• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.557-560
• /
• 2009

본 연구에서는 건물의 규모, 용도 및 형식 등에 따라 다양하게 요구되는 성능에 대응할 수 있도록 하기 위한 성능설계에 대한 개념을 검증하고, 강구조 건축물의 특성을 고려한 성능레벨 및 성능한계에 대한 분류방법을 제안하였다. 또한 강구조 건축물의 경우 강도가 높고 경량인 특성에 의해 다른 구조형식에서는 크게 고려하지 않아도 되는 거주성능 및 진동특성을 제어하여 기능을 유지하기 위한 성능레벨을 설정하여 구조물이 항복하기 전의 성능레벨을 기능유지 및 무손상의 2단계로 제시하고, 이 때의 한계치를 기능한계 및 손상한계로 구분하였다. 강구조 건축물의 손상한계를 정의하기 위해 강구조 건축물의 설계 예를 이용하여 항복 층간변형각을 조사하였다. 그 결과 구조물의 손상발생을 억제할 수 있는 손상한계를 규정하기 위해 주로 사용하고 있는 층간변형각은 구조형식 및 설계방법에 따라 편차가 크게 나타나고 있으므로 손상한계치의 층간변형각을 임의로 설정하는 것은 매우 어려우며 향후 이에 대한 해석적, 실험적 검증이 필요할 것으로 판단되었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.3
• /
• pp.165-171
• /
• 2013

The fact that tidal residuals are detected greatly at the tide-dominated region implies that tide component has still remained in the tidal residual. Auto-correlation function analysis also show that the auto-correlation coefficients are conspicuous near tidal periods at the Western Coast. A wavelet method was used to analyze characteristics of the short period or tide-relevant residuals. Considering the results that tidal period is prominent at the tide-dominated region, that seasonal variation is trivial at the short periods, and that shallow tidal period is conspicuous at Mokpo, the short period can be considered to be correlated with tide modulated surge. The result also shows short period components stem mainly from tide-forecasting error and tide-surge interaction. Thus tide modulated surge must be distinguished from meteorological surge.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.2 no.2
• /
• pp.104-111
• /
• 1990

The water level variation due to the Typhoon around the coast of Pusan in the southern sea of Korea is investigated from the observed tidal record. Water level variations at six stations along the coast are discussed in association with the meteorological data. The characteristics of storm surge at Pusan during Typhoon Thelma in 1987 is analysed using the observed data, and it is performed the numerical simulation of storm surge which includes a inverse barometric effect due to the horizontal distribution of sea sur-face pressure. From the calculation results, the peak value of storm surge in the coast of Pusan was occur-red around the 01：00 July 16th, which is well coincident with the observed water level variation at the Kadukdo. However, the calculated value at the Pusan TBM is inconsistent with the observed one, which is regarded due to a reason that the Tidal Bench Mark (TBM) locates in the channel. In the computation results, the maximum surge occurs at the coast of Nakdong estuary, which is considered primarily due to a topographic effect, and water level variation exceeded 2.5 meter in these areas while only about 60 cm in another coasts.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.583-586
• /
• 2002

Molding properties of etched surface pattern are presented. Specimens, whose surface patterns are made by print-type etching, are investigated. The molding properties of surface pattern are estimated with roughness deviation of surface pattern on part and mold. The etching properties are related to physical properties of plastic materials and surface roughness of etched pattern. Also, flow mark and gate location can give influence on surface pattern molding. The experimental result can contribute to good molding of surface pattern in injection molding.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.25-32
• /
• 2003

Molding properties of etched surface pattern are presented. Injection molding has given attention on improving dimensional accuracy and productivity. However, the molding of etched surface pattern on plastic parts is not researched relatively for its additional values, which can meet design function and customer's attraction. Specimens, whose surface patterns are made by print-type etching, are investigated. The molding properties of surface pattern are estimated with roughness deviation of surface pattern on part and mold. The etching properties are related to physical properties of plastic materials and surface roughness of etched pattern. Also, flow mark and gate location can give influence on surface pattern molding. The experimental result can contribute to good molding of surface pattern in injection molding.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.744-747
• /
• 2005

무선설비규칙은 전파법 제45조${\cdot}$제47조 및 제 58조의 규정에 의하여 무선설비와 전파응용설비의 기술기준 및 안전시설기준을 규정하고 있다. 무선기술의 급속한 발전과 전파이용환경의 변화를 고려하여 규칙에 대한 개정이 논의되고 있다. 본 논문에서는 국내의 전파 관련 법령 체계를 먼저 살펴보고 무선설비규칙에서 개정 논의되고 있는 공중선계 기술기준, 수신 설비의 감도 및 명료도 조건, 공중선전력의 허용편차 등에 대하여 국내외 규정 현황을 분석하여 관련 규정의 개선방안과 기대효과에 대하여 작성하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.293-293
• /
• 2012

