec LX file로 근관 성형하였다. 술 전과 술 후에, 각 시편들을 입체 현미경으로 사진 촬영하여 근관 중심 위치 이동률, 근관성형 후 면적과 모양, 잔존 상아질의 최 소 두께를 Sigma scan / image software program으로 계산하고 One way ANOVA로 통계적 유의성을 검증하였다. 결 론: 1. Profile .04와 Quantec LX는 SS K-file보다 근관성형시 근관의 본 형태를 유지하는 경향이 있었으나 통계적으로 유의성이 없었다(p>0.05). 2. 근관 성형 후 면적은 Profile .04 엔진 구동형 NiTi file를 이용한 군이 다른 군과 비해 가장 적었으나 통계적으로 유의성이 없었다(p>0.05). 2. 모든 방법들은 같은 부위에서 같은 방향으로 전이되는 양상을 보였다. 즉, 근단부에서는 바깥쪽으로, 중앙부에서는 안쪽으로 전이하려는 경향이 있었다. 그러나, 치관부에는 그러한 법칙이 적용되지 않아 전이되는 양상이 안쪽이나 바깥쪽으로 구별되지 않게 일어났다. 3. 술 후에 근관의 모양은 원형, 타원형, 불균일한 형태들이 다양하게 나타났지만, Profile .04와 Quantec LX를 사용했을 때 주로 원형 형태의 근관을 보여주었으며 Stainless Steel K-file은 타원형이나 불균일한 근관 형태를 보였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.130-135
• /
• 2019

This study performed the quality improvement of a red dot sight for a 40 mm grenade launcher through parallax reduction. The red dot sight cited in this study is currently in mass production for military use as a non-weapon system. While the red dot sight's parallax currently meets requirements, slightly greater error was observed on the outside of effective optical area of the reflection lens compared to other sights. Parallax is easily affected by eye movement, which can result in aiming error. To improve the red dot sight's quality, this study analyzed why parallax is observed in the effective optical area of the reflection lens and how to reduce it. As a result, the red dot sight demonstrated lower parallax error using the new optical system design with an increased reflection lens thickness and modified components configuration related to the reflection lens assembly. Parallax was calculated and simulated by using a particular program to verify that it decreased. This improvement for the 40 mm. grenade launcher red dot sight more than satisfies requirements, offers advanced capabilities for users, and as a result, successful operation carryout.