마그네트론 스퍼터링으로 Al과 Al 합금(Al-3wt%Si, Al-10wt%Si) 박막을 코팅하였다. 기판은 냉연강판과 Si 웨이퍼를 사용하였으며 알코올과 아세톤으로 초음파 세척 후 진공용기에서 플라즈마 청정을 실서히였다. 시편 청정이 끝나면 기판은 0, 30, 45, 60, 90도의 다양한 각도로 고정시켜 Al과 Al 합금 박막을 코팅하였다. 빗각 증착 기술(Oblique Angle Deposition: OAD)은 입사증기가 기판과 수직하지 않게 기울여 코팅하는 방법으로 조직을 다양하게 제어할 수 있다. 빗각으로 코팅한 순수한 Al 박막의 경우, 동일한 두께의 박막보다 반사율 및 표면조도, 내식성이 향상되는 결과를 얻었다. 따라서 본 연구에서는 빗각 및 Si 함유량이 반사율 및 표면조도, 내식성에 미치는 영향을 비교 분석하였다. 기판의 위치에 따른 변화를 관찰하기 위해 시편은 좌, 우, 중간으로 구분하여 분석하였다. 단일층 박막의 경우 타겟과의 거리에 따른 두께 편차가 발생하였으며 이러한 두께 편차를 해결하기 위한 방법으로 동일한 각도를 유지하며 반대 방향으로 회전시켜 다층구조로 박막을 제조하였다. Si 함유량 및 빗각에 따른 반사율 및 표면조도를 분석하였으며 내식성 평가를 위한 염수 분무 테스트도 실시하여 각각의 공정 변수에 따른 결과를 비교 분석하였다.

• Journal of the Korean earth science society
• /
• v.38 no.6
• /
• pp.421-426
• /
• 2017

In this study, we selected three representative granite samples and conducted petrological observation to establish the Korean geostandards. Samples were taken from the two Jurassic (KJG-1, KJG-2) and one Cretaceous (KCG-1) granites in South Korea. The powder samples were prepared by the standard pulverization process, and glass beads were made for geochemical analysis using X-ray fluorescence (XRF) method, and finally, major element contents of the samples were acquired. The analytical data are shown with mean, standard deviation and relative standard deviation. The accuracy of the analysis was confirmed within an estimated error range of about 5% by comparing the recommended true values of the USGS and GSJ geostandards. Also, we checked the analytical precision by calculating a relative standard deviation of about 3% from the XRF analytical results for the three samples.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.1
• /
• pp.12-31
• /
• 1999

Topex/Poseidon satellite altimetric data are used to estimate characteristics on the oceanic and atmospheric correction factors, and the mean sea level and its variations in the Yellow Sea, the East China Sea and the East Sea from September 1992 through August 1994(70cycles). For the atmospheric correction factors, the variations of dry troposphere, humid troposphere, ionosphere and inverted barometer were very small as a few centimeters, but the variations of electromagnetic bias were higher than other factors. For the oceanic correction factors, the variations of ocean tide(35cm in track 127 and 60cm in track 214) showed high ranges compared to elastic tide(5cm in track 127 and 1cm in track 214) and loading tide(1.8cm in track 127 and 1cm in track 214). It should be understood that the variations of ocean free surface is mainly under the influence of, firstly, ocean tide and, secondly, electromagnetic bias. Mean sea level in the Yellow Sea are higher than in the rest of Seas. Then its range generally comprised between -60cm and 210cm with mean value of about 100cm. Also its variations showed high values in the Yellow Sea and East China Sea, especially 5.689cm in Youngampo. This result is mainly due to the effects of local topography and tidal current.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.4
• /
• pp.29-36
• /
• 2009

The fuzzy controller of the FFH(Fuel Fired Heater) used for vehicle is designed in this study. Two of the most important things of the pre-heater are how fast it can be at the set temperature and how to reduce the temperature deviation in the space to a minimum. The temperature deviation of the existed FFH with PI controller for temperature controller was reduced. Also, the fuzzy controller improved the response characteristics, and then the performance was inspected. When setting the temperature in this designed fuzzy controller, it took 12 minutes in the existed PI control method to reach $25^{\circ}C$. However, it took 9 minutes and 20 seconds in the fuzzy control method. Therefore, it is proved that the fuzzy controller is better than the existed one with fast response performance as 2 minutes 40 seconds. The temperature deviation was $2.4^{\circ}C$ in the existed control method but $1.6^{\circ}C$ in the designed fuzzy controller. Accordingly, the temperature deviation was improved too.